Door Installation in Tequesta - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Tequesta

Door installation in Tequesta usually costs between $1,800 and $6,500 depending on the door type, frame condition, and whether the opening needs impact-rated glass. Older CBS ranch homes with original jalousie openings typically run higher because the rough opening needs reframing before a modern swing door will sit true. A fiberglass impact-rated entry door on a standard 36-inch opening in Tequesta generally lands between $2,400 and $4,200 installed, including the old door haul-away and a composite sill pan rated for salt exposure. Call (754) 238-2201 and we’ll walk you through what your opening actually needs. Free estimates, no obligation.

Call (754) 238-2201

Why TruePane Windows & Doors Is Tequesta’s Preferred Door Installation Company

We’ve worked on enough homes along Riverside Drive, Country Club Road, and the streets running east toward the Loxahatchee to know exactly what Tequesta’s salt air does to door frames and hardware. The corrosion here is not like what you see ten miles inland. Hinges seize, aluminum thresholds pit, and weatherstripping turns brittle years before it should. We plan for that on every door we set in this village, and that’s the difference between a door that works for ten years and one that binds by its third summer.

Our Tequesta customers deal directly with our team, not a rotating cast of subcontractors. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we leave your driveway. Dale Kessler founded this company on a simple rule that still governs every install we do: if the pane is not true, the job is not done. That standard applies to the door slab, the frame, the threshold, and the flashing behind it.

We’re not the cheapest bid you’ll get in Tequesta. We’re the last call you’ll need to make. Our Done Right Promise covers workmanship with no paperwork fights, and The Keystone Standard puts both manufacturer warranty layers in writing with durations stated. A live person answers our phone 24 hours a day, seven days a week. No voicemail tree, no call center.

Our Door Installation Services in Tequesta

Entry & Swing Doors

Most Tequesta homes built between the late 1950s and mid-1970s have single-panel aluminum or wood entry doors that were never rated for wind-borne debris. Replacing one means more than swapping the slab, because the original rough opening often has no proper sill pan and the jamb has been chewed by salt air for fifty years. We install fiberglass and steel entry doors with marine-grade hinges, composite or pressure-treated sill pans, and flashing tape lapped correctly over the pan so water moves out, not in.

Double & French Doors

Double doors on Tequesta’s older ranches and newer riverfront infill homes share the same failure point: the center seam. Salt spray off the Jupiter Inlet works its way into the astragal and the bottom sweep, and within a few years the inactive leaf starts to sag. We set double and French doors with an adjustable astragal, reinforced top jamb, and a threshold system that drains outward. If the opening carries impact-rating requirements, we quote PGT and CGI lines that carry full Florida Product Approval.

Bifold & Folding Doors

Folding door systems on Intracoastal-facing properties in Tequesta live hard. Salt-laden air moving up the Loxahatchee corridor means track rollers, pivot pins, and lock points need marine-grade hardware from day one. We install bifold and multi-slide folding doors with stainless roller assemblies and hardware rated for coastal exposure, and we set the track system dead level before any panel goes up. A folding door that fights you is a track problem, not a panel problem, and we fix the track first.

Pivot Doors

Pivot doors are common on Tequesta’s newer luxury builds, and they demand a different level of precision at the header and the floor pivot. We’ve set pivot doors on riverfront homes where the slab itself had settled a quarter-inch from grade, and the fix required shimming the pivot plate before the door would swing without dragging. If you’re replacing or installing a custom pivot door in Tequesta, we’ll verify the structural header, set the pivot hardware to manufacturer spec, and register both warranty layers before we leave.

Trusted Brands We Service in Tequesta

TruePane is an authorized installer for CGI, PGT, and ES Windows, among more than a dozen manufacturer lines, and our Door Installation team knows which product lines clear Palm Beach County’s wind-load and Florida Product Approval requirements without guesswork. For Tequesta’s salt-air corridor, we typically recommend CGI’s impact-rated door lines for openings that must clear the 180 mph wind-load requirement, and ES Windows for custom arched or oversized openings on riverfront properties. We quote side by side on paper so you see exactly what each line costs and what each warranty covers. That’s the only honest way to compare doors.

Common Door Installation Problems We See in Tequesta Homes

• Pitted aluminum thresholds from salt spray. The tidal exchange at the Jupiter Inlet pushes salt air directly up the Loxahatchee River through Tequesta, and standard aluminum thresholds start pitting within two to three years. We specify composite or marine-grade aluminum at sill level as a baseline on every job here, not as an upsell.
• Rotted sill pans hidden under old doors. Many of Tequesta’s original 1960s ranches were set with no sill pan at all, or with a thin metal pan that salt and rain has eaten through. By the time the door binds or the floor shows staining, the rough opening usually needs surgery, not a door swap.
• Non-impact doors on openings that need a rating. Older CBS ranch homes in Tequesta often still have original jalousie or single-pane doors with no impact resistance. If a storm puts wind-driven debris through that opening, an insurance claim can be denied because the door wasn’t compliant. We replace them with impact-rated doors that carry Florida Product Approval.
• Wrong county permit on the north side of Tequesta. The Palm Beach County / Martin County jurisdictional line bisects the north edge of the village. Jobs on the north side need a Martin County permit with their own portal and inspector. A crew that pulls a Palm Beach County permit by default will stall the whole job at inspection. We check jurisdiction before we quote the permit cost.

Pricing for Door Installation in Tequesta, FL

We Also Serve Cities Near Tequesta

Our crews serve Door Installation in Tequesta and the surrounding communities along the northern Palm Beach County coast. If you’re in Anna Maria, Acacia Villas, Alafaya, or Altamonte Springs, we send the same background-checked technicians, the same written quotes, and the same Done Right Promise. Call (754) 238-2201 and tell us which street you’re on. We’ll route the right crew to you.

FAQs - Door Installation in Tequesta

Key Takeaways

• Door installation in Tequesta runs $1,800 to $6,500 for most homes, with impact-rated fiberglass entries between $2,400 and $4,200.
• Salt air off the Jupiter Inlet corrodes standard aluminum thresholds and hardware within two to three years, so marine-grade hardware and composite sill pans are baseline here, not upsells.
• Any new exterior door in Tequesta must carry Florida Product Approval for impact resistance, not just a wind-load rating.
• The Palm Beach County / Martin County line bisects north Tequesta, and the wrong county permit will delay your inspection.
• TruePane registers both warranty layers in writing before the truck leaves your driveway, and backs workmanship with a Done Right Promise.

Call TruePane for Door Installation in Tequesta

We’re not the cheapest door crew in Tequesta, and we’re comfortable with that. We’re the crew that sets the door true the first time, registers both warranty layers in writing, and still answers the phone if something goes wrong. On a 1960s ranch near the Loxahatchee in Tequesta’s Riverside Drive area, we replaced a corroded aluminum jalousie entry with a fiberglass impact-rated swing door after finding the original sill pan rotted from salt-laden air. We set a composite sill pan, marine-grade hinges, and flashing tape lapped over the new pan before the door went in, because that’s what a 180 mph wind-load requirement demands. That’s the standard we bring to every home in this village. Call (754) 238-2201 for your free estimate, or tell us your street and we’ll tell you what county permit applies before we ever set foot on the job.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tequesta and northern Palm Beach County with honest work and written warranties since 2008.