Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Franklin Park
Custom windows and doors in Franklin Park usually cost between $900 and $4,800 per opening, depending on size, shape, and wind-load rating. Most Franklin Park homes need impact-rated units that meet Florida Building Code, which adds roughly 15 to 25 percent over a non-rated custom window. TruePane has installed custom-shaped windows, oversized glass panels, and architectural grilles throughout Franklin Park long enough to know exactly what the county inspector looks for. If you’re weighing options, call us at (754) 238-2201 for a straight answer and a free written estimate.
Franklin Park is not a place where you guess at a window spec. The homes here, many built for Space Coast aerospace workers between the late 1950s and the mid-1970s, sit in a windborne debris region that the Florida Building Code treats as serious business. We know these block ranch houses, their jalousie windows, their corroded aluminum frames, and the way salt air chews through cheap hardware. That local knowledge is the difference between a window that passes inspection the first time and one that gets red-tagged.
Why TruePane Windows & Doors Is Franklin Park’s Preferred Custom Windows & Doors Company
Homeowners in Franklin Park tend to call us after they’ve been burned once. They bought a window from a shop that promised a deal, then watched the county inspector shake his head. Our reputation in this community is built on the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves the driveway. No arguing later about who covers what.
Franklin Park customers regularly mention two things in their reviews: the technician showed up when we said he would, and the permit passed without a correction. Those are not small things on a custom window job. Our technicians are background-checked and uniformed, and they measure every opening twice. When a homeowner on a street off Franklin Park Road asks whether a certain custom round-top window will meet the DP rating for that elevation, they get a paper quote with manufacturer lines side by side, not a verbal guess.
We keep crews scheduled for Franklin Park work on a rolling basis, which means a homeowner off MLK Boulevard or near the old aerospace housing blocks is not waiting on a regional dispatch that may or may not show. Dale Kessler founded this company in 2008 on a rule that still governs how we work: if the pane is not true, the job is not done. That rule applies to every custom arch, every oversized fixed panel, every grille pattern we set in Franklin Park.
Our Custom Windows & Doors Services in Franklin Park
Our Custom Windows & Doors team handles the full range of custom work homeowners in Franklin Park actually ask for. The common thread is this: each opening has to meet Brevard County wind-load requirements, and the product has to be ordered to the exact rough opening, not forced into a stock size.
Custom Shape Windows
Franklin Park’s original ranch homes were not built with arches, circles, or eyebrow windows. When a homeowner adds a custom half-round over a front door or converts a jalousie Florida room into conditioned space, the shape itself becomes a wind-load challenge. A round-top window on a street-facing elevation in Franklin Park often needs a DP 50+ rating and Miami-Dade NOA approval, because wind pressure concentrates at the curved apex. We order from manufacturer lines that actually produce rated custom shapes, including CGI and ES Windows, not shops that sell an unrated decorative unit and hope the inspector does not look closely.
Oversized Glass Panels
Fixed glass walls and large picture windows are the single most common custom request we hear from Franklin Park homeowners who want to open up a back wall to the yard. What most people do not realize is that an oversized panel on a 1960s block house often needs a structural header upgrade first. The existing header was sized for a small slider, not an eight-foot span of laminated impact glass. The glass itself weighs hundreds of pounds, and without the right header, the frame deflects and the panel cracks along the stress line in the first tropical storm. We quote the header work as a line item, in writing, so you know the full cost before we start.
Architectural Grilles & SDLs
Grilles are where a custom window stops looking like a replacement and starts looking like it belongs on the house. In Franklin Park, we see a lot of ranch homes where the original window had no grilles at all, just a flat aluminum frame. Homeowners who want a more traditional look ask for simulated divided lites, or SDLs. These sit between the glass panes and affect the unit’s overall DP rating only minimally, but they must be ordered as part of the original glazing package. You cannot add them later. We quote SDL patterns from Andersen, Pella, and Marvin side by side so you see the actual price difference, not a vague upgrade charge.
Commercial Storefront Glazing and Curtain Wall Systems
Franklin Park has a small but active commercial strip along its main corridors, and those storefronts face the same wind code as the houses. A commercial storefront glazing job in Franklin Park means tempered impact glass, rated framing, and a permit package that a code official can verify without a site visit from a regional engineer. For larger curtain wall systems on multi-unit buildings, we coordinate the structural engineering and the product submittals so the approval does not stall for weeks. The same rule applies: both warranty layers get registered before we leave the site.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Park
We are an authorized installer for more than a dozen manufacturer lines, and for Franklin Park work we typically quote CGI, ES Windows, and CWS because those three have strong Miami-Dade NOA catalogs and proven corrosion-resistant hardware. If a homeowner already has Andersen or Pella windows and needs a matching custom replacement, we handle that too. Because Franklin Park is a local service area for our crews, we can get warranty parts and replacement sashes moving quickly, without a weeks-long backorder from a distributor that does not know the county’s paperwork requirements.
Common Custom Windows & Doors Problems We See in Franklin Park Homes
- Corroded aluminum frames on jalousie windows. The louvered glass-slat windows installed throughout Franklin Park during the NASA-era housing boom have aluminum frames that corrode at the jamb from decades of Atlantic salt air. By the time a homeowner calls us, the slats often will not close tightly, and the unit cannot pass a wind-mitigation inspection at any price.
- Custom windows ordered with the wrong DP rating. A cheap shop sells an impact-rated unit without checking the home’s wind zone or the window’s location on the structure. The window arrives, the county inspector checks the label, and the permit fails. The homeowner is left holding a window that cannot legally be installed.
- Oversized glass panels on undersized headers. A 1960s block ranch was not framed for a 10-foot fixed glass wall. When the panel is installed without a header upgrade, the frame deflects under the glass weight, and the stress crack shows up during the first decent storm.
- Wood door jambs swelling in the humidity. Franklin Park’s coastal humidity causes wood jambs on older doors to swell and rot, especially on north-facing entries that never dry out. A custom door replacement needs corrosion-resistant hardware and a jamb design that will not bind in July.
Pricing for Custom Windows & Doors in Franklin Park, FL
A standard custom rectangular impact window in Franklin Park runs $1,200 to $2,800 per opening, installed. Custom shapes, like arches or rounds, run $2,200 to $4,800 because of the rating requirements and the longer manufacturer lead time. Oversized fixed glass panels run $3,000 to $7,500, and that range includes the structural header work most 1960s block homes need. Architectural grilles add $150 to $400 per opening depending on the pattern and manufacturer.
Three factors drive cost in Franklin Park more than anything else: the DP rating required for the window’s location, the opening size, and whether the existing rough opening is square enough to accept a custom unit without reframing. A written quote from us shows each of these as a separate line item. That is a square deal. Call (754) 238-2201 to schedule your free estimate; we will measure twice and put the numbers in front of you before you commit to anything.
We Also Serve Cities Near Franklin Park
Franklin Park homeowners are our focus, but our crews also cover Franklin Park neighbors in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are in one of those communities and need custom windows or doors that will pass Brevard County inspection, the same team and the same written warranty apply.
Serving Franklin Park, FL - Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Franklin Park
Yes. Franklin Park sits in a windborne debris region, so the Florida Building Code requires every replacement window and door to be either impact-rated or protected by an approved shutter system. Most homeowners choose impact-rated units because shutters must be deployed by hand before every storm, and insurance companies discount impact glazing far more than shutter-protected openings. Call (754) 238-2201 and we will tell you exactly what your home’s elevation requires.
In Franklin Park, a straight window replacement permit typically clears in one to three business days, and the final inspection happens within a day or two of installation completion. Custom shapes and oversized panels take longer at the permit counter because the product submittals are larger, but two weeks from permit application to final inspection is a realistic window. We file the permit, schedule the inspection, and meet the inspector on site so you do not have to take a day off work to stand next to him.
Because wind pressure is not uniform across a wall. The Florida Building Code assigns higher design pressure requirements to corner openings and areas within three feet of a building edge, and a 1965 block home was likely framed with a larger rough opening that alters the glass-to-frame ratio. Your neighbor’s 2005 house was built to a different code edition with different opening dimensions. A window that passes on their wall may not pass on yours. We check the wind zone, the opening location, and the structural condition before we order anything.
Yes, provided the glass itself carries a Miami-Dade NOA approval and the supporting header is engineered for the weight and wind load. An impact-rated fixed panel does not need shutters, and it actually earns the largest wind-mitigation insurance credit. The catch is that the header work and the glazing have to be approved as a package. We have done exactly this on Florida rooms throughout Franklin Park, including homes where the original jalousie wall was removed entirely.
Only if the window carries a valid Miami-Dade NOA or Florida Product Approval that specifically covers that shape and that DP rating. The inspector checks the label against the NOA number, not against the shape of the glass. We register both manufacturer warranty layers and keep the product approval documentation with the permit file, so when the inspector asks, the paper is already there. If a custom shape does not have a valid approval for Franklin Park’s wind zone, we will not sell it to you. It would fail, and we would be the ones standing there when it did.
On a 1960s concrete-block ranch off Franklin Park Road, our crew replaced a corroded jalousie window and a sagging aluminum slider with custom-sized Andersen 100 Series casements using stainless steel fusion-welded frames and corrosion-resistant hardware, plus new flashing tape around the rough opening. The homeowner’s wind-mitigation inspection then passed with credits for impact-rated glazing, cutting their annual Brevard County insurance premium by over $400. That is what a proper Franklin Park window job looks like: the right rating, the right hardware, and the paperwork to prove it.
If you own a home in Franklin Park and you are tired of windows that fog, bind, or leak, call (754) 238-2201. We will come out, measure every opening, and give you a written quote that shows the product, the DP rating, the warranty terms, and the total price. A live person answers the phone. We stand behind the work, and we will be here in Franklin Park thirty years from now to prove it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Franklin Park and Brevard County with custom windows and doors that meet Florida Building Code the first time.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.