Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across High Point
Door installation in High Point runs $450 to $2,800 for a standard entry or storm door, and $1,900 to $6,500 for custom or impact-rated units, depending on the opening and permit requirements. Most jobs take one to three days once the unit arrives. If you’re calling from High Point, we answer the phone live every time, 24 hours a day, at (754) 238-2201.
High Point is not like the incorporated cities around it. This is unincorporated Hernando County, which means county permitting, county inspections, and county wind-load calculations that many contractors who work the coast simply don’t think through. We do. Our Door Installation team has set doors on CBS homes off Citrus Way, on manufactured homes with non-standard rough openings, and on acreage lots where the wind load calculation references Exposure C, not the sheltered assumptions used a few miles west. If you want the job done right and permitted properly the first time, call us. We’ll talk through what your specific opening needs before anyone touches a jamb.
Why TruePane Windows & Doors Is High Point’s Preferred Door Installation Company
We’ve been called out to High Point enough times to know what the county will flag and what it will pass. Dale Kessler founded TruePane in 2008, but the craft goes back further than that: years of glass and door work across Florida, with a live person answering the phone around the clock. That matters here, because a door that fails inspection in High Point can sit for weeks if your installer doesn’t know the Hernando County permitting desk well enough to fix the application the first time.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you’re paying for before you sign. And every TruePane job carries the Done Right Promise: if something isn’t right, we make it right, no paperwork fights, no arguing. That’s The Keystone Standard, and we put it in writing before the truck leaves your driveway.
We also register both layers of manufacturer warranty in writing, with durations stated, before we leave. That’s not a courtesy in High Point. It’s the difference between a warranty that actually pays out and one that quietly doesn’t.
Our Door Installation Services in High Point
Entry & Swing Doors
Entry doors in High Point take a beating from humidity and wind. A steel door that would last 20 years in Ohio can start showing rust at the sill in five years here, especially on slab-on-grade CBS homes where the threshold sits close to grade. We install fiberglass and steel entry doors with proper sill pans, butyl flashing, and thresholds matched to your drainage. On homes with septic systems, the final grade around the door matters more than most people realize, and we check it before we order anything.
Storm Doors
Storm doors in High Point don’t just add light and air. They protect your primary entry door from direct UV and driven rain, which extends the life of the main unit by years. We stock and install full-view and ventilating storm doors in standard and custom sizes, and we always check the wind-load requirement for your specific lot before we pull the permit. An unincorporated lot with open exposure needs a different product than a sheltered lot in a nearby city would.
Double & French Doors
Double and French doors on High Point homes are common on rear patios and pool entries. The challenge here is rarely the door itself. It’s the rough opening. Many of these CBS homes were built with door bucks poured at widths that don’t match any modern double-door unit, which means custom ordering or careful shimming. We measure, quote exactly what the opening needs, and don’t underquote to win the job only to hit you with a change order later.
Bifold & Folding Doors
Bifold and folding door systems are popular on High Point properties with larger patios or screen enclosures. These are heavier units that need a true, level track and a header that can carry the load. On older CBS homes, that sometimes means reinforcing the opening before the track goes up. We scope that before we quote, not after the old door is already on the ground.
Pivot Doors
Pivot doors are a statement. On a High Point custom home or a remodel, a pivot door changes the whole entry. They’re also heavy, sometimes 300 pounds or more, and they need precision hardware and a perfectly plumb jamb. Half-measures show up in the first season as a door that sags and scrapes. We set pivot doors with the same rule Dale keeps on the whiteboard: if the pane is not true, the job is not done.
Arched & Custom Doors
High Point has its share of 1970s and 1980s homes with arched entry openings. Big-box stores don’t sell an arched door that fits those openings off the shelf. We order custom arched and radius units from manufacturers who actually build to your dimensions, and we handle the templating so the curve lands right. That’s the difference between a door that looks like it belongs and one that looks like it was shoehorned in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in High Point
We’re an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper. For High Point homeowners, that includes PGT and CGI impact-rated doors, which matter a great deal under Hernando County’s wind-load requirements, and Ply Gem for budget-conscious entry and storm doors that still meet code when properly flashed. We also service and replace units from CWS and other lines. We order directly from the manufacturer, register both warranty layers in writing, and deliver to High Point addresses weekly.
Common Door Installation Problems We See in High Point Homes
- County inspection rejections for wind load. A permit application that only lists a standard wind load gets rejected because unincorporated High Point requires Exposure C uplift values. We reference the right wind-load design on every permit we pull here.
- Water intrusion at the threshold. On lots with septic systems, a standard sill pan from a big-box store doesn’t account for how grading and drainage shed water at the door. We see thresholds rot out within one rainy season when this isn’t handled. We flash and seal for your specific lot.
- Cracked CBS bucks from standard lag screws. Concrete-block homes need specific anchoring methods. Standard lag screws into a buck can crack the block and skew the jamb, leaving air gaps that leak conditioned air and fail blower-door tests. We anchor for CBS.
- Non-standard rough openings. Many High Point homes built between the 1960s and 1990s have door openings that don’t match any modern standard unit. Ordering off the shelf means gaps, shims, and a door that never quite seals. We measure and custom-order when the opening demands it.
Pricing for Door Installation in High Point, FL
Here’s what we see in High Point today. A standard entry door, steel or fiberglass, typically runs $1,100 to $2,400 installed with hardware and proper flashing. A storm door runs $450 to $1,100. Double French doors run $2,200 to $4,800 depending on size and glass package. Impact-rated units start around $1,900 for a single entry door and go up from there. Custom arched doors run $3,000 to $6,500 because they’re ordered to your opening, not picked off a shelf.
What changes the price in High Point: whether your lot is classified Exposure C for wind load, whether the rough opening is standard or needs custom sizing, whether we’re replacing a rotted jamb or working with an existing buck, and whether your septic setback affects threshold drainage. We scope all of that before we quote. Call (754) 238-2201 and we’ll walk the job with you, on paper, no surprises.
We Also Serve Cities Near High Point
TruePane serves High Point and the surrounding communities across Hernando County. If you’re in Anna Maria, Acacia Villas, Alafaya, or Altamonte Springs, our Door Installation in High Point team is close enough to measure, permit, and install without the long lead times coastal contractors quote. One phone call covers the whole area: (754) 238-2201.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in High Point
High Point is unincorporated Hernando County, where the Florida Building Code requires wind-load design for Exposure C open terrain. That means the permit must reference uplift values that assume no suburban shielding, even if your lot is tucked behind trees. Brooksville, inside city limits with denser development, may qualify for a reduced wind speed. The county doesn’t grandfather anything, and a single door swap still requires the permit to reference the correct wind-load design. We handle that on every High Point permit we pull. Call (754) 238-2201 and we’ll explain what your specific opening needs.
The door itself isn’t subject to septic setback, but the drainage around the threshold is. A new door with improper sill flashing can direct water toward the drain field area, and the county inspector will flag any grading change that affects drainage. We check setbacks before we order and flash the opening so water sheds away from the septic and drain field. Call (754) 238-2201 for an exact quote.
If your lot slopes toward the house, or if your septic drain field sits uphill from the entry, a standard threshold won’t shed water fast enough. You need a taller threshold with an extended sill pan and possibly a small swale adjustment. We read the lot before we order. We’d rather spend 20 minutes with a level than install a door that leaks by July. Call (754) 238-2201 for a free estimate.
Sometimes, but not always. Many CBS homes in High Point were built with door bucks poured at rough openings that are 35 1/2 inches or 37 inches, not a true 36. A standard unit will leave a gap or require oversized shims that compromise the seal. We measure every opening twice. If a standard door won’t set true, we’ll tell you before you pay for a unit that won’t pass inspection. Call (754) 238-2201 to schedule a measurement.
If your home falls under the Florida Building Code’s wind-borne debris region and your door is a replacement, the answer is usually yes, unless you have an approved shutter system on that opening. High Point doesn’t get a grandfather bypass. We’ll tell you exactly what the Hernando County permit office will require for your specific opening, and we’ll quote both impact-rated and shutter-compatible options side by side on paper. Call (754) 238-2201 and we’ll sort it out with you.
Get Your High Point Door Installation Done Right
TruePane Windows & Doors is a second-generation glazier’s company, not a franchise playbook. We hire local, train our people, and plan to be in High Point in thirty years. If you need a door that will pass county inspection, hold its seal through a High Point summer, and stand behind the warranty, call (754) 238-2201. A live person answers, 24/7. We’ll come out, measure, quote on paper, and register both warranty layers before we leave. A square deal, done right.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving High Point and Hernando County, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.