Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Westgate
Custom windows and doors in Westgate usually mean one of two things: a homeowner wants a specific shape or size that stock units cannot fill, or an insurance inspector has flagged the original jalousies and single-pane aluminum sliders and the policy is on the line. Most of our Westgate work starts with the second. We have been replacing louvered jalousies and corroded sliders in this neighborhood long enough to know exactly what Palm Beach County wind-mitigation reports demand, and what it takes to pass on the first inspection. If you are looking at a window that will not seal, a door that binds in July, or a policy renewal letter you do not want to read twice, call us at (754) 238-2201. We will give you a straight answer and a written quote.
Why TruePane Windows & Doors Is Westgate’s Preferred Custom Windows & Doors Company
Our Custom Windows & Doors team works Westgate the way a local shop should: we know the houses, we know the inspectors, and we know what the coastal climate does to the wrong hardware. Homeowners in this neighborhood do not call around for the cheapest bid. They call because they have lived in the same concrete-block house for twenty or thirty years, they plan to stay, and they want the job done right the first time. Dale Kessler founded TruePane in 2008 on a simple rule that still governs every install: if the pane is not true, the job is not done.
Every Westgate job is covered by the Done Right Promise and The Keystone Standard. That means both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves the driveway. No paperwork fights. No arguing. A live person answers every call, 24 hours a day, seven days a week. Not a voicemail tree. Not a regional call center. When you call about a binding slider or a flagged jalousie, you speak to someone who can actually help.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you are buying and what each option costs. And then they set the window square and true, the way it should have been set the first time.
Our Custom Windows & Doors Services in Westgate
Here is what we actually do in Westgate, week in and week out:
Custom Shape Windows
Westgate’s 1950s and 1960s homes were not built with big-box stock dimensions in mind. Arched transoms, radius corners, trapezoids over entryways, narrow sidelights next to front doors: these openings need a window built to the opening, not a standard rectangle forced into a frame. We order custom shape windows in impact-rated configurations so the insurance inspection passes and the look stays right. If a custom arch or angled window needs to be impact-rated, that is a standard specification for us, not a special favor.
Commercial Storefront Glazing
The small storefronts and rental offices along Okeechobee Boulevard and the surrounding Westgate commercial strips see the same salt air and humidity as the houses. We replace fogged and failed storefront glass, rebuild aluminum storefront frames, and upgrade commercial entries to impact-rated glazing when a building owner is facing a wind-mitigation requirement or a failed inspection. For rental property owners in Westgate, a failed storefront pane is rarely a cosmetic issue. It is a liability and often an insurance trigger.
Curtain Wall Systems
Larger multi-unit buildings in Westgate with older curtain wall systems need more than a pane swap. We inspect the mullions, the gaskets, the drainage weeps, and the anchors. Salt air near the coast accelerates corrosion on non-marine-grade aluminum, and we see curtain wall anchors that look fine from ten feet away but are losing structural bite where the fastener meets the block. Our crews specify hot-dip galvanized or stainless anchors and marine-grade finishes so the new system is not rotting from the inside out within a decade.
Architectural Grilles & SDLs
Westgate homeowners replacing original windows often want the new units to look like they belong on the house. Simulated divided lites, or SDLs, give an impact-rated window the look of a traditional divided-light sash without the energy penalty of true divided lites. We specify SDLs on Marvin, Andersen, and PGT lines for Westgate homes where the curb appeal matters as much as the wind rating. For custom shape windows, the grille pattern has to be laid out to follow the geometry of the sash, not just dropped in as a stock grid. We handle that in-house.
Oversized Glass Panels
A few Westgate homes have been opened up over the years with wide patio sliders or fixed picture windows that span eight, ten, even twelve feet. Oversized glass panels in a wind-borne debris region are a serious specification. The glass has to be thick enough, the interlayer compliant, the frame engineered for deflection under wind load. We do not cut corners here. We order oversized impact-rated panels from manufacturers who certify the unit for the specific opening, and we make sure the perimeter seal is done right so wind-driven rain cannot find its way into the wall cavity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Westgate’s coastal exposure, we often specify PGT or CGI impact lines because they carry the Miami-Dade and Palm Beach County wind-load approvals the insurance carriers recognize. When a customer wants the thermal performance of a Marvin or the clean lines of an Andersen, we quote those side by side on paper. We also work with CWS, ECO Window Systems, and ES Windows when the project calls for a specific profile or finish. Our installers know these brands’ hardware, tolerances, and warranty registration requirements, so the warranty is registered in writing before we leave the driveway.
Common Custom Windows & Doors Problems We See in Westgate Homes
Westgate’s housing stock is different from the newer subdivisions further inland. The problems repeat themselves, and we know them on sight:
- Original jalousie windows flagged by insurance inspectors. The louvered glass panels in Westgate’s 1950s and 1960s concrete-block homes carry no wind-load approval. A single inspector notation on a wind-mitigation report is often what finally forces a whole-house replacement, because the carrier will not renew the policy until the louvered units are gone.
- Non-marine-grade aluminum frames corroding and binding. Salt air near Westgate attacks cheap aluminum extrusions. Within a decade, the sashes bind, the rollers seize, and the window will not close tight enough to keep out wind-driven rain. We replace these with marine-grade or impact-rated units built for coastal exposure.
- Unsealed window-to-block perimeters leaking during thunderstorm season. Westgate’s older homes were set with whatever sealant was available in 1960. After decades of humidity and pressure cycling, the perimeter seal is gone. Wind-driven rain gets into the wall cavity, gypsum gets soft, mold follows. A proper custom window job includes a full perimeter seal, not just a bead of caulk around the outside.
- Sliders and patio doors with failed rollers and bowed frames. The lightweight aluminum sliders popular in Westgate’s small multi-unit rentals were never meant to carry impact glass. When homeowners or landlords try to retrofit a heavier pane into an old frame, the result is a door that will not track and a frame that flexes under wind load. We replace the whole unit, frame and all.
Pricing for Custom Windows & Doors in Westgate, FL
Here are real numbers for Westgate, not vague ranges. A single impact-rated casement window to replace a jalousie unit typically runs $1,100 to $2,400 installed, depending on size and manufacturer. A custom shape window, like an arch or radius top, starts around $1,800 and can reach $4,500 for a large impact-rated unit. Oversized glass panels for a wide patio opening run $2,500 to $7,000, driven by glass thickness, interlayer spec, and the structural reinforcement the opening requires. Commercial storefront glazing replacement in Westgate typically runs $40 to $90 per square foot for impact-rated glass and frame work. The coastal-spec version of any of these costs more up front than an inland-spec window. The cheap spec costs more within a decade, because the frame corrodes, the glass fogs, the seal fails, and the insurance inspector comes back. Call (754) 238-2201 for a free written estimate. We will quote the brands side by side, with the warranty terms stated, so you know exactly what you are paying for.
We Also Serve Cities Near Westgate
Our crews work throughout the surrounding Palm Beach County communities. If you are in Anna Maria, Acacia Villas, Alafaya, or Altamonte Springs, we bring the same specifications, the same warranty registration, and the same Done Right Promise. Most of our Westgate customers come by word of mouth from neighbors in these nearby towns, because the insurance-driven replacement issue does not stop at the city line.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Westgate
Jalousie windows fail wind-mitigation inspections regardless of glass condition because the louvered panels cannot form a sealed pressure barrier, and the original frames carry no Miami-Dade or Palm Beach County wind-load approval. The inspection is about the unit’s structural rating, not whether the glass is cracked. That is why a perfectly intact 1950s jalousie is still a hard stop on a wind-mitigation report, and still a reason for the carrier to non-renew the policy. Replacing the jalousie with an impact-rated casement or fixed picture window is the only fix that clears the flag. Call (754) 238-2201 and we will tell you exactly what the inspector is looking at and what it costs to fix.
You replace the non-marine-grade aluminum with marine-grade or impact-rated frames, and you never retrofit heavy glass into the old extrusion. Salt air near Westgate attacks the anodizing and the hardware on builder-grade aluminum within a decade. We specify frames with marine-grade finishes and stainless or hot-dip galvanized hardware so the new unit does not start corroding on year three. If you own a rental duplex or triplex in Westgate, this one spec decision saves you a second replacement down the road.
Yes, custom shape windows can be impact-rated in virtually any geometry: arches, radii, trapezoids, angles, narrow sidelights. The manufacturer builds the glass and interlayer to the exact shape of the opening, and the frame is engineered for wind load on that geometry. It costs more than a stock rectangle, but settling for a stock window in a non-stock opening means a filler panel, a bad seal, and a window that looks like a patch job. Call (754) 238-2201 and we will quote the custom shape impact unit we would put in our own mother’s house.
A jalousie window leaks conditioned air around every louver, even when closed. On a Westgate rental property we worked off Okeechobee Boulevard, the owner replaced the flagged jalousie units with fusion-welded, impact-rated casements with low-E glass and argon fill, and the property’s summer AC runtime dropped noticeably. The precise energy saving depends on the home’s orientation, insulation, and how many openings are replaced, but the shift from unsealed louvers to a sealed, argon-filled, low-E unit is the single largest window-related efficiency gain available in Westgate’s housing stock.
Because the inland shop is quoting an inland-spec window. A true impact-rated unit built for Westgate’s wind-borne debris region uses a thicker interlayer, a reinforced frame, and marine-grade hardware and finishes. The inland-spec version is cheaper because it is built for a different code zone and a different corrosion environment. It will pass no Westgate wind-mitigation inspection, and it will start corroding at the coast within a few years. The price gap between the coastal spec and the inland spec is the cost of a window that actually works here. We quote both specifications side by side, in writing, so you can see exactly what each one buys. Call (754) 238-2201 and we will put the numbers on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and all of Palm Beach County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.