Entry Doors

Entry Doors in Miami, FL | TruePane Windows & Doors

An entry door in Miami does two jobs at once. It’s the first thing guests touch and the last line of defense between your living room and a Category 3 wind gust off Biscayne Bay. TruePane Windows & Doors installs Therma-Tru fiberglass and steel entry door systems that carry the impact ratings Florida building departments actually ask for, without making your front elevation look like a bank vault. We’ve installed entry doors from Homestead to Aventura, and we know what Miami-Dade plan reviewers want to see on a permit set. If you’re replacing a builder-grade door or spec’ing one for new construction, call us at (754) 238-2201 and we’ll walk you through the options that fit your opening and your wind zone.

Call (754) 238-2201

Product Overview - Entry Doors

Most Miami homes are built around one of three architectural languages: 1920s Coral Gables Mediterranean, mid-century Miami Modern, or the clean-line concrete boxes going up in Edgewater and Brickell. Therma-Tru fiberglass and steel entry door systems fit all three because they’re available as factory-finished smooth panels or paint-grade woodgrain that takes color the way real wood does, minus the swelling and rot that humidity brings. These aren’t decorative doors with impact glass added as an afterthought. The frame, the slab, the hardware prep, and the glazing are engineered together so the entire assembly carries the load as one system.

Fiberglass slabs resist the salt air off the Atlantic without warping, and steel slabs give you the thinnest sightlines for maximum glass area when you want more natural light at the foyer. Both are built to take an impact rating without giving up curb appeal. TruePane Windows & Doors installs this product across our Therma-Tru lines, which means you get the same door system spec’d for HVHZ construction with our own installation protocols layered on top: level, plumb, square, and sealed at the perimeter so water never finds a path behind the jamb.

Technical Specifications

• Frame materials: Fiberglass, Steel. Fiberglass for coastal corrosion resistance and thermal stability; steel for maximum rigidity and narrow stile profiles.
• Maximum size: Up to 48″ wide, single panel. Double-door configurations available where required, typically as paired 36″ or 30″ slabs.
• Glass options: Decorative Impact Glass Insert, Low-E Insulated Glass Insert, or No Glass (Solid Panel) for full privacy and the highest possible structural margin.
• Color / finish options: White, Black, Bronze, and a Paintable Woodgrain Finish that accepts site-applied color to match your trim package.
• Design pressure: Matched to your wind zone, up to +/-100. We never over-spec a door beyond what your site requires.

Every configuration is run through TruePane Windows & Doors’s pre-install verification so the door that arrives in Miami is the door the permit set describes. No substitutions, no surprise downgrades.

Hurricane & Compliance Performance

Laminated Impact Glass - When your entry door carries glass, that glass is laminated with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack, but the interlayer holds the fragments in the frame, keeping the building envelope sealed and keeping wind-driven debris outside where it belongs.

Miami-Dade NOA / FL Product Approval - Therma-Tru configurations carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers, issued per configuration. We verify the exact approval against your specific quote before we ever schedule the install, so your permit package references a configuration that actually exists.

FBC / HVHZ Compliance - These entry doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements, which govern Miami-Dade and Broward counties. That means the door system, not just the glass, is tested as a complete assembly against the code’s wind-load provisions.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These three tests together measure what happens when a door takes a hit, gets hammered by pressure cycling, and then gets leaned on by someone trying to get in after the storm.

Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, never higher. There’s no benefit to paying for a +100 door on a site that only sees +60. We size the spec to your address, your exposure category, and your mean roof height, exactly what a Miami plan reviewer expects to see.

Energy Performance - Low-E and insulated glass inserts are available for the glazed configurations, which matters when your entry faces west into the afternoon sun or your foyer is unconditioned space. The Low-E coating and insulating air space reduce heat transfer through the glass without touching the impact rating.

Color & Glass Options

White and Black are the two finishes we order most in Miami, and for good reason. White reads crisp against pastel stucco in Coconut Grove and works with the trim on older Spanish-style homes in Shenandoah. Black gives you a sharp, contemporary edge on the white-and-glass boxes popping up in the Upper Eastside and MIMO district. Bronze lands somewhere between, and it’s the finish we recommend when you want warmth without committing to a paint schedule.

The Paintable Woodgrain Finish exists for one specific homeowner: the one who wants a custom front door color that matches their shutters or their porch ceiling. It’s factory-primed and ready for site paint, and the woodgrain texture gives the color depth that a smooth slab won’t. On the glass side, Decorative Impact Glass Inserts bring privacy and character without giving up the PVB interlayer. Low-E Insulated Glass Inserts are the choice when the entry gets direct sun and you want the glass to work thermally. And if you’d rather not have glass at all, the Solid Panel configuration maximizes structural margin and gives you the most straightforward maintenance profile on the market.

Installation by TruePane Windows & Doors in Miami

An NOA-rated entry door installed wrong is just an expensive door with a compliance number on it. The rating only holds if the frame is anchored correctly, the reveal is consistent, and the perimeter seal is continuous. That’s why TruePane Windows & Doors installs every entry door in Miami to the same discipline: pre-install inspection of the rough opening, condition of the subsill, and the existing waterproofing detail before anything comes off the truck.

We set the frame level, plumb, and square. We shim at the hinge and lock points, not wherever is convenient. We perimeter-seal with AAMA 812 low-expansion foam and follow AAMA 2400/2410 installation practice so the air and water barrier stays continuous from wall system to door frame. Then we run a water test on the sill and threshold before cleanup, because Miami rain doesn’t wait for the caulk to cure. Coastal exposure in neighborhoods like Key Biscayne and Pinecrest means stainless hardware where the salt spray hits, and we spec it accordingly. If your municipality is an HVHZ jurisdiction and your permit requires product approval submittal, we know what the building department wants to see and we’ll help you get it there. Improper installation compromises the NOA-rated system. That sentence is true for every hurricane door in Florida, and it’s the reason we don’t subcontract this work out.

Frequently Asked Questions - Entry Doors

What wind zone or design pressure is the Entry Door rated for? The design pressure is matched to your wind zone, up to +/-100, never higher. We calculate the required rating from your address, exposure category, and mean roof height and spec the door to that number. Call (754) 238-2201 and we’ll pull the exact design pressure for your site.

What is the lead time on an Entry Door? Most Therma-Tru configurations ship to our Miami shop within a few weeks of order confirmation, depending on the glass package and finish you choose. Custom paint-grade finishes and decorative glass can add time. TruePane Windows & Doors confirms the schedule when you approve the quote so there are no surprises at the rough opening.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal? Yes, for most Miami-Dade and Broward municipalities. Your entry door configuration must reference the exact NOA or FL Product Approval number that matches the size, glass, and design pressure you’re installing. We verify that number on your quote before it’s submitted, so the permit package and the physical door are the same product.

Can I customize the size or configuration? Up to 48″ wide for a single panel, with the glass and finish options listed on this page. If your rough opening is larger, double-door configurations are available in paired slabs. TruePane Windows & Doors will measure the opening, check the framing, and tell you what fits before you order anything. Bring your opening dimensions to the call and we’ll take it from there.

How do I maintain the frame? Fiberglass and steel slabs need almost nothing beyond washing with mild soap and water, especially near the coast where salt builds up on the sill and threshold. Check the weatherstripping and the sweep once a year, and keep the hinge hardware clean and lubricated. Touch up any paint on a paint-grade finish before the substrate shows, and the door will outlast most of the houses it’s installed in.

Get a Quote - Entry Doors in Miami

Whether you’re replacing one front door in Shenandoah or spec’ing entry packages for a new build in Coral Gables, TruePane Windows & Doors will quote it precisely, with the approval numbers and design pressure on paper. Call (754) 238-2201 to schedule a free on-site measurement. We measure, we spec, we install, and we stand behind it.

Written by the team at TruePane Windows & Doors, serving Miami, FL with hurricane-impact window and door installations.