Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across South Bay
Window installation in South Bay is not the same job it was when most of these homes went up. The lake wind out of the north, the cane dust off the EAA fields, and forty to seventy years of humidity inside the walls mean every opening tells you something the day you pull the old frame. TruePane has worked in South Bay long enough to know what that something usually is. We measure twice, quote the manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. Call (754) 238-2201 for a free estimate.
Why TruePane Windows & Doors Is South Bay’s Preferred Window Installation Company
Dale Kessler founded TruePane in 2008 on one rule: if the pane is not true, the job is not done. That standard travels to every South Bay job our background-checked, uniformed crew runs. We are not a franchise shop trying to figure out the Muck. We know that a window on the north side of a South Bay house takes wind-driven rain pressure that a house in Belle Glade never sees, and we size and flash for it accordingly.
Our reputation in South Bay is built on the Done Right Promise: if something is off, we fix it, no paperwork fights, no fine print. And when a South Bay homeowner calls, a live person answers. Twenty-four hours a day, seven days a week. Not a voicemail tree. Not a callback request. A person who knows windows and doors and can schedule a measure without sending you through three menus.
We also stand behind the work through The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves. Most South Bay window jobs get completed in a single visit because we prepare for what these older homes actually hide. You get a square deal, which means upfront pricing and no surprise line items on the bill.
Our Window Installation Services in South Bay
A full Window Installation starts with the rough opening, not the box you pull out of it. In South Bay, the rough opening is where the truth lives. Original jalousie and single-pane aluminum frames from the 1950s through 1970s were often set with no flashing tape, no sill pan, and no weep hole protection. We open the wall, check the framing, sister what has rotted, and set the new unit plumb, level, square, and true.
Casement Windows
Casement windows seal tighter against wind pressure than almost any operable style, which matters on the north and west sides of South Bay homes where lake-driven gusts hit hardest. A typical casement replacement in South Bay runs $600-$1,200 per opening, depending on glass package and whether the original jamb is salvageable. For older homes near the lake, we recommend impact-rated casement units from CGI or ES Windows when the budget allows, because the seal is the first line of defense against wind-driven rain.
Single & Double Hung Windows
Most 1960s South Bay homes were built with single-hung aluminum sashes. They oxidize, they bind, they sweat in the summer. A standard double-hung retrofit in South Bay runs $500-$950 per window with full-frame replacement. We prefer full-frame replacement in South Bay because the original openings are often undersized, and a direct insert leaves gaps that lake wind exploits. You get a written line-item quote so you see exactly what the frame, glass, and labor cost as separate numbers.
Fixed & Picture Windows
Fixed and picture windows make sense for the south-facing walls of South Bay homes where you want light and the lake view without an operable sash. Installed cost in South Bay typically lands between $800 and $1,400 per unit for a properly flashed, code-compliant installation with low-E insulated glass. The glass package matters here more than in coastal Palm Beach, because the inland heat load in the afternoon is real, and low-E keeps the AC from running as hard.
Awning Windows
Awning windows hinge at the top and open outward, which lets you run them cracked open during the rainier months without pulling wind-driven water into the house. That is a genuine advantage in South Bay, where the lake side of the house gets hit with horizontal rain even in non-storm weather. Awning units average $550-$1,000 per opening in South Bay, depending on size and glass. They pair well above kitchen sinks and in bathrooms where privacy and air flow both matter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Bay
We are an authorized installer for more than a dozen manufacturer lines, including CGI, CWS, and ES Windows. We put the quotes side by side on paper so you see the glass package, the frame material, and the warranty duration for each line rather than picking from a brochure. When a South Bay homeowner needs a specific sash or hardware replacement, we can typically source it fast through our regular supply chain and stock the common parts locally. No second appointment left hanging while a special-order part works its way across the state.
Common Window Installation Problems We See in South Bay Homes
- Cane-dust-packed weep holes and sill tracks. The EAA harvesting operations throw fine cane fiber into the air all around South Bay, and it settles into every exterior window track. That debris traps moisture against the frame, corrodes the aluminum jambs, and rots weatherstripping long before any storm arrives.
- Under-flashed rough openings from the original build. Most 1950s-1970s South Bay homes were set without sill pans or flashing tape. We pulled windows on a house off Palm Avenue once and found the sill plates damp from lake rain, with no waterproofing barrier at all. Full-frame replacement gives us the chance to flash correctly.
- Undersized framing for modern window dimensions. The original rough openings often do not match today’s standard unit sizes. A direct retrofit leaves gaps, and the north wind finds them. Our crews cut back rotted jambs and sister new framing so the new window seats properly and seals.
- Oxidized aluminum frames from year-round humidity. Inland humidity near Lake Okeechobee accelerates oxidation on aluminum frames far faster than you see in communities ten or fifteen miles south. The sash binds, the thermal seal fails, and the window becomes a wall ornament. Replacement is usually the honest fix.
Pricing for Window Installation in South Bay, FL
For a full-frame window replacement in South Bay, budget $500-$1,400 per opening depending on style, glass package, and whether the rough opening needs framing work. Impact-rated units from CGI, CWS, or ES Windows run higher, typically $900-$2,000 per window, because the laminated glass and reinforced frames cost more to produce and to set correctly. Casement and picture units land on the upper end. Single and double hung replacements fall in the middle.
What moves the number is the condition of the rough opening. If we find rotted jamb or missing flashing, that is additional framing labor. If the permit review triggers electrical or structural requirements, we price that in writing before we touch it, not after. A free estimate from TruePane includes an inspection of the openings we will replace, so your quote reflects the house you actually have, not a perfect-world version of it.
We Also Serve Cities Near South Bay
TruePane works throughout the Glades region, including Window Installation in South Bay, Belle Glade, Lake Harbor, Pahokee, and Clewiston. Our crews coordinate from the brand’s Miami-area office, and scheduling is set so your measure happens when it works for you, not when it works for a dispatcher’s ZIP code sorting system. Call (754) 238-2201 and a live person will set it up.
Serving South Bay, FL - Our Local Coverage Area
We’re based in the South Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in South Bay
That brown dust is cane fiber and agricultural particulate blown in from EAA harvesting operations around South Bay. The fine material settles into the track, packs down with humidity, and traps moisture against the frame. Vacuum the tracks regularly with a narrow crevice tool, but if the accumulation has already corroded the sill or the sash binds, replacement is the reliable fix. Call (754) 238-2201 and we will look at the track condition as part of a free estimate.
Yes, in most cases. Replacing a window in South Bay usually requires a permit, and when the walls open, the code review can surface electrical or framing issues the original builder never addressed. TruePane pulls the permit, schedules the inspection, and prices any code-required upgrade in writing before the work starts. You will not get a surprise change order mid-job. We have handled this for older South Bay homes many times, and we know what the local inspectors look for.
Lake Okeechobee’s open-water fetch north of the city pushes sustained wind-driven rain pressure into windows that would stay dry in neighboring towns farther from the lake. If the window was never flashed or the weep holes are packed with cane dust, the water finds its way through. The fix is full-frame replacement with proper flashing tape, a sill pan, and an impact or fortified glass package suited to the wind exposure. Call (754) 238-2201 for a free estimate on the leak.
If the fog is between the two panes of glass, it is a failed insulated glass unit. Cane dust sits on the outside of the glass and on the frame, not inside the sealed air space. A failed unit means the seal has broken and the low-E or argon gas has leaked out, which is very common in older South Bay homes where aluminum frames expand and contract under inland heat. Replacement of the sash or the full unit fixes it. TruePane replaces failed insulated units as part of a new window installation, and we register the manufacturer warranty in writing before we leave.
If you are replacing windows in South Bay, you must meet current Florida Building Code requirements, which for this wind zone generally means impact-rated or non-impact windows with approved shutters. The original jalousie and single-pane aluminum frames do not meet that standard. TruePane can install impact-rated units from CGI, CWS, or ES Windows, or non-impact units paired with a shutter plan, depending on what the code and your budget call for. We walk you through the options with printed quotes so you make the call with full information.
If you own an older South Bay home and you are tired of the drafts, the binding sashes, and the dust in the tracks, call TruePane at (754) 238-2201. We will schedule a free estimate, inspect the openings, and give you a written line-item quote with the warranty durations stated right on the page. A square deal, done right the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Bay and the Glades region since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.