Door Installation in Ocean Ridge - Free In-Home Measure, Written Price

Door Installation in Ocean Ridge, FL: What It Really Costs and What We Find When the Old Door Comes Out

Door installation in Ocean Ridge typically runs between $2,800 and $9,500 for a standard entry or patio door, with full-frame replacements on older homes landing between $5,000 and $14,000 depending on what’s behind the wall. The honest truth: most Ocean Ridge homes built between the 1950s and 1970s need more than a slab swap. Salt air from both the Atlantic and the Intracoastal corrodes frames from the inside out, and when we pull a 60-year-old door, we often find framing that has to be rebuilt before the new unit can go in. That’s not a surprise we spring on you. We write it into the estimate up front, and we price any change order in writing before we touch it. Call (754) 238-2201 to schedule a free estimate.

Fast, Reliable Door Installation Across Ocean Ridge

Ocean Ridge is a different kind of place. Roughly 1,000 homes on a narrow barrier island, the Atlantic on one side, the Intracoastal on the other. Nearly every structure here takes salt exposure from two directions at once, and that changes how doors fail and how they need to be installed. We’ve worked on Tropical Drive, on Old Ocean Boulevard, along A1A, and in the mid-century neighborhoods off North Ocean Boulevard. We know what a 1960s Florida Modern on the Intracoastal side looks like when the original aluminum door finally comes out. We know what Palm Beach County wind-load code requires for a waterfront elevation. And we plan for it before the first screw comes out. If you’re living in Ocean Ridge and your door binds, sticks, or lets daylight through the threshold, call (754) 238-2201. A live person answers.

Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company

We’re not the cheapest bid in Ocean Ridge, and we don’t aim to be. We’re the company homeowners call after they’ve been burned once and want the work done right with no surprises on the bill. TruePane was founded in 2008 by second-generation glazier Dale Kessler, and our crews have been serving South Florida coastal communities ever since. Every Ocean Ridge job is covered by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway.

Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying. And when we open up a door in Ocean Ridge, we don’t pretend the framing behind it is fine if it isn’t. We show you, we photograph it, and we put the fix in writing with a price before we proceed. That’s the difference between a company that plans to be here in thirty years and a crew that’s just passing through. Dispatch and scheduling are coordinated from our South FL office, and our crews serve Ocean Ridge locally.

Our Door Installation Services in Ocean Ridge

Entry & Swing Doors

Entry doors in Ocean Ridge take the brunt of the salt. Ocean-facing swing doors pit at the hinge screws, the jamb cracks, and what looked like a simple slab replacement becomes a full-frame tear-out once the wall is open. We install marine-grade, Florida Product Approved entry doors with sloped sill pans and butyl-flashed rough openings. Every unit gets reset to current Palm Beach County wind-load specs before the inspector arrives.

Storm Doors

A storm door over an original mid-century door seems like a reasonable fix, but on Ocean Ridge’s Intracoastal side it often hides a failing threshold underneath. We assess the existing jamb and sill before we quote a storm door. If the waterproofing is compromised, we rebuild the sill with a pan and sloped flashing before the new door goes in. Otherwise you’re just adding a second door to a frame that’s already wicking salt moisture into the subfloor.

Arched & Custom Doors

Ocean Ridge has a concentration of Florida Modern homes with arched openings and custom door shapes you won’t find in a big-box catalog. We fabricate and install custom arched entry doors, radius-top doors, and fully custom units to match the original opening. Most of these homes were built before standardized framing, so every opening gets measured twice and the replacement is built to the actual dimensions, not a guess.

Pivot Doors

Pivot doors have become popular in Ocean Ridge’s tear-down rebuilds, where owners want a statement entry that also meets coastal wind-load requirements. We install pivot doors rated for Palm Beach County’s wind-borne debris region, with heavy-duty pivot hinges and thresholds designed for salt exposure. These aren’t off-the-shelf units. We order to spec and set them with the same full-frame attention we give a 1960s original.

Our Door Installation Services in Ocean Ridge

Beyond those four, we also handle Double & French Doors and Bifold & Folding Doors for Ocean Ridge homeowners. French doors on Intracoastal-facing elevations need particularly careful sill work, and bifold doors demand exact rough-opening prep to operate smoothly after years of salt-driven expansion and contraction. Every project falls under the same standard: measured twice, quoted on paper, warrantied in writing. If you need Door Installation, our team handles the full scope. And if you’re in Ocean Ridge, you’re getting a crew that knows exactly what this barrier island does to door hardware.

Trusted Brands We Service in Ocean Ridge

We install and service doors from CGI, CWS, and ES Windows, among others. These are Florida Product Approved lines built for the wind and salt conditions we see in Ocean Ridge every day. We stock common hardware and replacement parts for these brands locally, so a seized hinge or failed threshold on a CGI door doesn’t mean waiting two weeks on a parts shipment. These are marine-grade, impact-rated products from manufacturers whose engineers understand what a dual-exposure coastline does to a door. We quote side by side on paper so you see the difference in glass thickness, frame material, and warranty terms before you commit.

Common Door Installation Problems We See in Ocean Ridge Homes

• Salt-driven frame pitting on ocean-facing swing doors. Years of Atlantic spray seizes hinge screws and cracks the jamb. A slab swap turns into a full-frame tear-out once the wall is open because the wood behind the hinge is gone.
• Rotted king studs and undersized headers from wind-driven rain. Original 1950s and 1960s framing often doesn’t meet current wind-load code. When the door comes out, the inspector may require reframing before we close the wall.
• Failed threshold waterproofing on Intracoastal-side doors. Salt-laden moisture wicks into the subfloor from the inside out. The new door’s sill must be rebuilt with sloped flashing and a pan before the unit goes in, or the rot returns in five years.
• Corroded sill pans hidden behind intact-looking doors. On Tropical Drive, we removed a 1960s original aluminum sliding door and found the sill pan eaten through from the inside. The frame stop was gone, the jamb was compromised, and only a full-frame replacement with butyl tape and a marine-grade impact unit would pass inspection. We wrote the change order, got approval in writing, and reset the door to Palm Beach County specs before the inspector arrived.

What Opening Up an Ocean Ridge Door Actually Turns Up

Ocean Ridge is the only municipality in Palm Beach County where residential lots run from the Atlantic Ocean to the Intracoastal Waterway. That means almost every door installation here faces salt-air corrosion from both east and west exposures simultaneously. It’s a dual-front attack that accelerates jamb rot, hinge seizure, and threshold failure faster than in neighboring coastal towns like Manalapan or Delray Beach. When we open up a 1960s original door on the Intracoastal side, we typically find the aluminum sill pan corroded through from the inside out. Hidden salt pitting has eaten the frame stop. The jamb is too compromised for an insert. The header may be undersized for current code. The king studs may be rotted from decades of wind-driven rain. This is the single biggest reason a door replacement quote moves in Ocean Ridge, and it’s exactly what generic door installation pages never mention.

Here’s how we handle it. We inspect first. Before we quote, we look at the existing jamb, the threshold, the surrounding framing, and the exposure. We write allowances into the contract for framing repair, waterproofing rebuild, and any permit-triggered upgrades. If we open the wall and find something the estimate didn’t cover, we stop, show you, price it in writing, and get your approval before we touch it. No change orders you didn’t sign. No surprises on the final bill. That’s the TruePane way, and it’s been the standard since Dale Kessler founded the company in 2008 on a simple rule: if the pane is not true, the job is not done.

Pricing for Door Installation in Ocean Ridge, FL

We Also Serve Cities Near Ocean Ridge

Door installation work from our South FL office regularly covers homeowners in Door Installation in Ocean Ridge and the surrounding communities. We also serve Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re in any of these nearby cities and dealing with a salt-corroded door or a threshold that’s letting moisture in, call (754) 238-2201.

FAQs - Door Installation in Ocean Ridge

Why do door thresholds on Ocean Ridge’s Intracoastal side corrode faster than the ocean side?

The Intracoastal side of Ocean Ridge traps moisture differently. Ocean-facing doors get salt spray but also steady wind that dries them out. The Intracoastal side sits in calmer air with higher ambient humidity, and salt-laden moisture sits on the threshold and wicks into the subfloor rather than evaporating. The sill pan corrodes from the inside out, invisible during a casual walkthrough but discovered during removal. Call (754) 238-2201 and we’ll inspect yours before it fails completely.

Will installing an impact-rated door trigger other code upgrades on my 1960s Ocean Ridge home?

It can. When you pull a permit in Palm Beach County and the inspector sees an original 1960s header or rotted king studs once the door is out, they can require reframing to current wind-load code before signing off. That’s why we write framing allowances into every Ocean Ridge estimate and price any required change order in writing before we proceed. You won’t get surprised mid-install.

Can I keep my original mid-century jalousie door and just add a storm door?

You can, but in Ocean Ridge it’s often a band-aid over a failing threshold. The original jalousie door has been corroding for decades, and adding a storm door doesn’t fix the jamb or the sill. We’ll assess the existing frame before we quote a storm door. If the waterproofing is compromised, we’ll recommend rebuilding the sill with a pan and sloped flashing before the new unit goes in.

What’s the difference between an insert door replacement and a full-frame replacement, and which does Ocean Ridge usually need?

An insert replaces the door slab only, keeping the existing frame. A full-frame replacement tears out the jamb, sill, and trim, then sets a new pre-hung unit into a rebuilt opening. Most Ocean Ridge homes built between the 1950s and 1970s need full-frame work because salt corrosion has compromised the rough opening. The east and west exposures both attack the frame, and by the time a door binds or lets daylight through, the jamb is usually gone.

How long does a door install take in Ocean Ridge with coastal permitting?

A standard insert replacement typically takes one day. A full-frame replacement with reframing and sill rebuild runs two to three days, plus permitting time. Palm Beach County’s coastal inspection process can add a few days to a week depending on the inspection schedule. We’ll give you a written timeline when we quote, and our crew will be there when we say. Call (754) 238-2201 for an exact schedule on your project.

Call TruePane Windows & Doors for Door Installation in Ocean Ridge

If your Ocean Ridge door binds in July, lets salt air through the threshold, or hasn’t opened right since the last storm, call us. We’ll measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. No paperwork fights. No fine print that covers neither. Just a square deal and a door that’s done right. Call (754) 238-2201 today to schedule your free estimate.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and South Florida with years of craft and community commitment.