Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Limestone Creek
Impact windows and doors in Limestone Creek are not a luxury add-on. They are the difference between a house that rides out a Category 4 and one that loses its roof to internal pressurization. A full impact retrofit on a typical Limestone Creek CBS home runs $18,000 to $45,000 depending on opening count and frame condition, and the work is usually completed in two to four days once materials arrive. Call TruePane Windows & Doors at (754) 238-2201 for a fixed, written quote. We measure every opening twice, register both warranty layers in writing before the truck leaves your driveway, and stand behind the install for 90 days with no paperwork fights.
We know this community’s houses. The bulk of Limestone Creek’s residential stock is concrete block and stucco from the late 1980s through mid-1990s, built before Florida’s post-2002 unified impact-resistant building code. Those original aluminum single-pane windows and hollow-core entry doors fall far short of what Palm Beach County requires today. We also know the ground under those houses, and we will explain why that matters more here than almost anywhere else in the county.
Why TruePane Windows & Doors Is Limestone Creek’s Preferred Impact Windows & Doors Company
TruePane was founded by second-generation glazier Dale Kessler, and the standard on every job is the one Dale keeps on the whiteboard: if the pane is not true, the job is not done. That is not a slogan. It is the acceptance test our techs use before they pack the truck. Limestone Creek homeowners call us because the work holds up on ground that does not sit still, and because a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. A person.
Our Impact Windows & Doors team has worked throughout northern Palm Beach County for years, and the houses we see in Limestone Creek have a problem most installers in Florida never learn to read. The karst limestone under this community dissolves slowly and unevenly. Slabs settle. Rough openings that were square at installation go out of square within a season or two. A door that closes cleanly in January binds by July. A window flange that sealed tight starts pulling away at the sill. We build for that movement from the first measurement, not after the callback.
Every technician on your job is background-checked and uniformed, and every quote shows manufacturer lines side by side on paper so you see exactly what you are buying. We carry workmanship and both manufacturer warranty layers registered in writing before we leave the driveway. That is The Keystone Standard, and it is non-negotiable.
Our Impact Windows & Doors Services in Limestone Creek
We handle the full scope of impact work in Limestone Creek, from single openings to whole-house retrofits. Here is how that breaks down for the homes we see most often in this community.
Hurricane Impact Windows
Most Limestone Creek homes still carry original aluminum single-pane or early thermal-break windows. Those units do not meet current Palm Beach County wind-load requirements, which sit in the 140 to 155 mph design range for this part of northern Palm Beach County. We replace them with impact-rated insulated glass units, typically casement or horizontal roller styles for CBS openings, sized and shimmed for the frame movement this soil produces.

Impact Entry & French Doors
Entry doors on 1980s and 1990s CBS homes in Limestone Creek are often hollow-core steel or pre-impact single-leaf units with no structural frame tie-in. We install impact-rated entry systems with reinforced jambs and proper header anchoring, then flash the rough opening with flexible perimeter fill that tolerates the micro-settling common in this community.

Impact Sliding Glass Doors
Sliders take the worst of the racking on karst substrate. A three-panel impact slider on a settling CBS slab will bind along the track within a season if the installer set it square and walked away. We set the track with extra shimming tolerance, use flexible foam backer at the perimeter, and verify the panel alignment after the door has cycled a few dozen times. In Limestone Creek, the final adjustment happens after the house moves, not before.

Impact Garage Doors
Garage doors are the most common breach point in hurricane retrofits. Palm Beach County code requires the garage opening to resist the same wind pressures as the rest of the home. We install braced and rated impact garage door systems and verify the track anchoring ties into the CBS wall structure, not just the stucco face.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Limestone Creek
We are an authorized installer for more than a dozen manufacturer lines, and for Limestone Creek work we most often quote PGT, CGI, and CWS because their impact-rated product lines match the wind-load and frame-tie requirements of northern Palm Beach County CBS construction. We keep common replacement hardware and sealant systems stocked for these lines, which means a follow-up adjustment or a warranty part does not sit in a warehouse queue for three weeks. If you have an existing PGT or CGI opening that is binding or fogging, call us. We service what we install and what we did not.
Common Impact Windows & Doors Problems We See in Limestone Creek Homes
- Recurring jamb binding on newly installed impact doors. The limestone substrate continues to rack CBS frames long after installation. If the installer used rigid shims and squared the opening only at installation, the door binds within a season. We account for this movement on day one.
- Perimeter seal failure around impact window flanges. Foundation micro-settling in Limestone Creek pulls flashing tape away from the rough opening over time. Once the tape lifts, water follows the sill and winds up inside the wall. We use flexible foam backer specifically because it moves with the house.
- Insulated glass unit fogging from frame racking stress. When a CBS frame shifts, it transmits stress into the glass unit. The seal fails, argon fill escapes, and fog appears between panes. The fix is not just replacing the glass. It is resetting the unit with movement tolerance so the next seal does not fail the same way.
- Out-of-square rough openings on original 1980s and 1990s aluminum windows. At a late-1980s CBS home just west of I-95, our crew found original double-hung aluminum windows out of square by nearly 3/8 inch from years of foundation micro-settling. We installed impact-rated casement windows with low-E glass and argon fill, using our standard extra shimming tolerance and flexible foam backer at the rough opening. The sashes seat cleanly now, and the U-factor on those openings dropped below 0.30.
Pricing for Impact Windows & Doors in Limestone Creek, FL
A typical impact window replacement in Limestone Creek runs $850 to $1,600 per opening for standard impact-rated insulated glass units in CSI or PGT lines, depending on frame condition and size. Impact entry doors run $2,800 to $6,500 per system including reinforced jamb and flashing work. Impact sliding glass doors run $4,000 to $9,500 depending on panel count and track width. Full-house retrofits on a 1,800-square-foot CBS home generally land between $18,000 and $45,000. The variables are opening count, existing frame condition, and how far out of square the rough openings have drifted. We fix the price in writing after the first measurement, not after the job starts.
We also understand this is real money, and Limestone Creek homeowners who have lived in their houses for twenty years are not looking for a cheap bid they will pay for twice. Call (754) 238-2201 for a free, no-hassle estimate. We will walk the house, measure every opening twice, and hand you a line-item quote you can keep.
We Also Serve Cities Near Limestone Creek
Our crews work throughout northern Palm Beach County, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. If your home is in a neighboring community but the soil underneath it is the same karst limestone, the same installation tolerances apply. Call us at (754) 238-2201 and we will be there when we say.
Serving Limestone Creek, FL - Our Local Coverage Area
We’re based in the Limestone Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Limestone Creek
Limestone Creek sits on karst limestone substrate that dissolves slowly and unevenly, causing chronic micro-settling in CBS homes. Jupiter’s sandy soils drain and settle differently, so the frames in Jupiter move less. In Limestone Creek, we build in extra shimming tolerance and use flexible foam backer at the rough opening perimeter so the window can shift slightly without losing its seal. Call (754) 238-2201 for an exact assessment of your openings.
Yes. The window product itself must carry an impact rating for northern Palm Beach County’s 140 to 155 mph design wind speeds, regardless of the home’s age. The install is what determines whether the opening actually performs to that rating, and on a 1990s CBS home with micro-settling, that means addressing the frame condition first. We include that work in the written quote.
It can bind the track within a single season. When the CBS slab under the door settles unevenly, the track racks, the rollers bind, and the panel stops seating cleanly. We set impact sliders in Limestone Creek with extra shimming tolerance and recheck the panel alignment after the house has had time to move. Call (754) 238-2201 and we will explain what your existing slab means for your door.
Perimeter seal failure around the flange caused by frame movement. The tape lifts, water works its way in, and by the time you notice the inside wall staining, the rough opening has been wet for months. We install with flexible backer and a flashing detail designed for this ground, not a one-size-fits-all detail from the coast.
Yes. An impact entry door carries a much heavier slab and a full structural jamb, so the opening takes far more racking load. The flashing has to flex with the frame movement while still shedding water. We use flexible pan flashing at the sill and a full perimeter backer detail on every impact entry door in Limestone Creek.
Get a Free Estimate for Impact Windows & Doors in Limestone Creek
If you live in Limestone Creek and your windows are original to the house, you already know what the next hurricane season could do. You do not need a high-pressure pitch. You need a measurement, a fixed price in writing, and an install crew that understands the ground your house sits on. Call TruePane Windows & Doors at (754) 238-2201 today. A live person answers, we measure every opening twice, and we stand behind the work with the Done Right Promise and The Keystone Standard. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Limestone Creek and northern Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After