Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Plantation Mobile Home Park
Custom window and door replacement in Plantation Mobile Home Park is a different job than it is anywhere else in Broward County. Every unit here is a manufactured home, which means the work has to meet HUD Manufactured Housing Construction and Safety Standards, not the Florida Building Code your neighbors in site-built houses follow. That changes the product list, the permitting, and the installation method. TruePane handles it from the first measurement to the final inspection. If you’re in Plantation Mobile Home Park and the windows are binding, fogged, or still the original jalousies, call (754) 238-2201 for a free estimate and a straight answer about what the job actually requires.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Custom Windows & Doors Company
We learned early that a mobile home in Plantation Mobile Home Park is not a small site-built house. Rough openings are shallower. Wall framing is lighter. The anchoring is different. A crew that treats it like a standard residential job will set a window that fails code review, voids the manufacturer warranty, and binds the first humid summer. Our technicians are trained specifically on HUD-code window and door replacement in manufactured housing, and they’ve been through enough Plantation Mobile Home Park units to know what’s behind the wall before they open it.
Homeowners here tend to stay. They remember the contractor who left them a fogged seal or a door that sticks in July. We hear those stories on estimate visits, and we work against them. Dale Kessler founded TruePane on a rule that still hangs in the shop: if the pane is not true, the job is not done. That applies to a custom arched window in a double-wide as much as it does to a storefront in a commercial plaza. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. That’s the Keystone Standard, and it’s not marketing language. It’s a checklist.
Our Custom Windows & Doors Services in Plantation Mobile Home Park
As a Custom Windows & Doors specialist, TruePane installs and services the full scope of residential glazing for manufactured homes and the commercial work that surrounds the park. Here’s how each service applies in Plantation Mobile Home Park.
Custom Shape Windows
Mobile homes from the 1970s and 1980s often have openings that were never standard sizes, or have settled into shapes that no off-the-shelf window will match. We cut and order true custom-shape units, radius tops, octagons, angled trapezoids, and fit them to HUD Wind Zone II requirements for this region. In Plantation Mobile Home Park we regularly order custom-sized single-hung and picture windows because the original rough openings, measured to the eighth of an inch, don’t match anything a lumberyard stocks. If a previous contractor told you the opening is “close enough,” that’s the first sign the window was never going to seal or square.
Commercial Storefront Glazing
The commercial properties on the perimeter of Plantation Mobile Home Park, and the storefronts along SR 7 and Broward Boulevard a few minutes east, get the same heat, humidity, and storm exposure as the homes. We replace failed insulated glass units, upgrade aluminum storefront frames, and install impact-rated glazing for code compliance. Storefront work in this area typically runs $900-$2,400 per opening depending on glass type, size, and whether the frame itself is salvageable. We quote the full scope on paper before any glass is ordered.
Curtain Wall Systems
A true curtain wall is a commercial system, and we design, source, and install them where the job calls for it. In Plantation Mobile Home Park the more common call is a lighter commercial storefront or a fixed glass wall on a sunroom or porch conversion. But the principle is the same: the glass carries the load, so the anchors and the vertical mullions have to be dead true. We engineer every curtain wall job to the wind-load requirements for this part of South Florida, not to a generic national spec.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a window the look of traditional divided glass without sacrificing the energy performance of a single insulated unit. For a manufactured home in Plantation Mobile Home Park where the original look was functional aluminum and the owner wants something more residential, an SDL grille between the glass is a popular upgrade. We also install true exterior grilles and interior contour grids. The grille profile is matched to the manufacturer’s design, so the finished window looks like it was built that way, because it was.
Oversized Glass Panels
Some Plantation Mobile Home Park units have living rooms or additions with a large fixed picture window that needs replacement. Oversized insulated glass gets heavy. It also flexes if the frame is not reinforced, and on a manufactured home the wall structure around a large opening is narrower than site-built framing. We reinforce the rough opening, set the panel on setting blocks, and verify the reveal is consistent around all four sides. Oversized panel replacements in this market typically run $1,200-$3,800 installed, depending on glass specs and whether the frame needs rebuilding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Plantation Mobile Home Park’s manufactured housing stock we most often quote CGI, PGT, and ES Windows. CGI and PGT both manufacture impact-rated single-hung, horizontal roller, and picture units that meet HUD Wind Zone II requirements without needing a custom fabrication order every time. ES Windows gives us access to European-style tilt-and-turn hardware and higher-end architectural lines for owners who want something beyond the standard replacement. We quote brands side by side on paper, with the actual model numbers and warranty durations written out, so you can see what you’re buying and what each line costs. No verbal estimates, no vague “comparable quality” language.
Common Custom Windows & Doors Problems We See in Plantation Mobile Home Park Homes
- Original jalousie windows that leak air, water, and light. The louvered glass units installed on 1970s and 1980s mobile homes throughout Plantation Mobile Home Park have zero hurricane resistance and fail Wind Zone II inspection the moment a remodel permit is pulled. The louver clips also corrode, the glass rattles, and the shut-line gaps let conditioned air pour out. Replacing these with HUD-compliant single-hung units is the most common urgent job we do in the park.
- Thin aluminum frames that oxidize and seize in coastal humidity. South Florida’s salt-tinged air and year-round humidity eat aluminum window frames, especially the thin-profile extrusions used in older manufactured homes. Sashes bind, balances snap, and eventually the frame itself loses structural integrity. We see it in every section of Plantation Mobile Home Park, not just on the perimeter near the drainage canals.
- Failed insulated glass units in shallow mobile home frames. A fogged window in a site-built house is a straightforward replacement. In a manufactured home, the insulating glass unit has to match a shallower frame depth, and if the contractor installs a unit built for standard residential construction, it protrudes, won’t seat, and fails code review when the permit is inspected. Because the original openings are non-standard, most fogged mobile home windows in Plantation Mobile Home Park need a full-frame replacement rather than an IGU swap.
- Non-compliant replacements installed by previous contractors. We regularly open up walls in Plantation Mobile Home Park and find a window or door that physically fits the opening but doesn’t carry a HUD compliance label. That’s a code violation, a warranty void, and an insurance problem if a storm ever tests it. We pull the permit, install labeled products, and pass inspection. The paperwork is done right because the promise doesn’t count if it’s not in writing.
Pricing for Custom Windows & Doors in Plantation Mobile Home Park, FL
A full custom window replacement in Plantation Mobile Home Park, including the HUD-compliant unit, removal of the old window, rough opening repair, flashing, and trim, typically runs $650-$1,450 per window depending on size, frame material, and impact rating. Jalousie-to-single-hung conversions are on that same range, usually starting around $800 per opening because the aftermarket single-hung units sized for mobile home openings are built in lower volumes than standard residential lines. A custom shape window, like a radius top or angle-cut unit, adds $300-$800 to the base price because the unit is a true custom fabrication. Doors run higher: a HUD-compliant mobile home exterior door replacement ordinarily lands between $1,100 and $2,600 installed, and that climbs if we’re reframing the opening. We also offer a permanent 5% discount for seniors and veterans, and a $50 credit on any repair over $250. Every estimate is free, written, and line-itemed so you see the material, labor, and permit costs separately. Call (754) 238-2201 and we’ll come out, measure, and put the numbers on paper.
We Also Serve Cities Near Plantation Mobile Home Park
Our crews run from Plantation Mobile Home Park out to Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs on a routine schedule, so if you have a property in one of those communities, we can get a technician out and a quote back without waiting on a separate service area. Scheduling is coordinated from our South Florida office, and the same Keystone Standard applies on every job, in every city, on every window and door we set.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Plantation Mobile Home Park
Because manufactured homes are regulated by HUD Manufactured Housing Construction and Safety Standards, not the Florida Building Code, and the windows sold on the retail floor of a big-box store are built to Florida Building Code specs for site-built construction. They do not carry a HUD compliance label, and installing them in a mobile home is a code violation that will fail permit inspection and void the manufacturer’s warranty. The units also don’t fit correctly: mobile home rough openings are shallower, the wall framing is lighter, and the anchoring methods are different. That’s why we order HUD-compliant products from manufacturers like CGI and PGT that build specifically for manufactured housing. Call (754) 238-2201 for an exact quote on the right windows for your home. Estimates are free.
Yes, and it’s the most common conversion we do in Plantation Mobile Home Park. Jalousie windows are replaced with HUD-compliant impact-rated single-hung or horizontal slider units, and the rough opening is rebuilt to receive the new frame. The process includes removing the old jalousie frame and mechanism, correcting any rot or corrosion in the surrounding wall structure, installing pressure-treated lumber where needed, and flashing the opening before setting the new unit. You can also choose double-hung if the opening height allows, though single-hung is more common in mobile home applications. We’ll measure and give you both options on paper. Call (754) 238-2201 to schedule the free estimate.
Then the job expands, and we handle it with written documentation before any additional work is done. The original estimate includes a repair allowance for exactly this situation, because we know from years of work in Plantation Mobile Home Park that most 1970s and 1980s manufactured homes have some hidden water damage around window and door openings. If the damage exceeds the allowance, we stop work, show you the condition in the open wall, and give you a written change order with the exact additional scope and price before we touch it. Nothing gets added to the bill without your signed approval. That’s the square deal, and it’s the only way we work. Call (754) 238-2201 to talk through your project.
Fog between the panes means the insulated glass unit’s seal has failed and the argon or krypton fill has leaked out, leaving trapped moisture inside the sealed unit. On an older mobile home in Plantation Mobile Home Park, the original window is almost certainly a thin-profile aluminum frame with a sealed unit that was built to a shallower depth than standard residential glass. That means you cannot simply swap the IGU; the entire window typically needs replacement with a HUD-compliant unit. The good news is that a replacement will also improve the U-factor, cut air leakage, and give you a window that meets current Wind Zone II requirements. Call (754) 238-2201 and we’ll measure, quote, and get it done right.
Yes, a permit is required for window and door replacement in Plantation Mobile Home Park, and yes, TruePane pulls the permit, schedules the inspection, and handles the paperwork from start to finish. Mobile home window and door work is regulated by HUD code through the local building department, and unpermitted work can create problems when you sell the home or file an insurance claim. We include the permit fee as a line item on every written estimate, and our work passes inspection because we install labeled, HUD-compliant products every time. Call (754) 238-2201 for a free estimate that covers the full scope, permit included.
Contact TruePane Windows & Doors
A live person answers the phone at (754) 238-2201, 24 hours a day, 7 days a week. No voicemail tree, no callback form. If you’re in Plantation Mobile Home Park and you want real numbers for a custom window or door job, call and we’ll set up a free estimate. We’ll measure each opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we order anything. That’s been the standard since Dale Kessler started this company, and it’s the standard on every job we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.