Custom Windows & Doors in Orlando - Free In-Home Measure, Written Price

Fast, Reliable Custom Windows & Doors Across Orlando

Custom window and door work in Orlando is not a one-size-fits-all job, and if your home was built between the late 1970s and early 2000s, it almost certainly sits on concrete block. That means the frame cannot be set the way it would be in a wood-stud house up north. It gets anchored into masonry with tapcon screws, and Orange County requires a posted permit plus a valid Florida Product Approval number before the inspector will even look at it. Our crews work inside that code every week. For a free written line-item estimate in Orlando, call (754) 238-2201.

Call (754) 238-2201

Why TruePane Windows & Doors Is Orlando’s Preferred Custom Windows & Doors Company

We have pulled enough stop-work orders off other people’s jobs in Orlando to know exactly what goes wrong when a contractor does not understand Florida’s product approval database. A company can install a perfectly good window from another state’s code and still fail inspection here because the FL# was never issued. Our Custom Windows & Doors team checks that approval before ordering, every time. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done. That standard governs every custom window and door we set in Orange County.

What our Orlando customers tell us matters most is that we answer the phone. Not a callback form, not a voicemail tree. A live person, 24 hours a day, 7 days a week. That matters to the homeowner in College Park who needs a custom arch window quoted, and to the commercial property manager on Sand Lake Road who has a storefront with a cracked lite. We quote manufacturer lines side by side on paper. We register both warranty layers in writing before the truck leaves the driveway. And we stand behind every install with the Done Right Promise: if it is not done right, we make it right, with no paperwork fight.

Our Custom Windows & Doors Services in Orlando

Custom Shape Windows

Circle-tops, octagons, eyebrows, trapezoids, true arches. Orlando’s housing boom produced a surprising number of these shapes in entryways, gable ends, and master suites, and most of them are now 25 to 45 years old. A custom shape window in a CBS wall still has to be anchored to concrete block and still has to carry a Florida Product Approval. We measure every opening twice and order each unit with the frame material, glass package, and design pressure rating matched to the opening it will fill.

Commercial Storefront Glazing

Storefront systems along Orange Avenue, Edgewater Drive, and the tourist corridors east of Interstate 4 take a beating from afternoon thunderstorms and high humidity. Frames pit, seals fail, and entrance doors begin to sag. We replace storefront framing and glass with systems that meet current Orange County wind-load requirements, and we schedule the work around your business hours so you are not shutting down longer than necessary.

Curtain Wall Systems

Larger commercial buildings in Orlando, particularly mid-rise offices near downtown and along the I-4 corridor, use curtain wall systems that demand precise engineering and careful sequencing. These are not jobs for a crew that learned on residential sliders. Our shop cuts, assembles, and sets curtain wall sections with the same discipline we apply to a custom residential window, and we coordinate with local building officials so inspections happen on schedule.

Architectural Grilles & SDLs

Simulated divided lites and true architectural grilles change the whole look of a home, and they are common in Orlando’s older neighborhoods like Delaney Park and Thornton Park, where homeowners want replacements that keep the original character of the house. We install SDL bars inside insulated glass units or as applied grilles on the interior and exterior, matched to the muntin profiles on the surrounding windows so the new work does not look like an afterthought.

Trusted Brands We Service in Orlando

We are authorized installers for CGI, CWS, and ES Windows, and we carry replacement parts and hardware for those lines in our Orlando shop, which means shorter turnaround when a hinge, a roller, or a balance fails. If you have an existing window or door from one of these manufacturers and it is starting to bind, fog, or leak, we can often repair it rather than replace it. When replacement is the smarter call, we quote the replacement side by side with the repair so you can see the numbers and decide.

Common Custom Windows & Doors Problems We See in Orlando Homes

• Seal failure from storm-driven rain. Orlando gets 54-plus inches of rain a year, most of it delivered as violent summer afternoon thunderstorms. That water, driven hard against west-facing windows, works its way into insulated glass units and leaves them fogged. Once the seal fails, the thermal performance is gone and the glass has to be replaced or the unit rebuilt.
• Aluminum frame pitting and corrosion. Original aluminum frames on CBS homes built from 1978 to 2005 are now showing heavy pitting, especially within a few miles of the coast-facing weather patterns that push humid air inland. Pitted frames hold water against the glass and the wall, and they eventually fail at the corners. In a concrete block home, a failed corner is a leak waiting for the next storm.
• Nailing-fin windows set into block. We see this often enough that it bears naming. A window designed for wood framing gets nailed through fins into concrete block, which holds almost nothing. The frame floats. Wind pressure pushes it inward, water finds the gaps, and the inspector flags it. The proper method is tapcon anchoring through the frame into the block, and it is not optional in Orange County.
• Non-approved replacement glass in original jalousie frames. Some Orlando homes still have the original jalousie windows from the 1960s and 1970s. Homeowners try to have the glass swapped into those old frames, but the frames were never designed to hold an impact-rated unit and they almost never carry a Florida Product Approval. The honest answer is usually replacement, not retrofit.

We recently replaced original single-pane aluminum sliders in a Metrowest CBS home where the insulated glass units had failed and the aluminum frames were pitting from years of storm-driven rain. Our crew pulled a permit, posted the FL# from a Simonton impact-rated double-hung, and anchored each fusion-welded frame with tapcons into block. It passed wind-load inspection the first time. That is the standard we bring to every custom window and door job in Orlando.

Pricing for Custom Windows & Doors in Orlando, FL

We Also Serve Cities Near Orlando

Our crews run jobs throughout Orlando and into the surrounding communities daily. If you are in Winter Park, Maitland, Goldenrod, or Altamonte Springs, the same team handles your custom window and door work with the same Florida Product Approval compliance and the same Done Right Promise. The permitting jurisdictions differ slightly, but the code is the same Florida Building Code, and we pull the permit in every one of them.

FAQs - Custom Windows & Doors in Orlando