Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across St. Petersburg
St. Petersburg Door Installation and custom window work means working with concrete block, salt air, and wind codes that most national installers never see up close. We handle it every week. When you call TruePane Windows & Doors, a live person answers and we schedule a time to measure, quote, and walk you through what your house actually needs, not what a catalog says. Call (754) 238-2201 and we will be there when we say.
St. Petersburg sits on the tip of the Pinellas Peninsula with Tampa Bay on one side and Boca Ciega Bay and the Gulf on the other. That geography means the whole city lives in salt-laden air, and it changes what custom windows and doors have to withstand. We know this because we work homes in Kenwood, Old Northeast, Historic Uptown, and Shore Acres. The conditions do not change block to block. The framing does not either, and that is where the real work starts.
Why TruePane Windows & Doors Is St. Petersburg’s Preferred Custom Windows & Doors Company
We are not the cheapest bid in St. Petersburg. We are the company homeowners call after a cheaper bid left them with a fogged seal and a door that binds in July. TruePane has served communities since 2008 through a craft tradition that starts with Dale Kessler’s founding rule: if the pane is not true, the job is not done. That rule governs every install from a custom arched window in Old Northeast to a full storefront glazing job on Central Avenue.
Every technician who walks into a St. Petersburg home is background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you are buying. And they register both manufacturer warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard, and it is not a marketing phrase. It is a written record tied to your job.
We also keep a live person on the phone 24 hours a day, seven days a week. No voicemail tree. No regional call center. You call, a person who knows windows answers. When something goes wrong after install, you are not filing a ticket. You are talking to the same company that did the work, and the Done Right Promise means we make it right without paperwork fights. Serving St. Petersburg for years has taught us that this is the only way a window company earns a second call.
Our Custom Windows & Doors Services in St. Petersburg
Our Custom Windows & Doors team handles the specific building conditions St. Petersburg throws at every job. Here is how we approach each service in this city.
Custom Shape Windows
Kenwood and Old Northeast are full of arched, round, and octagonal openings original to 1920s and 1940s homes. A stock window will not fit them, and forcing one leaves you with a compromised seal and an ugly reveal. We measure the actual rough opening, order a true custom shape from CGI or ES Windows, and anchor it into the masonry the way a 1940s CBS wall demands. The result is a window that belongs to the house.
Commercial Storefront Glazing
St. Petersburg’s commercial corridors, Central Avenue especially, run on older storefront systems with corroded aluminum mullions and failed thermal breaks. We replace storefront glazing with systems rated for salt-air exposure and wind loads that apply city-wide, not just on Beach Drive. Business owners on the 600 and 700 blocks of Central know what July humidity does to a storefront that does not seal. We fix it before it fails inspection.
Curtain Wall Systems
Larger commercial and mixed-use buildings in downtown St. Petersburg, including the Edge District and the Innovation District, need curtain wall work that most residential glaziers will not touch. We install and service curtain wall systems with proper drainage, thermal breaks, and impact-rated glazing. The wind loads off Tampa Bay do not forgive shortcuts, and neither do we.
Architectural Grilles & SDLs
Historic Uptown and Old Northeast homeowners often want the divided-light look of original wood windows without the maintenance or the air leakage. Simulated divided lites, or SDLs, give you that pattern with an impact-rated insulated glass unit behind it. We spec the grille profile, the spacer bar, and the glass package to match the house. It reads original from the street and performs like a modern impact window.
Oversized Glass Panels
Homes on Coffee Pot Bayou and Snell Isle often have floor-to-ceiling window walls and oversized sliders with glass panes that exceed what a stock supplier will ship. We handle oversized glass panels up to the structural limits of the opening, and we engineer the anchoring for CBS walls that carry real wind load. The view stays, the frame does the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in St. Petersburg
We are an authorized installer for more than a dozen manufacturer lines, and in St. Petersburg that matters because not every brand holds up to salt air and wind-borne debris code equally. We quote CGI and ES Windows regularly for impact-rated jobs, and offer Andersen repair in St. Petersburg, and CWS or ECO Window Systems where the opening and exposure call for them. We keep local stock access for common replacement parts so a hardware failure in Shore Acres does not mean a three-week wait. You see the line-by-line manufacturer options on paper, side by side, before you decide.
Common Custom Windows & Doors Problems We See in St. Petersburg Homes
- Salt-corroded aluminum frames on 1940s-1960s jalousie windows. The original crank hardware seizes, the frames pit, and the louvers no longer close flush. These windows cannot be weatherstripped into an airtight seal. Every home we service in Kenwood with original jalousies is effectively cooling the outdoors.
- Fogged insulated glass units from salt-laden condensation. Years of humid, salt-heavy air eats the edge seals on dual-pane units. The argon leaks out, condensation gets in, and the glass fogs permanently. We see this in Historic Uptown homes that replaced windows twenty years ago with builder-grade units never meant for this climate.
- Undersized wood buck framing around rough openings. In concrete-block homes, windows are set into wood bucks that shim the opening. On 1940s-1970s originals, those bucks are often undersized, water-damaged, or both. When a permit triggers wind-borne debris upgrades, the inspector will flag the buck. We price that work before we open the wall.
- Failed door hardware on salt-exposed entry systems. Deadbolts, hinges, and thresholds on homes within a mile of the water corrode faster than inland. We replace entry door hardware with marine-grade stainless and set the threshold so it drains properly, because a door that binds in August is a door that was never set right to begin with.
Pricing for Custom Windows & Doors in St. Petersburg, FL
Custom window work in St. Petersburg runs on a wide range because the opening is not the only cost. A custom shape window for a CBS home, impact-rated and ordered from CGI or ES Windows, typically runs $1,400-$3,200 per opening including full-frame replacement and masonry anchoring. A commercial storefront glazing replacement runs $85-$150 per square foot depending on frame condition and impact rating. Oversized glass panels run $1,800-$4,500 per panel based on size and opening framing.
The hidden cost in St. Petersburg is almost always inside the wall: a deteriorated buck, a missing lintel, or undersized framing that fails wind-borne debris inspection. We price that work as a written allowance in the contract, and any change is approved by you in writing before we cut a single anchor. Call (754) 238-2201 for a free estimate with line-item pricing. No surprises on the final bill.
We Also Serve Cities Near St. Petersburg
Our crews serve St. Petersburg and the surrounding Pinellas and Tampa Bay communities. We work regularly in Custom Windows & Doors in St. Petersburg and also take jobs in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you are close by, call and ask. We schedule based on your opening, not a zip code boundary.
Serving St. Petersburg, FL - Our Local Coverage Area
We’re based in the St. Petersburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in St. Petersburg
Jalousie windows cannot be retrofitted to meet Florida’s wind-borne debris code. The louvers themselves are the failure point, there is no weatherstripping system that seals them, and no impact glazing fits the frame. They must be replaced with impact-rated units, and the original rough opening will need the wood buck inspected and likely re-framed. On a Kenwood CBS home, that is a standard conversation with our crew, not an upsell. Call (754) 238-2201 and we will measure the opening and quote the replacement in writing.
The most common hidden cost is the steel lintel and buck replacement. Original 1940s openings often lack a modern code-compliant lintel, and the wood buck that frames the opening is usually undersized or water-rotted after decades of salt-air condensation. Once the permit triggers, the inspector requires both to be brought to current code. On a recent 1950s concrete-block home in Historic Uptown, our crew opened the wall around a rotting jalousie window and found the original framing undersized for a modern impact-rated double-hung. We priced steel lintel replacement and masonry anchoring as a written change order before cutting a single new anchor, then installed impact-rated double-hungs with argon fill. You will know the number before we open the wall. Call (754) 238-2201 for a line-item quote.
Because St. Petersburg sits on the tip of the Pinellas Peninsula, with Tampa Bay to the east and Boca Ciega Bay and the Gulf to the west. Virtually every property in the city is within one to two miles of saltwater on multiple sides. Salt-laden humidity moves across the entire city year-round. That is why we see failed insulated glass seals on homes in Kenwood and Historic Uptown that are nowhere near the beach. The argon leaks out, condensation gets in, and the thermal barrier is gone. Contact us at (754) 238-2201 if your windows are fogging between the panes.
Sometimes, but not always. A casement window has hardware and hinges that require a different rough opening dimension than a jalousie or single-pane slider. If your existing opening has a healthy wood buck and proper lintel, we may be able to fit an impact-rated casement without reframing. If the buck is undersized or rotted, the opening must be rebuilt. We will measure it and tell you straight. Call (754) 238-2201 for a free assessment.
Fogging between panes means the insulated glass unit seal has failed, the argon has leaked out, and moisture is trapped inside. The fix is a glass unit replacement, not a caulk job. We order an exact-size impact-rated or standard IG unit, remove the failed glass, reset the frame if needed, and install the new unit with fresh sealant rated for salt-air exposure. The work is covered by our Done Right Promise. Call (754) 238-2201 for a quote.
Key Takeaways
- St. Petersburg’s salt air and wind-borne debris code change what custom windows and doors must withstand city-wide.
- Original jalousie and single-pane windows on 1940s-1960s CBS homes cannot be sealed or retrofitted to code.
- Hidden framing and lintel costs are priced and approved in writing before any wall work begins.
- TruePane is authorized with CGI, ES Windows, CWS, and other major lines, quoted side by side on paper.
- Call (754) 238-2201 and a live person answers, 24/7.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.