Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Meadow Woods
Custom window and door replacement in Meadow Woods typically runs $900-$2,800 per opening for standard retrofit work, and $2,500-$7,500 for fully custom shapes, oversized panels, or impact-rated lanai slider conversions. Most jobs in this community require a permit and an Orange County wind-load inspection, because nearly every home here was built under pre-2004 code and the original aluminum frames no longer pass current standards. We know that before we even knock. Call (754) 238-2201 and we’ll walk you through what your specific house needs, no guesswork.
Meadow Woods is not Lake Nona. It’s not Conway or Belle Isle either. The housing stock here went up fast between the late 1980s and mid-2000s, almost all of it CBS construction with aluminum single-hungs and sliding glass doors to screened lanais. Those windows are now 20 to 35 years old. Their seals are failing, their frames are corroding, and their flashing was never built for the humidity we get inland in Orange County. When we open a wall in Meadow Woods, we know what we’re going to find before the stucco comes off. That’s the difference between a company that works here and a company that just bid here.
Our crews serve Meadow Woods directly. Scheduling is coordinated from our South Florida office, but the technicians who show up at your door live in this region and work these subdivisions week after week. We’re an employer that trains apprentices into journeymen because we plan to be here in thirty years. If you need Custom Windows & Doors done right, we’re the crew for the job.
Why TruePane Windows & Doors Is Meadow Woods’s Preferred Custom Windows & Doors Company
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard at the shop: if the pane is not true, the job is not done. That rule names the company and governs every install we run in Meadow Woods. Our reputation in this community is built on showing up when we say, measuring every opening twice, and writing down both manufacturer warranty layers before the truck leaves the driveway. That’s The Keystone Standard. No paperwork fights. No arguing. If it’s not done right in 90 days, we make it right.
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. When a Meadow Woods homeowner asks us to quote a job, we put the options side by side on paper so they see exactly what they’re buying. Background-checked, uniformed technicians do the work. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. You call, someone answers.
We also know what local inspectors look for in this community. The wind-load failures we see most often in Meadow Woods are lanai sliders with corroded tracks and failed corner welds. The energy failures are fogged double-panes on original 1990s aluminum single-hungs. When we quote a job, we quote it for what the inspector will actually require, not what the homeowner hopes will pass. That’s a square deal, written down.
Our Custom Windows & Doors Services in Meadow Woods
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are a common upgrade in Meadow Woods when homeowners replace their original aluminum windows. The original single-hungs in these 1990s subdivisions almost never had grilles, so adding them changes the elevation of the home without changing the framing. We build SDLs to match the window grid pattern on the rest of the house, including the front elevation glass and any transoms. For homes near neighborhood entrances like Sawgrass Pointe Drive or the communities off Wetherbee Road, we match the HOA’s architectural requirements before we order the glass.

Custom Shape Windows
Arches, radius tops, octagons, half-round transoms. Meadow Woods homes from the early 2000s often have a few custom shapes mixed in with standard rectangles, and those shapes are the first to fail because manufacturers sealed them less robustly. When we replace a custom shape, we template the rough opening ourselves, order the glazing to match the existing curve within an eighth of an inch, and set it with the same flashing upgrade any new code-compliant opening requires. A custom arch window in Meadow Woods typically runs $1,400-$4,200 installed, depending on the radius and glass package.

Oversized Glass Panels
Fixed picture windows and oversized panels are common on the rear elevations of Meadow Woods homes facing screened lanais and retention ponds. Those panels take a lot of heat and UV, and the original glazing was never low-E by today’s standards. When we pull an oversized panel, we check the header above it before we order anything. In a number of Meadow Woods homes we’ve worked on, the original header was undersized for the span, which means the rough opening has been slowly sagging for twenty years. We correct the framing first, then set the glass. An oversized low-E picture window replacement in the $1,800-$5,500 range is typical here.

Commercial Storefront Glazing and Curtain Wall Systems
Meadow Woods has a smaller commercial footprint than some nearby Orange County communities, but storefront work still comes up, mostly along Orange Avenue corridor buildings and small retail plazas. We handle commercial storefront glazing replacement and curtain wall repair for those properties, including storefront doors, sidelites, and aluminum framing. For curtain wall work, we coordinate with the building owner on access and staging, and we pull the required permits. If the pane is not true, the job is not done, and that applies to a strip mall storefront as much as it does to a family room picture window.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Meadow Woods
We install and service manufacturer lines including Andersen, Pella, Marvin, PGT, and CGI, plus impact-rated options from ES Windows and ECO Window Systems. For Meadow Woods homeowners, that matters because different subdivisions have different HOA requirements and different wind-load exposure zones. A home off Wetherbee Road may need a different rating than one off Landstar Boulevard, and we know which manufacturers meet which rating without overcharging. We keep a stock of common hardware, rollers, and weatherstripping for the aluminum sliders and single-hungs we see most often in this area, which means we can turn around a repair faster than a company ordering parts from out of state.
Common Custom Windows & Doors Problems We See in Meadow Woods Homes
- Fogged original double-panes on 1990s aluminum single-hungs. Argon fill leaks out after 15-20 years in Meadow Woods’s 75% average relative humidity, and the glass fogs between panes. This isn’t a cleaning issue; the seal has failed and the unit needs replacement.
- Corroded lanai slider tracks and failed corner welds. The extruded aluminum frames on the original sliders to screened lanais corrode in this humidity. Sashes jump the track, corners crack, and a wind-load inspector rejects the opening.
- Failed flashing behind stucco. Homes built before the 2004 Florida Building Code were flashed with asphalt-saturated felt that dries out and crumbles behind the stucco. Any custom window replacement we start often uncovers hidden water damage at the jamb, which means a flashing tape upgrade before the new unit goes in.
- Undersized headers over oversized glass panels. In some early-2000s Meadow Woods homes, large rear picture windows and transoms were framed without a structural header sized for the span. The opening sags. The glass binds. We correct the framing before we set the new panel.
Pricing for Custom Windows & Doors in Meadow Woods, FL
Let’s be direct about what this costs. Standard retrofit window replacement in Meadow Woods runs $900-$1,800 per opening for a standard-size vinyl or aluminum double-hung. Custom shapes run $1,400-$4,200. Oversized panels run $1,800-$5,500. A code-compliant lanai slider replacement with impact-rated glazing runs $2,800-$7,500 installed, depending on the opening width and the manufacturer. Architectural grilles and SDLs add $150-$600 per sash, depending on the pattern.
What changes the price most in Meadow Woods is what we find when the wall is opened. If the rough opening is square and the flashing is intact, the job is straightforward. If the flashing has dry-rotted, the header is undersized, or the jamb shows water damage, the allowance work gets added and priced in writing before we touch the permit. We don’t surprise you on the bill. We write the allowances into the contract so you know the range before we start. Call (754) 238-2201 for a free estimate, and we’ll put the numbers on paper.
We Also Serve Cities Near Meadow Woods
Meadow Woods is our focus for this page, but our crews also cover nearby Orange County communities including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re in one of those areas and dealing with the same 1990s aluminum window stock, the same flashing failures, and the same code inspections, the same team serves you too. Call (754) 238-2201 and we’ll schedule it.
Serving Meadow Woods, FL - Our Local Coverage Area
We’re based in the Meadow Woods area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Meadow Woods
Because the original window openings in Meadow Woods’s 1990s and early-2000s subdivisions were framed to whatever the builder had on hand, not to a uniform standard. We routinely measure openings that are a half-inch off from what any big-box store stocks, and the custom shapes like arches, radius tops, and transoms have no standard replacement at all. So the job becomes a custom cut or a full custom window, ordered to the exact opening. That’s normal here. We template every opening twice before ordering. Call (754) 238-2201 for an exact quote on your openings.
Replacing any window in Meadow Woods triggers compliance with current Orange County Florida Building Code energy and wind-load requirements. That means the new unit must meet current SHGC limits, which in this climate zone means low-E glazing, and it must be rated to the county’s design wind speed. If the original flashing has failed, the permit also requires a flashing tape upgrade at the jamb. We write those allowances into the contract before pulling the permit, so you never see a surprise line item. Call (754) 238-2201 and we’ll walk you through what your specific house will require.
Because the original extruded-aluminum lanai sliders in this community fail at roughly double the rate of any other component in the home. The tracks corrode, the corner welds crack, and the weatherstripping turns brittle in the humidity. When that happens, the opening won’t pass Orange County’s wind-load inspection. A homeowner who budgeted for three new windows often discovers the lanai slider needs to be replaced too, and that’s a $2,800-$7,500 line item, not a $200 roller repair. We flag it on the estimate so it’s not a surprise. That’s what a square deal looks like. Call (754) 238-2201 for a free estimate on your lanai door.
You’ll see fogging between the panes that doesn’t wipe off, or a haze that looks like smoke trapped inside the glass. That’s the tell. In Meadow Woods’s humidity, original 2002 argon-filled double-panes start failing in the 15-20 year range, so a house built in 2002 is right at the end of the curve now. If you’re seeing condensation between the panes on cool mornings, the seal is gone. We can confirm it during a free estimate. Call (754) 238-2201 and we’ll tell you straight.
Not always. Orange County’s wind-load requirements apply to all replacement windows, but the impact-rating requirement depends on the specific exposure zone of your home and whether you’re in a wind-borne debris region. Some Meadow Woods homes require impact-rated glazing on certain elevations; others don’t. We’ll tell you what your home’s elevation requires, and we’ll show you the price difference between a code-compliant non-impact unit and a full impact-rated one. Either way, we register both warranty layers in writing before the truck leaves. Call (754) 238-2201 to schedule a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Meadow Woods since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After