Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Margate
Door installation in Margate runs $850 to $4,200 for a standard entry door replacement, depending on whether the rough opening needs masonry work, whether you’re upgrading to a Miami-Dade NOA certified impact door, and which frame line you choose. Most jobs in Margate take one to two days on-site. If your home was built in the 1960s through early 1980s, which describes most of Margate, plan on at least one extra day for chipping out or infilling the original concrete-block rough opening. Call (754) 238-2201 and a live person will walk you through what your specific house actually needs.
We work in Margate every week. We know the difference between a 1965 CBS ranch in Oriole Gardens, a 1970s split-level off Margate Boulevard, and a newer infill build near the Coral Springs line. That matters when you’re anchoring a door into 60-year-old block or coaxing a modern frame into an opening that was sized for a louvered jalousie unit. Our Door Installation team measures every opening twice and quotes manufacturer lines side by side on paper before you commit.
Why TruePane Windows & Doors Is Margate’s Preferred Door Installation Company
TruePane Windows & Doors was founded by second-generation glazier Dale Kessler, a man who still keeps the same whiteboard rule in the shop: if the pane is not true, the job is not done. That applies to doors the same way it applies to glass. We’ve been setting doors into South Florida block walls since 2008, and the parent craft tradition behind this company goes back many years. We’re not a franchise playbook. We’re a local crew with local apprentices who train into journeymen.
Margate homeowners tend to call us after another company told them the job was too complicated, the opening was too narrow, or the permit would take too long. Our answer is usually the same: it’s doable, we’ll pull the permit, and we’ll register both warranty layers in writing before the truck leaves the driveway. That’s the Keystone Standard. Every job is covered by the Done Right Promise, which means if it’s not done right, we make it right. No paperwork fight. No arguing about whose fault it is.
Our technicians are background-checked, uniformed, and they work in a Margate customer’s home the way they’d work in their own mother’s house. You’ll get a written line-item quote before work begins. You’ll get a real person on the phone 24 hours a day, 7 days a week, not a call center. And if you’re a Margate senior or veteran, you’ll get a permanent 5% discount on top of the quote.
Our Door Installation Services in Margate
Here’s what we handle most often in Margate, and what each one actually involves on a CBS home:
Entry & Swing Doors
A standard single entry door in Margate costs $850 to $2,400 installed, but that assumes the rough opening is already dressed and ready. On a 1960s concrete-block home, the original steel frame is often set directly into the block, and the rough opening may be 30 to 32 inches wide. A modern impact-rated fiberglass or steel door needs a 36-inch opening. That means chipping out block, setting a new buck frame, flashing the jamb, and re-anchoring. Add $400 to $800 for that masonry prep on most Margate homes. Our Entry & Swing Door work always includes resetting the sill pan and flashing tape so water never tracks back into the block.
Storm Doors
Margate sees two types of storm door calls. The first is a homeowner who wants a second layer of aluminum or vinyl glazing in front of their existing entry door for ventilation and light. The second is a homeowner whose primary door is an old non-impact unit and they want a code-compliant storm assembly to buy time before a full replacement. Storm doors in Margate run $450 to $1,100 installed. Just know that a storm door alone does not satisfy Broward County HVHZ impact requirements for the primary opening. We will tell you that plainly before you spend the money.
Arched & Custom Doors
Arched door openings are not common on stock 1960s Margate ranches, but we do see them on custom builds and on homes where a previous owner tried to dress up a conventional entry. We template every arch ourselves. No guessing, no ordering a pre-fabricated unit and hoping the radius matches. Custom arched doors in Margate start around $2,800 and can go past $7,000 depending on the radius, the material, and whether the jamb has to be rebuilt. We quote manufacturer lines side by side on paper, so you see exactly what you’re buying before you sign.
Pivot Doors
Pivot doors are heavier than anything a standard hinge system can carry, which means the floor pivot point and the top rail both need reinforced anchoring. In Margate, that anchoring goes into concrete block, not a wood stud wall. We set the pivot plate into an epoxy-set threaded anchor, not a wedge anchor that will loosen as the door cycles. Pivot door installation in Margate runs $3,000 to $6,500, and we always confirm the floor substrate can take the point load before we order the slab.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Margate specifically, we keep CWS and ECO Window Systems product lines in the rotation because their impact-rated frames are dimensioned well for the narrow CBS rough openings we see every week in this city. CGI is the line we most often quote for full replacement entry doors on 1960s block homes. We stock local parts for Margate customers, so a broken hinge, failed seal, or damaged threshold doesn’t mean waiting two weeks for a part to ship.
Common Door Installation Problems We See in Margate Homes
- Non-impact frames in an HVHZ zone. A door that wasn’t Miami-Dade NOA certified fails Broward County inspection and voids your insurance coverage. We see this constantly when a handyman installed a big-box-store door and the homeowner only finds out during a wind-mitigation re-inspection.
- Undersized rough openings in 1960s-1980s CBS homes. The original jalousie or narrow steel-frame opening is often 30 inches wide. Modern impact frames need 36 inches of dressed opening. That means chipping out block, infilling, or reframing before the new door can be set.
- Crumbling masonry around the anchor points. When we anchor an impact door into 60-year-old block that was never sealed, the wedge anchors sit in spalled material and start walking loose. We drill, epoxy-set, and seal every anchor on a Margate block wall.
- Septic and well setback encroachments on acreage lots. Margate’s older acreage parcels have county-regulated setbacks from septic drain fields and wells. A new door swing or stoop landing that encroaches on a required clearance triggers a stop-work order. We verify the property survey and setbacks before we quote.
Pricing for Door Installation in Margate, FL
Here’s the honest breakdown. A standard impact-rated entry door replacement on a Margate block home runs $1,100 to $2,400 for the door and frame. Masonry modification to a 1960s rough opening adds $400 to $800. Storm doors run $450 to $1,100. Arched custom doors start around $2,800. Pivot doors run $3,000 to $6,500. If your home is on acreage with septic or well setbacks that need survey verification, add $150 to $300 for the survey work and any county paperwork. Every quote is a written line item. No change orders mid-job. Call (754) 238-2201 for a free estimate and we’ll tell you what your actual door needs before you spend a dollar.
Key Takeaways for Margate Homeowners:
- Margate sits in Broward County’s High-Velocity Hurricane Zone. Every new entry door must carry Miami-Dade NOA or Florida Product Approval certification.
- Most Margate homes are 1960s-1980s CBS construction with original undersized door openings. Plan for masonry prep.
- We register both manufacturer warranty layers in writing before the truck leaves your driveway. The Done Right Promise covers the workmanship.
- A live person answers (754) 238-2201 24/7. No voicemail tree.
We Also Serve Cities Near Margate
Our crews work throughout northwestern Broward County. Beyond Door Installation in Margate, we regularly take calls from Coconut Creek, Coral Springs, Pompano Beach, and Plantation. If you’re on the edge of Margate near any of those city lines, the same crew, the same pricing, the same warranty applies. Call and ask.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Margate
Because most Margate homes were built in the 1960s through early 1980s with jalousie or narrow steel-frame doors set directly into concrete block, and those original rough openings are usually 30 to 32 inches wide. A modern impact-rated frame needs 36 inches of dressed opening. That means chipping out block, infilling, or resetting the buck frame before the new door can be anchored. Call (754) 238-2201 for a free assessment of your specific opening.
No. Margate is inside Broward County’s High-Velocity Hurricane Zone, and Broward County enforces the same HVHZ standards countywide, even roughly 10 to 15 miles inland. Any new entry door must carry Miami-Dade NOA or Florida Product Approval certification, or it will fail inspection. We verify the certification on-site before final inspection on every Margate job.
Setbacks from your septic drain field and well are county-regulated clearances, and a new door swing, landing, or stoop that encroaches on one of those clearances triggers a stop-work order. We review your property survey and the county setback map before we quote any door relocation or addition on a Margate acreage lot. Call (754) 238-2201 and we’ll walk you through what applies to your parcel.
Fogged jalousie louvered glass means the seal between the lites has failed and moisture is trapped in the unit. You can replace individual louvered glass panels, but understand that a jalousie door provides essentially zero hurricane protection and is a frequent trigger for insurance non-renewal notices in Margate. If you’re replacing the louvered assembly anyway, it’s usually the right time to step up to a certified impact door. We’ll quote both options side by side.
In most cases, yes, but the amount depends on your specific policy, your insurer’s wind-mitigation criteria, and whether the opening was previously unrated. What we can tell you is that a Miami-Dade NOA certified impact door is the single most impactful upgrade you can make to a Margate home’s wind-mitigation profile, and many Margate homeowners are installing them specifically because their insurer flagged a non-impact entry door. Call (754) 238-2201 and we’ll explain the certification paperwork your carrier will need.
If your Margate home still has its original jalousie door, a steel frame that binds in July, or a door opening that was never right, call (754) 238-2201. A live person answers. We’ll measure, we’ll quote in writing, and we’ll do the job the way Dale Kessler set the standard from the first day: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Years of craft and community commitment, serving Margate and all of Broward County with door and window installations done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.