Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across High Point
Sliding door replacement in High Point, FL typically runs $1,400-$4,800 for a standard patio slider, and because this is an unincorporated Florida community, virtually every job requires impact-rated glazing or an approved shutter system to pass inspection. We’ve handled enough High Point openings to know what the wall will show once the old frame comes out. Call (754) 238-2201 for a free estimate, and a live person will answer.
Why TruePane Windows & Doors Is High Point’s Preferred Sliding & Patio Doors Company
We’re not a franchise crew running routes through High Point between bigger markets. Dale Kessler founded TruePane in 2008 after four decades in the glazing trade, and the rule on his whiteboard still governs every job: if the pane is not true, the job is not done. In High Point, that rule has practical weight. The homes here are almost all concrete-block construction from the 1960s through the 1990s, with window bucks poured right into the block. Standard rough openings are rare. Out-of-area contractors underquote these jobs, then surprise homeowners with change orders the day the wall is open. We don’t work that way.
Our Sliding & Patio Doors team has pulled enough corroded aluminum sliders out of High Point homes to know exactly what the permit inspection will check. We measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. The Done Right Promise covers the workmanship, not just the product.
Our Sliding & Patio Doors Services in High Point
Every service below starts with an inspection. Not a quick look at the door. We check the track, the rollers, the buck the frame sits in, and the seal at the threshold. High Point’s humidity and storm-driven rain punish these components faster than drier climates, and you need to know the full picture before you spend anything.
Patio Sliding Doors
Most High Point patios have a single aluminum slider that has been there since the house was built. These units were never impact-rated, and many have failed seals or corroded frames. A replacement in High Point runs $1,400-$4,800 depending on size and manufacturer, and state code requires that the new unit carry a Miami-Dade or Florida Product Approval for impact. We stock and order from manufacturers who maintain those approvals, so the permit package is clean.
Panoramic Sliding Systems
For High Point homeowners who want the wall to open, a panoramic system can replace an old slider and a fixed panel with a multi-track unit that stacks on itself. These are heavier, wider, and require reinforced headers, especially over CBS openings where the existing lintel was sized for a five-foot opening. We quote the framing work, not just the door, so the number you approve is the number you pay.
Heavy-Duty Sliding Doors
Some High Point homes have oversized openings from past additions or converted carports. Off-the-shelf sliders won’t carry that span. Heavy-duty units with reinforced frames and commercial-grade rollers handle the load, and in High Point’s wind zone, the added weight is part of the impact compliance. We custom-order to the exact rough opening, and we don’t shim a small unit into a big hole and call it close enough.
Pocket & Barn Doors
Pocket and barn doors work well in High Point homes where wall space along the patio is tight. The catch is that older CBS interior walls weren’t framed to hide a pocket door kit, and a barn door hangs off the face of the wall, which means finding studs that can carry the rail. We’ll tell you what your wall can hold before you buy hardware.
Screen Door Installation
High Point’s mosquito season runs long, and a sliding screen door that doesn’t seat flat defeats itself. We install and re-screen slider screens with PetScreen and standard fiberglass, and we rebuild the track if the original aluminum frame has been stepped on or hurricane-dented.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in High Point
We’re an authorized installer for more than a dozen manufacturer lines, and for High Point specifically, we carry and order PGT, CGI, and CWS impact systems that meet Florida Product Approval without a fight at inspection. If you have an Andersen or Marvin slider from a previous install, we service those too, and we keep the replacement rollers, sweeps, and locking hardware for the common units in stock so a repair doesn’t sit for a week. Side-by-side quotes on paper mean you see exactly what each line costs before you choose.
Common Sliding & Patio Doors Problems We See in High Point Homes
- Fogged insulated glass. High Point’s heat and humidity accelerate argon loss in older IGUs, leaving the glass with zero insulating value and a permanent haze. The fix is glass replacement into the existing frame, not a whole new door, and we do that without removing the frame from the block wall.
- Corroded aluminum frames and tracks. Salt air and storm rain eat at uncoated aluminum, and after twenty years, the sash drags or won’t lock. We see this on almost every 1970s-era slider we pull in High Point.
- Rotted wood bucks. The wood frame around the original rough opening absorbs water when flashing fails. By the time the door binds, the buck is usually sponge. Code won’t let you set a new impact unit into rotted wood, so the framing gets replaced before the door goes in.
- Failed bottom sweeps and threshold seals. In High Point, these wear out every three to five years, not the ten-year national average. A bad sweep lets in water during summer storms and bugs the rest of the year.
Pricing for Sliding & Patio Doors in High Point, FL
Here are the numbers we quote most often in High Point, FL. A standard two-panel patio slider with impact-rated glass runs $1,400-$4,800 installed. A panoramic multi-slide system runs $5,000-$12,000 depending on panel count and framing. Heavy-duty sliders for oversized openings start at $3,200 and climb with the header work. Screen door installation runs $180-$600 depending on track condition. These are all-in numbers that include the permit, the impact glazing, the labor, and the old door haul-off. The only thing that moves a quote after we start is framing damage hiding inside the wall, and we price that with a written change order before we touch it. Call (754) 238-2201 for a free line-item estimate on your specific opening.
We Also Serve Cities Near High Point
Our crews work throughout the area around High Point, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. Many of the homes in these communities share the same CBS construction and non-standard openings we handle in High Point, which means the quote you get won’t blow up once the wall is open.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in High Point
No. High Point is unincorporated Florida, and the Florida Building Code’s hurricane-mitigation requirement applies with no grandfathering exemption. A single sliding door replacement must carry impact-rated glazing or pair with an approved shutter system, and the job requires a permit. A contractor who tells you otherwise is setting you up for a failed inspection. Call (754) 238-2201 and we’ll walk you through the code requirement for your specific opening.
Fog between the panes means the insulated glass unit’s seal has failed, and High Point’s humidity accelerates that failure. We can replace the sealed glass unit while keeping your existing frame, as long as the frame and track are still sound. The glass replacement runs roughly $350-$900 per panel in High Point depending on size and coating. If the frame is corroded or the buck is rotted, a full replacement makes more sense. Call (754) 238-2201 and we’ll tell you which path applies to your door before you spend anything.
Probably not. Many CBS homes in High Point were built with window bucks poured directly into the block at non-standard rough openings. We pulled a 1970s slider off High Point Boulevard recently with a 70-1/4-inch jamb dimension. No modern stock unit fits that opening. We custom-order to the exact rough size and build the frame to suit, rather than shimming a stock door into a hole it doesn’t belong in. Call (754) 238-2201 for a measurement visit.
You should expect to see the condition of the buck, or the wood frame around the rough opening, before any new door goes in. In High Point homes from the 1960s through the 1990s, that wood is often rotted from storm water wicking through failed flashing. Code requires the framing be sound before we set an impact unit. We write an allowance into the contract for framing repair, and we photograph what we find before requesting approval on any change in writing. Nothing gets touched without your sign-off. Call (754) 238-2201 to have us inspect your existing opening.
In High Point, you should plan on replacing the bottom sweep and threshold seal every three to five years, not the national ten-year average. Our humidity, rain, and heat cycle break down the vinyl and foam faster. If you see daylight under the door or water pooling at the track after a storm, the seal is already gone. Call (754) 238-2201 and we’ll replace it during a same-visit service call, usually for under $125 including the part.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving High Point, FL since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.