Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Edgewood
Energy-efficient window replacement in Edgewood, FL typically runs $650-$1,450 per opening for a standard double-pane low-E unit, and most jobs on the city’s mid-century ranch homes take one to two days once permits clear Orange County. If you’re in one of Edgewood’s 1950s-1970s homes, you’re likely looking at original jalousie or single-pane aluminum that can’t meet current Florida Building Code wind-load standards, which means your energy upgrade doubles as a code-compliance job. That’s the part no one tells you until the inspector shows up. Call TruePane Windows & Doors at (754) 238-2201 and we’ll walk you through exactly what your house needs before you spend a dime.
Why TruePane Windows & Doors Is Edgewood’s Preferred Energy-Efficient Windows Company
Dale Kessler founded TruePane in 2008, but the trade knowledge goes back further than that, through a second generation of glaziers who learned early that a window is only as good as the frame it sits in and the flashing around it. We’ve worked on enough Edgewood ranches to know what’s behind the stucco before we open the wall. Homes off Hansrob Road and along Lake Conway Drive were built when Florida’s energy code was a suggestion, and we quote accordingly. Our Energy-Efficient Windows team measures every opening twice and writes the manufacturer lines side by side on paper so you can see exactly what you’re buying.
What Edgewood homeowners tell us they appreciate most is that a live person answers when they call, at any hour. Not a voicemail tree. A person. Our technicians are background-checked, uniformed, and work in your home the way they’d work in their own mother’s house. We hold ourselves to The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. And every job carries the Done Right Promise. If it’s not right, we make it right. No paperwork fights, no arguing.
Our Energy-Efficient Windows Services in Edgewood
Every service below is shaped by what Edgewood’s housing stock actually demands. You won’t get a generic pitch. You’ll get a recommendation that accounts for your home’s age, its exposure, and what Orange County permitting requires.
Low-E & Argon Gas Glass
Low-E coatings reflect infrared heat while letting visible light pass, and argon gas between panes slows thermal transfer. In Edgewood’s climate, that combination is what keeps your July cooling bill from looking like a car payment. Most of the ranches we see need a full insulated glass unit replacement rather than a simple reglaze, because the original single-pane aluminum frames have lost their thermal integrity and the seals are long gone.

ENERGY STAR Replacement Windows
ENERGY STAR units for Central Florida’s climate zone carry a low solar heat gain coefficient (SHGC) and a U-factor that meets the Southern zone threshold. That’s not marketing language; it’s a measurable spec. We quote Andersen and other ENERGY STAR-certified lines side by side so you can compare performance ratings on paper. For Edgewood homes on Lake Conway’s shoreline, we typically recommend a slightly lower SHGC to offset the reflected heat off the water.

Double & Triple Pane Windows
Double-pane insulated glass is the baseline for any Edgewood replacement we do. Triple-pane adds a third layer and a second gas fill, which improves noise reduction and thermal performance, though the added weight matters on older masonry and wood-frame openings. We’ll tell you honestly whether triple-pane is worth the upcharge for your specific exposure, or whether a well-specified double-pane unit does the job for less money.

UV-Blocking & Fade Protection
Central Florida’s UV intensity is brutal on furniture, hardwood floors, and window treatments. Edgewood homes with large rear Florida rooms facing west take the worst of it. Upgraded low-E coatings block a high percentage of UV radiation without turning your windows into dark glass. We can show you comparative samples so you see the difference in visible light transmission before you commit.

Window Energy Audits & Ratings
If you’re not sure which openings are the real energy leaks, we’ll run a window-by-window audit, checking frame condition, seal integrity, glass type, and exposure. You get a written list of what’s urgent, what can wait, and what each fix should cost in Edgewood’s market. No obligation. The audit is part of the free estimate when replacement work is in the picture.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edgewood
We’re an authorized installer for more than a dozen manufacturer lines, and for Edgewood work we frequently quote, ES Windows. Each brings something different to a mid-century ranch: ViewLux offers strong value on impact-rated insulated glass, ES Windows builds a premium aluminum frame that resists the oxidation we see on older local installs, and Andersen gives you a known name with a long warranty history. We don’t push one brand. We put the spec sheets in front of you and let the numbers do the talking.
Common Energy-Efficient Windows Problems We See in Edgewood Homes
After years of working in Central Florida communities, certain failure patterns repeat themselves here more than anywhere else. Edgewood’s housing age and position in Orange County make these the leading calls we run:
- Fogged jalousie windows on rear Florida rooms. The original jalousies on Edgewood ranches cannot be economically retrofitted to current Florida Building Code wind-load standards. A fogged seal or bent louver doesn’t mean a $40 reglaze; it means a full replacement opening with an Orange County permit.
- Aluminum frame oxidation and seal failure. Early aluminum single-pane sliders from the 1960s and 1970s oxidize in Central Florida’s humidity, and once the frame deforms, the seal on any insulated glass unit installed in it will fail prematurely. That’s why a cheap glass-only swap almost never holds up.
- Humidity-driven wood rot at thresholds and jambs. Properties near Lake Conway see moisture-laden air accelerate rot on wood frames and door thresholds. An energy-efficient insert installed over a compromised frame loses its thermal benefit quickly and will fail again within a few years.
- Wind-load non-compliance from prior handyman work. We regularly see Edgewood homes where someone previously swapped a window without pulling an Orange County permit. The work may hold, but when a storm claim or a sale inspection happens, the owner discovers the opening isn’t documented as wind-load compliant. Fixing that after the fact costs more than doing it right the first time.
Pricing for Energy-Efficient Windows in Edgewood, FL
Here are honest numbers for Edgewood’s market. A standard double-pane low-E replacement window in a mid-century ranch opening runs $650-$1,100 per unit, installed. Triple-pane runs $900-$1,450 per opening. Impact-rated units with wind-load documentation add roughly $200-$400 per opening over the non-impact base, depending on size and frame material. If the job involves replacing an original jalousie with a code-compliant casement or fixed unit, expect additional framing work and the Orange County permit fee, which typically pushes that particular opening to $1,200-$1,800. These are all-in numbers: labor, materials, permit, and disposal. We write line-item quotes so you see exactly where every dollar goes. Call (754) 238-2201 for a free estimate, and we’ll give you a written number before we leave.
What Affects the Cost in Edgewood
- Whether the existing opening is a standard size or requires custom fabrication
- Whether the original jalousie or single-pane aluminum frame requires full replacement versus simple unit swap
- Wind-load rating required for your specific exposure and whether the unit must be impact-rated
- Frame material: vinyl, aluminum, or wood composite all price differently
- Permit fees and inspection scheduling through Orange County
We Also Serve Cities Near Edgewood
TruePane serves Edgewood and the surrounding Central Florida communities, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If you’re just outside Edgewood, call us and we’ll confirm coverage for your street. Dispatching is coordinated from our South Florida office, with local crews working Edgewood regularly.
Serving Edgewood, FL - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Edgewood
Yes. Any opening that changes window type from a jalousie to a sealed insulated unit requires an Orange County permit because the new unit must meet current Florida Building Code wind-load standards. The permit and inspection are included in our written quote. Call (754) 238-2201 and we’ll confirm what your specific project needs.
Edgewood falls under Florida’s wind-borne debris region, and replacement windows must meet the design pressure rating specified by the Florida Building Code for the home’s exposure category. We calculate the required design pressure for each opening during the estimate and document compliance for your records. If you’re unsure what your current windows are rated for, our audit will tell you.
Insurance carriers in Florida generally accept documented wind-load-compliant installations, and some offer premium credits or mitigation discounts when you can show the paperwork. The key is that the compliance be documented, not just claimed. We register both warranty layers in writing and provide you with the documentation your insurer will want to see. Ask your agent about specific discounts before you start the job.
Fogging between panes means the sealed insulated glass unit has failed, usually because the frame it sits in is compromised or the original install allowed moisture into the glazing pocket. In Edgewood’s older aluminum frames, putting a good insulating glass unit into an oxidized, out-of-true frame is a waste of money. A proper installation addresses the frame condition first, which is what we do on every job.
No. Tint or solar film on a jalousie window does nothing to address air leakage, and it cannot make the opening wind-load compliant. Worse, applying film to an old jalousie louver can accelerate seal degradation and make the eventual replacement harder. If energy savings and code compliance are the goal, the opening needs a sealed, insulated, wind-load-rated replacement unit, permitted through Orange County.
What a Compliant Quote Includes That a Cheap One Leaves Out
Here’s the part most Edgewood homeowners learn the hard way. A cheap window quote on a 1960s ranch often covers the glass only. No permit. No wind-load documentation. No frame repair. When the inspector or the insurance adjuster later asks for proof the opening meets Florida Building Code, there isn’t any. A compliant quote from TruePane includes the Orange County permit, the design pressure calculation for the opening, the wind-load-rated unit, documented installation, and both manufacturer warranty layers registered in writing. That’s the difference between a receipt and a record. On a ranch just off Lake Conway, our crew replaced a failed aluminum single-pane slider with a ViewLux low-E argon-filled insulated glass unit rated for the required wind pressure. The original jalousie in the rear Florida room forced a permitted opening change to a fusion-welded casement with impact-rated glazing, and we documented the wind-load compliance for the owner’s insurer. That’s the job done the way Edgewood’s housing stock actually requires.
If you’re in Edgewood and you’re tired of windows that fog, frames that oxidize, and cooling bills that climb every July, call us at (754) 238-2201. We’ll give you a written estimate, a straight answer about what your house needs, and the documentation to back it up. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Edgewood and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After