Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Limestone Creek
Door installation in Limestone Creek has to account for two forces working against every rough opening: hurricane wind loads that Palm Beach County code won’t budge on, and the karst limestone under our slabs that slowly racks door frames out of square. A door that meets neither requirement will bind, leak, or fail an insurance audit. We’ve been correcting both problems in Limestone Creek homes for years, and we quote every job with the wind-load documentation and shimming tolerance this community actually needs. Call (754) 238-2201 for a free estimate and a written line-item quote.
Why TruePane Windows & Doors Is Limestone Creek’s Preferred Door Installation Company
Homeowners around Limestone Creek call us because we don’t treat a door as a slab that swings. We treat it as the weak point in a wind-rated envelope sitting on shifting ground. That’s why our quotes include the manufacturer’s wind-load documentation, both warranty layers registered in writing before the truck leaves, and perimeter fill that flexes with the slab instead of cracking against it. We’ve pulled more than a few doors off Limestone Creek Road homes where the jamb had racked 3/8 inch out of square in under a year, and we’ve put every one of them back square.
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. Every job carries the Done Right Promise, backed by The Keystone Standard. No paperwork fights, no arguing about who registered what. We stand behind it.
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and Ply Gem, so you get side-by-side quotes on paper and see exactly what you’re buying. A live person answers our phone 24/7, not a voicemail tree or a regional call center. When a Limestone Creek homeowner calls with a binding door or a failed seal, they talk to someone who knows this community’s soil and wind zone.
Our Door Installation Services in Limestone Creek
Entry & Swing Doors
Most entry doors we replace in Limestone Creek are original hollow-core or pre-impact steel units from the late 1980s and early 1990s. They were never built for a 140-155 mph wind-speed design zone. We install impact-rated fiberglass and steel swing doors with reinforced jambs, registered hinges, and threshold systems that keep water out when a storm pushes rain sideways against the slab. Every install includes the wind-load documentation your insurance carrier will ask for.
Storm Doors
A storm door in Limestone Creek isn’t a screen door with a second job. It’s a sacrificial first layer that takes the brunt of wind-driven debris before it reaches your primary door. We quote storm doors with the same impact-rating discipline we apply to entry doors, because a non-rated storm door gives you nothing in a wind-mitigation audit. PGT and CGI both make storm-rated lines we install regularly here.
Arched & Custom Doors
Several 1990s CBS homes in Limestone Creek were built with arched or radius openings. Those openings take extra care on karst substrate, because the arc compounds any frame drift. We template the rough opening at three heights, shim to the actual shape rather than an assumed one, and set the perimeter with flexible foam backer so the custom millwork doesn’t crack when the slab micro-settles. If you’ve been told your arched opening “just won’t hold a straight door anymore,” call us. We’ve heard it before, and we’ve fixed it.
Door Frame Re-Squaring for Settling Homes
This is the job most specific to Limestone Creek. When limestone beneath a CBS slab dissolves unevenly, door rough openings drift out of square within a single season. We pull the existing door, re-square the opening with composite shims, and install the new slab with flexible foam backer at the perimeter instead of rigid fill. No other correction lasts. If your door binds at the latch even after hinge adjustments, this is almost certainly what’s happening underneath your home.
Trusted Brands We Service in Limestone Creek
We install and service doors from PGT, CGI, Ply Gem, CWS, and more than a dozen other authorized manufacturer lines. For Limestone Creek homeowners, that matters in a specific way: when a door needs a replacement threshold, a new sweep, or a warranty part, we can pull from manufacturer inventory and local stock without waiting on a freight shipment from out of state. You’ll see brand names side by side on paper, with warranty durations stated, before you ever sign. No fuzzy verbal promises.
Common Door Installation Problems We See in Limestone Creek Homes
- Binding at the latch or hinge side within months. The limestone substrate under your CBS slab dissolves unevenly, racking the rough opening out of square. Adjusting hinges treats the symptom. Re-squaring the opening with composite shims treats the cause.
- Non-impact doors without wind-load documentation. A cheap door swap that skips the rating and paperwork leaves you unable to produce a wind-mitigation report. Insurance premiums stay high, and a claim after storm damage can be denied outright.
- Cracked perimeter fill around the jamb. Rigid foam or mortar fill doesn’t move with a settling slab. It cracks, loses seal, and allows air and water infiltration that voids the door warranty. We use flexible foam backer for exactly this reason.
- Hollow-core doors in wind-rated openings. Many original Limestone Creek entry doors were hollow-core steel with no impact rating. They flex under wind pressure, separate from their frames, and offer no debris protection. Replacement with an impact-rated slab is the only code-compliant fix.
Pricing for Door Installation in Limestone Creek, FL
A code-compliant entry door installation in Limestone Creek typically runs $1,800 to $4,600, depending on slab size, impact-rating level, and whether the rough opening needs re-squaring. Storm doors land between $900 and $2,400 installed. Arched or custom doors start around $2,800 and can exceed $7,500 for radius work with reinforced jambs and custom millwork. Frame re-squaring alone, when the slab has drifted, adds $250 to $600 and is the difference between a door that binds next season and one that swings clean for years. Every quote is line-item, in writing, before any work begins. Call (754) 238-2201 for your free estimate.
| Service | Typical Range in Limestone Creek |
|---|---|
| Impact-rated entry door (installed) | $1,800 - $4,600 |
| Storm door (installed) | $900 - $2,400 |
| Arched or custom door | $2,800 - $7,500+ |
| Frame re-squaring for settling slab | $250 - $600 |
We Also Serve Cities Near Limestone Creek
Our crews work throughout northern Palm Beach County and the surrounding area. If you’re in Anna Maria, Acacia Villas, Alafaya, or Altamonte Springs, we bring the same wind-load discipline and limestone-aware shimming practices to your door openings. Call (754) 238-2201 and we’ll schedule a free estimate at your home.
Serving Limestone Creek, FL - Our Local Coverage Area
We’re based in the Limestone Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Limestone Creek
A new entry door in Limestone Creek must meet Palm Beach County’s wind-speed design zone requirements, which demand roughly 140-155 mph ratings for windows and doors. That means an impact-rated door with documented product approval, not a standard exterior door. We register the manufacturer’s wind-load documentation in writing before the truck leaves your driveway, so your wind-mitigation report is accurate the day the door goes in. Call (754) 238-2201 for a quote that includes the compliance paperwork, not just the door.
In Limestone Creek, the most common cause is karst limestone dissolution under your CBS slab, which settles unevenly and racks the rough opening out of square. Adjusting hinges can’t fix a frame that’s drifted 3/8 inch or more. The opening itself has to be re-squared with composite shims and the perimeter set with flexible foam backer. We do this repair regularly on homes along Limestone Creek Road and throughout the community. Call (754) 238-2201 and we’ll tell you within the first visit whether your slab is the culprit.
Yes, in most cases. A documented impact-rated door allows your home to pass a wind-mitigation inspection, which typically reduces the windstorm portion of your insurance premium. The key word is documented. A door installed without the product approval and installation paperwork won’t help you. We register both warranty layers and provide the wind-load documentation as a standard part of every Limestone Creek install. Call (754) 238-2201 for a free estimate that includes the paperwork your insurer needs.
Yes. Palm Beach County requires a permit for exterior door replacement, specifically because wind-load compliance has to be verified. We pull the permit, coordinate the inspection, and don’t call the job done until the inspector signs off. A cheap quote that skips the permit leaves you with an undocumented opening and an insurance exposure. Call (754) 238-2201 and ask us what a compliant quote includes; we’ll walk you through the permit steps line by line.
A compliant quote lists the impact rating, the product approval number, the permit fee, and the wind-load documentation in writing. A cheap quote usually doesn’t mention any of those. Look for the manufacturer’s name and model, the rated wind speed, and a line item confirming the permit and inspection. Then look for The Keystone Standard: both warranty layers registered in writing before the installer leaves. If a quote won’t put those in writing, walk. Then call (754) 238-2201 and ask us for a real one. Estimates are free.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Limestone Creek and the surrounding area.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.