Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Clermont
Door installation in Clermont runs $850 to $4,600 for most residential projects, depending on the door type and whether the opening needs reframing. We serve Clermont homeowners directly, from the lakefront cottages near Lake Minneola out to Independence, Greater Groves, and the Legends community. When you call TruePane at (754) 238-2201, a live person answers and schedules a real site visit. No voicemail trees, no call centers, no waiting three days for a call back.
What matters in Clermont specifically is the wind-load documentation a door carries. Florida Building Code applies here even though the open coast is 60-plus miles away, and a door without proper product approval can stall a permit or complicate an insurance claim later. We know this because we install doors in Clermont week after week, and we have seen what the building department asks for and what homeowners need when a storm damages a door opening.
Why TruePane Windows & Doors Is Clermont’s Preferred Door Installation Company
TruePane has been in Florida’s residential door and window trade since 2008 through a heritage of craft and community commitment, founded by second-generation glazier Dale Kessler in 2008. We are not a franchise that cycles through subcontractors. We hire local technicians, train apprentices into journeymen, and background-check every uniformed installer who walks into your Clermont home.
Clermont homeowners call us because the quote tells the truth. We put manufacturer lines side by side on paper, state warranty durations in writing, and register both warranty layers before the truck leaves your driveway. That is The Keystone Standard we apply to every door, every opening, every house. If the opening is not flashed correctly at the sill, water gets into the subfloor. If the jamb is not set square, the panel binds. If the pane is not true, the job is not done.
We also answer the phone. A live person at TruePane takes your call 24 hours a day, 7 days a week. When you call at (754) 238-2201 to ask about a fogged French door or an entry door that drags, you talk to a real person who can schedule a site visit and tell you what to expect.
Our Door Installation Services in Clermont
We install residential doors across Clermont in every housing type this city has, from 1950s lakefront cottages near Lake Minneola to concrete-block stucco homes built during the 2000 to 2015 boom and newer construction in the subdivisions ringing the lakes. Each door type below gets installed to the same standard: measured twice, quoted in writing, flashed correctly, set square, warrantied in writing.
That said, most Clermont jobs we handle fall into a few categories. If what you need is not listed here, call us anyway. See our full Door Installation service page or ask directly.
Entry & Swing Doors
Entry doors in Clermont take a beating from direct afternoon UV on west-facing elevations, and wood veneers and hollow cores do not hold up. We install fiberglass and steel entry doors with rot-resistant frames and proper sill flashing, and we set the threshold so the door seals without dragging. On concrete-block stucco homes from the 2000 to 2015 wave, we often replace builder-grade frames that were never flashed correctly at the sill, which is why you see soft subfloor around the door after a few summers of thunderstorms.
Double & French Doors
French doors are the single most common door project in Clermont’s hillside subdivisions. Rear elevations in Greater Groves and the Legends community often face due west to capture lake and pond views, which means the active panel and the insulated glass take direct afternoon sun for years. We install double and French doors with fusion-welded frames, Energy-Efficient Windows - Clermont-grade low-E glass, and a U-factor we will put in writing, not just tell you about on the phone.
Storm Doors
A storm door in Clermont is not just a seasonal cover. It is the first line against wind-driven rain on the front of a house during summer thunderstorms, and it protects the main entry door from UV fading the finish. We install storm doors with full weatherstripping and proper drip caps, and we will not install one over a main door that is already out of square, because the storm door will never close right and you will fight it every day you live in the house.
Bifold & Folding Doors
Sliding & Patio Doors - Clermont like bifold and folding doors on a patio or lanai open a rear living space to the lake air in a way a single swing door never will. These installations demand a level opening, a reinforced header, and rollers and tracks rated for the full panel weight. We install them on concrete-block homes without treating the opening like a standard swing door, because it is not one.
Pivot Doors
Pivot doors are showing up more often in Clermont’s newer custom builds, where a broad front entry makes a statement without taking up interior swing space. A pivot door needs a subfloor that can carry the hinge load and a frame set so the panel swings true at full radius. We have installed enough of them to know exactly where a cheap install goes wrong.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clermont
We are an authorized installer for more than a dozen manufacturer lines including Andersen, Pella service in Clermont, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows, and we carry and quote PGT and CGI product lines regularly for Clermont homeowners who want a Florida Product Approval number on the paperwork. Ply Gem and CWS round out the mid-range options we quote side by side on paper. You will see exactly what you are buying, in writing, with warranty durations stated, before any work starts. That is how a square deal works.
Common Door Installation Problems We See in Clermont Homes
Years of installing doors in Clermont have taught us the same failure modes repeat across this city’s housing stock. Here is what we see:
- West-facing rear doors fogging early. Rear elevations on hillside lots in Greater Groves and the Legends often face due west across a lake or pond. The glass in those French doors and sliding panels sits in direct afternoon sun for years, and the argon fill leaks out of builder-grade insulated glass units three to five years ahead of the same door on the front of the house.
- Un-flashed sills on 2000-2015 boom-era homes. Concrete-block stucco homes built in the master-planned communities of that era often have door frames that were not flashed correctly at the sill. Wind-driven summer rain wicks into the rough opening, softens the subfloor, and you do not know it until the door starts sagging or the laminate near the threshold starts swelling.
- Single-pane aluminum doors on older lakefront cottages. The 1950s to 1970s homes near downtown Clermont and Lake Minneola still carry original single-pane aluminum doors on some openings. Those doors do not meet current Florida Building Code wind-load product-approval requirements, and a full-frame replacement is the only honest fix.
- Warped and fogged double French doors on rear elevations. We replaced a warped, fogged double French door on a rear elevation in the Legends community that faced due west across a pond. The original builder-grade insulated glass unit had lost its argon fill within nine years, and the frame had softened enough that the active panel dragged on the threshold. That is not a homeowner maintenance failure. That is a product and flashing failure.
If you live in Clermont’s hillside subdivisions or newer master-planned communities, you may recognize one or more of these patterns in your own door openings. The good news is that all of them are fixable without moving to a different house.
Pricing for Door Installation in Clermont, FL
Door installation pricing in Clermont runs on a range that depends on the door type, the frame condition, and whether the opening needs reframing. Here is what you are looking at:
- Storm door installation: $450 to $1,300 for a quality door, installed and adjusted.
- Entry door replacement (single, pre-hung). $1,200 to $3,200 depending on manufacturer line, glass package, and hardware.
- Double French door replacement (rear elevation, pre-hung): $2,400 to $4,600, including new sill pan, flashing, and weatherstripping.
- Full-frame replacement where the jamb or subfloor has damage: Add $400 to $900 in labor and materials beyond the door replacement.
- Pivot or custom entry door: $3,500 to $8,000 and up, quoted after measuring the opening.
What moves the price in Clermont is whether the existing rough opening is square, whether the sill flashing needs to be replaced, and whether the manufacturer line you choose carries the wind-load documentation the building department will ask for. A cheap quote that skips the flashing or doesn’t register the warranty is not cheaper. It just moves the cost three years down the road. Call (754) 238-2201 for a free estimate and a written line-item quote.
We Also Serve Cities Near Clermont
Our door installation teams serve all of Door Installation in Clermont and the surrounding Lake County communities. We work regularly in Minneola, Montverde, Ferndale, and Groveland. If you live in one of those cities, same deal applies: live person on the phone, written quote, warranties registered in writing, and the Done Right Promise on every job.
Serving Clermont, FL - Our Local Coverage Area
We’re based in the Clermont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Clermont
Yes. Florida Building Code applies to Clermont regardless of distance from the coast, and exterior doors in residential construction must carry a Florida Product Approval or demonstrate compliance with the wind-load requirements in the code. A door without documented approval can fail a permit review or become a problem during an insurance claim after a storm. We quote only manufacturer lines with solid product-approval paperwork, and we register both warranty layers in writing before we leave your driveway. Call (754) 238-2201 and we will show you the approval documentation on the quote.
Because the rear elevation on those lots faces due west across a lake or pond, and the insulated glass in the French door takes direct afternoon sun for hours every day, year after year. That full exposure accelerates seal degradation and argon loss in builder-grade glass units, causing inter-pane fog years before the front door on the same house shows any problem. The front entry is often shaded or faces north or east. The rear elevation bakes. We install rear French doors with low-E glass and fusion-welded frames that hold up under that exposure, and we will put the U-factor and warranty duration in writing.
Yes, a documented, code-compliant installation can help an insurance claim and may support premium or mitigation-credit reviews, because the insurer can see the door carried the required wind-load documentation and was installed to the permitted standard. An install with no documentation gives the carrier room to question the claim. We pull permits where required in Clermont, and we leave you with the paperwork: product approval, permit, and both warranty layers registered in writing. That documentation is part of what you are paying for.
A Florida Product Approval is a state-level certification that a specific building product, like an exterior door assembly, has been tested and found to meet Florida Building Code requirements for wind loads and structural performance. In Clermont, the building department will ask for it on any permitted exterior door replacement or new installation. A cheap door without a product approval number may not pass permit review, which stalls the job and can void your homeowner’s insurance coverage on that opening. We quote approved products and include the approval number on the paperwork.
In most cases, you can replace just the insulated glass unit if the frame is square, the tracks are sound, and the rollers are not corroded. That is a glass-only replacement, not a full door replacement, and it costs significantly less. We will measure the opening twice, confirm the frame is true, and give you a written quote for the glass replacement with a clear explanation of what we found. If the frame is twisted or the rollers are shot, we will tell you that too, and show you the difference on paper. Call (754) 238-2201 for a site visit and an honest written answer.
If you need door installation in Clermont, call TruePane at (754) 238-2201. A live person answers, we schedule your free estimate, and we give you a written quote with warranty durations stated and both warranty layers registered before the truck leaves your driveway. We stand behind the work, the warranty, and the promise, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Clermont and Lake County with door and window installation done right since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.