Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterDoor Installation in Miami, FL - What It Costs and What to Expect
Door installation in Miami typically runs $850 to $4,200 for a standard entry door, while custom or impact-rated doors range from $2,500 to $12,000 or more depending on size, material, and hardware. Most single-door replacements are completed in one day. At TruePane Windows & Doors, we have provided Door Installation - Miami since 2008, and every job is covered by our Done Right Promise and The Keystone Standard, with both warranty layers registered in writing before our truck leaves your driveway. Call (754) 238-2201 for a free, line-item estimate.
Trusted Door Installation for Miami Homeowners
A door that binds in July, lets daylight through the jamb, or groans when you open it is not a minor annoyance. In Miami, it is a liability. Humidity swells frames, salt air corrodes hinges and thresholds, and hurricane season tests every seal. We have been called to homes in Coral Gables, Kendall, and Little Havana where a poorly hung door had been “fixed” twice before anyone discovered the rough opening was out of square by three-quarters of an inch.
Dale Kessler founded TruePane Windows & Doors in 2008 on a rule he learned as a second-generation glazier: if the pane is not true, the job is not done. That rule applies to every door we hang. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before leaving your driveway. A live person answers our phone 24 hours a day, 7 days a week. Call (754) 238-2201 and you will speak to a person in Miami, not a voicemail tree.
What Our Door Installation Service Includes
Every TruePane door installation begins with an inspection of the rough opening, the existing jamb, and the threshold. We do not reuse rotten framing, we do not caulk over gaps, and we do not hang a new door on hardware that has been fighting the same war for twenty years. Here is what we install and how we approach each type.
Entry & Swing Doors
An entry door is the first line of defense against Miami heat, humidity, and storm weather. A standard swing door should close square, seal tight at all four corners, and swing smoothly without dragging the threshold. We install entry doors with adjustable thresholds, multi-point locks where the manufacturer offers them, and weatherstripping rated for coastal humidity. If your current door has shifted enough to show daylight at the strike plate, the hinge screws are probably losing their grip in the jamb, and surface fixes will not hold. We replace the weak wood, shim the frame correctly, and set the door so it operates the same in January and August.
Double & French Doors
Double and French doors fail most often where the two leaves meet. If the astragal is worn or the active leaf sags, you will feel the draft before you see the gap. We install double doors with reinforced astragals, aligned multi-point hardware, and thresholds that shed water away from the interior floor. This matters in Miami, where afternoon thunderstorms can drive rain horizontally against west-facing door walls. We also check the header for deflection before hanging a wide double unit, because a sagging header will defeat even the best door hardware within a season.
Bifold & Folding Doors
Bifold and folding doors open an entire wall, which makes them popular for Miami patios, pool decks, and interior room dividers. They also carry more weight per linear foot than any other door type, so the track, rollers, and header connection must be exact. We install folding door systems with the track leveled to within a sixteenth of an inch and the panels adjusted so they stack evenly against the jamb. If a bifold door has been botched once, the symptoms are hard to miss: panels that scrape the floor, a track that pulls away from the header, or a gap that grows wider every time the door cycles. We correct the opening first, then hang the panels.
Pivot Doors
A pivot door carries its weight on a hinge at the top and bottom rather than along the side jamb, which allows for wider, heavier slabs and a cleaner look. But pivot hardware is unforgiving. If the floor pivot is off center by as little as an eighth of an inch, the door will bind or lean. We install pivot doors with the floor plate set in a level, reinforced substrate and the top pivot aligned on a plumb axis. This is a door type where measuring twice is not a slogan. It is the difference between a door that floats open with one finger and one that fights you for years. In Miami, we frequently see pivot doors on modern spec homes in Edgewater and Brickell, and we service the hardware those doors came with as well as installing new units.
Storm Doors
A storm door is a second layer of protection and ventilation, but it only works if the outer frame is installed square and the closer is adjusted for the wind load. Miami storm doors take a beating from salt air and afternoon gusts, so we use stainless steel hardware where possible and set the closers to prevent slamming. We install storm doors that let you capture the winter breeze without letting in rain, and we make sure the latch aligns with the strike plate so the door actually locks. A storm door that never quite clicked shut was probably hung without checking the reveal, and that is the first thing we correct.
Arched & Custom Doors
Arched and custom doors are the hardest to get right because there is no forgiveness in the geometry. If the arch is not routed to match the opening radius, the reveal will be tight at the crown and wide at the shoulders. We install arched doors with custom jamb extensions, site-measured templates, and hardware positioned for the door’s actual swing weight. Custom work is where TruePane earns its keep. Dale Kessler built this company on the belief that out-of-true installs and voided warranties were problems worth fixing permanently, and that starts with refusing to force a door into an opening it does not fit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Door Installation
We are an authorized installer for more than a dozen manufacturer lines, and we work regularly with PGT, CGI, and CWS doors in Miami. PGT is the most common brand we see on homes built after 2010, and we know their hinge templates and sill details well enough to quote them accurately the first time. CGI makes heavy-impact doors popular in flood zones and coastal neighborhoods like Coconut Grove and Key Biscayne, and we register their warranty paperwork the day we hang the door.
We also install and service CWS doors, which show up often on custom homes in Pinecrest and Coral Gables. Each of these manufacturers has different requirements for documentation, flashing, and hardware, and we follow them to the letter because a warranty is only good if it is registered correctly. Whether you have a PGT, CGI, CWS, or any other make, we can give you a straight answer on what the door needs and what it costs.
Signs You Need Door Installation Right Now
- The door binds or sticks in summer. Wood and composite frames swell in Miami humidity. If your door only sticks from June through September, the opening was likely too tight from the start, or the hinges have sagged. A door that binds is a door that is wearing out its hardware and its frame every time you force it.
- You can see daylight around the edges. If light passes through at the latch side, the top, or the bottom, so does air, water, and noise. In Miami, that means higher cooling bills and a wet floor during a sideways storm. A properly installed door has a consistent reveal on all three sides and a threshold that seals across the full width.
- The door has been kicked in or forced. Even a successful repair after a break-in often leaves the jamb and strike plate compromised. If the screws are spinning in enlarged holes or the jamb is split behind the strike, the next forced entry will be easier, not harder. We replace the damaged framing and install reinforced strike plates anchored into the stud.
- The threshold is rotted or corroded. In Miami, salt air and standing water eat thresholds faster than anywhere else in the state. A soft threshold lets water wick into the subfloor, and by the time you see the stain on the interior floor, the damage is already spreading. We replace thresholds with rot-resistant materials and seal the underlayment before setting the new door.
- The door no longer locks securely. If you have to lift the handle or shoulder the door to get the deadbolt to throw, the door and frame are out of alignment. A door that does not lock is not a door. It is an invitation. We realign or replace the door so the bolt slides into the strike without effort, every time.
Our Door Installation Process - Step by Step
- 1
Measure and inspect. We measure the rough opening at the top, middle, and bottom, and we check the header, the subfloor, and the existing jamb for rot or deflection. We use a laser level to confirm the opening is plumb and square, and we write down everything we find. You will see those measurements on the quote.
- 2
Side-by-side quote. We bring manufacturer literature and prices to the table. You see what you are buying: door slab, frame, hardware, finishing, and labor, all line-itemed. No surprise line items on the bill. A square deal means you know the price before the job starts.
- 3
Prep the opening. We remove the old door carefully, and we do not hide what we find underneath. If the subfloor is soft or the jamb is rotted, we stop and tell you. We replace framing with pressure-treated lumber where code requires it, and we flash the opening to Miami-Dade building standards.
- 4
Install and adjust. We hang the door, set the reveal, and adjust the hinges, strike plate, and threshold until the door opens and closes with proper resistance. We check the weatherstripping with a dollar-bill test at every contact point. If the dollar slides free anywhere, we adjust until it does not.
- 5
Register warranties and walk through. Before we leave, we register both manufacturer warranty layers in writing and hand you a copy with the durations stated. We walk the door with you, show you how the hardware works, and answer any questions. If something is not right within 90 days, we come back and make it right. No paperwork fights, no arguing.
How Much Does Door Installation Cost in Miami?
Affordable Door Installation in Miami, FL starts at $850 for a standard single entry door, running up to $4,200 installed depending on the material, hardware, and condition of the opening. Double French doors typically run $2,500 to $7,500 installed, and a high-quality impact-rated door from PGT or CGI can run $3,000 to $12,000 or more depending on size and glass package. Pivot doors and custom arched doors are the most variable, generally starting around $5,000 and rising with the slab, hardware, and engineering.
What affects the price most is the condition of the rough opening. If the header has sagged, the subfloor is rotted, or the jamb is split, the framing repairs cost more than the door itself in some cases. That is why we measure everything before quoting. A free estimate from TruePane includes the door, the hardware, the flashing, the finishing, and any framing repairs we can see. If we find hidden damage once the old door is out, we stop and give you a written change in the price before we proceed. You will never get a bill with items you did not approve. Call (754) 238-2201 to schedule your free estimate.
Door Installation Near Miami - Our Service Area
TruePane installs doors throughout the Miami metro area, including Aventura, Kendall, Coral Gables, Pinecrest, Brickell, Edgewater, Little Havana, and the surrounding neighborhoods. We also serve clients from our wider Florida service network, including homeowners near home base and in nearby communities. If you have been looking for Door Installation in Anna Maria, you will find the same TruePane standard there, and we are proud to extend it to Door Installation in Acacia Villas and Door Installation in Alafaya as well. A live person answers our phone 24/7, and we schedule every estimate at a specific time. We will be there when we say.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well, including Door Installation in Miami Beach. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Door Installation in Miami
Door installation is the process of setting a new door slab and frame into a prepared opening so that it seals, operates, and locks correctly. Our work in Miami includes measuring the opening, repairing or replacing the framing, hanging the door, adjusting hardware, and registering warranties. Done right, it is a door that works the same in every season and every storm.
Most single door installations in Miami are completed in one visit, usually the same day we arrive. Double doors, folding doors, and custom units can take two to three days if the opening needs structural repair or the finishing work is extensive. We give you a clear timeline in writing before the job starts.
A standard entry door in Miami typically costs $850 to $4,200 installed, while impact doors and custom units run considerably higher. The biggest variable is the condition of the rough opening, which is why we inspect and measure before quoting. Call (754) 238-2201 for an exact quote, and the estimate is free.
Yes. We are an authorized installer for PGT, CGI, and CWS, among more than a dozen manufacturer lines. We know their hardware, hinge templates, and warranty requirements, and we register every warranty in writing before we leave the driveway.
We keep a live person on the phone 24 hours a day, 7 days a week, so if a door is broken or compromised, a real person will answer and help you figure out the next step. Fast, scheduled installation is not always possible on custom doors, but we will tell you honestly when we can get there. Call (754) 238-2201 and we will give you a straight answer.
Every TruePane installation is covered by the Done Right Promise and The Keystone Standard. That means both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves your driveway. If the work is not done right within 90 days, we make it right with no paperwork fights and no arguing.
Clear the area around the door, inside and out, so our technicians have room to work and a clear path to the truck. Move any furniture, rugs, or wall hangings near the door, and secure pets in another room. We protect the work area with drop cloths and clean up thoroughly before we leave.
Schedule Your Door Installation Service in Miami Today
Call (754) 238-2201 to schedule your Best Door Installation in Miami, FL estimate. A live person answers 24 hours a day, 7 days a week. You will get a written, line-item quote, a specific appointment time, and a door that works. Done right, plainly, and backed by The Keystone Standard. We stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.