ES Windows Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ES Windows Custom & Geometric Windows in Miami: What to Know First

We service, repair, and replace ES Windows custom and geometric units throughout Miami, from arched transoms over entry doors to radius picture windows and oversized impact openings. Most custom and geometric ES Windows jobs run one to three weeks from template to finished install, depending on glass lead time and whether we are matching an existing finish. Our pricing is straightforward: we quote the job in writing before work begins, and that number does not move unless you change the scope.

Call (754) 238-2201

This page is for Miami homeowners who already own ES Windows and are dealing with a failed seal, a cracked curved lite, or a custom opening that needs a new unit built to spec. If that sounds like your situation, call (754) 238-2201 and ask for a free estimate. We will tell you over the phone whether it sounds like a repair or a replacement before anyone schedules a visit.

Key Takeaways

• We are an independent ES Windows service provider in Miami, not a manufacturer-authorized dealer.
• Custom and geometric ES Windows units require templating, not just measuring; we template every curved or angled opening ourselves.
• Both warranty layers get registered in writing on every job we do, per our Keystone Standard.
• Most custom ES Windows work in Miami is completed in one to three weeks, not one to three months.

How ES Windows Products Fail, and How We Fix Them

ES Windows builds a solid aluminum frame, and in Miami’s salt air that frame holds up better than most. But their custom and geometric lines have specific failure patterns we see repeatedly in the field. Here are the five most common, and what we do about each:

• Curved lite seal separation on radius units. On shaped ES Windows units, the bent glass is the weak point. The insulated glass seal along the curve fails first, usually within eight to twelve years in Miami humidity. You will see fogging that never clears, worse in the morning. We replace the curved IGU with a new templated unit, and we specify a secondary seal rated for high-humidity coastal exposure, which is a step up from what the factory originally used on older builds.
• Arch-top operating sashes that bind at the apex. ES Windows makes a handsome arched casement and awning, but the hinge hardware at the top of the arc wears unevenly under Miami’s daily thermal cycling. The sash starts to drag, then sticks. We re-square the sash, replace the factory hinge with a heavy-gauge stainless aftermarket hinge where appropriate, and rebalance the unit. If we can source the OEM hinge within a reasonable window we will quote both options side by side and let you choose.
• Weep system clogs on oversized fixed geometric units. Big trapezoid and triangle fixed windows from ES Windows rely on small weep holes at the sill to drain condensation and wind-driven rain. In Miami, those weeps clog with pollen, salt crust, and construction dust within a few seasons, and water backs up into the track. We drill out the weeps, flush the sill channels, and where the original drain path is undersized, we will not enlarge it until we confirm with you that it will not void the remaining frame warranty.
• Frame corner gaskets shrinking on custom multi-angle bays. ES Windows bay and garden window assemblies use corner gaskets between mulled sections. Miami’s UV load is brutal on rubber, and those gaskets shrink and crack after roughly a decade, opening small air leaks at every joint. We strip the old gaskets, clean the mullion faces, and install a UV-stable replacement gasket cut to the exact profile. On older units where the profile is discontinued, we source an aftermarket match rather than telling you the only option is a full replacement.
• Impact laminated glass delamination on shaded arcs. On ES Windows impact-rated curved units that sit under deep overhangs or porch roofs, the laminated interlayer can begin to delaminate at the edges because the glass never gets hot enough to fully cure the laminate bond the way a sun-exposed unit does. You will see a milky edge spreading inward from the frame. This is a replacement, not a repair, and it is one we template and order carefully because the curve has to match within an eighth of an inch or the unit will never seat properly in the existing frame.

Our ES Windows Custom & Geometric Windows Process

We have been doing this long enough to know that the job is won or lost at the template stage, not the install. Here is how a typical ES Windows custom or geometric job runs with us:

1. 1
   Call and talk to a person. You call (754) 238-2201, and a live person answers. We ask what the unit looks like, what it is doing, and roughly when it was installed. If it sounds like something we can fix, we schedule a visit.
2. 2
   On-site diagnostic and template. A background-checked technician comes out, inspects the frame, the glass, the hardware, and the opening. For any curved or angled unit, we build a physical template of the exact opening. A tape measure is not enough on a radius unit, and we will not pretend otherwise.
3. 3
   Written quote with options. We quote the repair and the replacement when both are viable, side by side, on paper. If an aftermarket part will outlast the OEM part, we say so. If the OEM part is the only thing we would trust, we say that too. No surprise line items.
4. 4
   Parts and fabrication. We order the glass or hardware, and our shop fabricates the custom unit to the template. We register both manufacturer warranty layers in writing before the truck leaves the driveway, including the dates and coverage terms.
5. 5
   Install and test. The new unit goes in, we set it square and true, we run water testing on the exterior where the opening allows, and we cycle the sash until it moves cleanly. If the pane is not true, the job is not done.
6. 6
   Cleanup and warranty paperwork. We sweep, vacuum, and haul the old glass. You get copies of every warranty registration and our Done Right Promise in writing before we leave.

What ES Windows Custom & Geometric Windows Costs in Miami

Here is straight pricing based on what we have billed across Miami-Dade over the last several years. These are ranges, not quotes, because every opening is different:

• Curved IGU replacement (fogged seal) on an arched or radius fixed unit: $800 - $1,900 depending on curve radius and glass spec.
• Full custom geometric window replacement (triangle, trapezoid, oversized fixed): $1,500 - $4,500 installed, with impact glass pushing the high end.
• Arched or radius casement/awning rebuild (hardware, rebalance, glass as needed): $700 - $2,200.
• Custom bay or garden window reglazing and gasket work: $500 - $1,800 depending on the number of lites and mullion condition.

What moves the number most is glass type, curve complexity, and whether the frame is worth saving. We will tell you honestly which it is. Call (754) 238-2201 for a free estimate with exact numbers.

Why Miami Homeowners Call TruePane Windows & Doors for ES Windows Work

Because when a curved impact window fails in August, you want a company that answers the phone and has seen that exact failure before. We have been serving Miami-area homes since 2008, and Dale Kessler grew up in Kendall when it was mostly nurseries and canal roads; he has been measuring, sourcing, and setting windows in South Florida for going on three decades. We are not a franchise, and we do not send someone out who has never templated a radius opening.

Our Done Right Promise is in writing on every job, and our Keystone Standard means both manufacturer warranty layers are registered in writing before we leave. If the work is not right, we make it right. No paperwork fights. We also install and service PGT, CGI, CWS, and ECO Window Systems, so if your Miami home has a mix of brands and one of them is an ES Windows unit, you are not calling three different companies.

FAQs