Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Washington Park
Window installation in Washington Park almost always means a full tear-out of the original jalousie windows on your CBS home and a code-compliant replacement with hurricane-impact-rated glazing. Broward County’s Florida Building Code requires it, and the older blocks near Northwest 22nd Avenue and along 26th Avenue are full of homes where that work is overdue. TruePane Windows & Doors handles the whole job from permit to final inspection, and we’ve done it in Washington Park enough times to know exactly what the inspector will check. Call (754) 238-2201 for a free estimate and we’ll walk you through what your house actually needs.
Why TruePane Windows & Doors Is Washington Park’s Preferred Window Installation Company
We’re not a franchise that sends a different crew every week. TruePane is led by Dale Kessler, a second-generation glazier who has kept the same founding rule on the whiteboard for years: if the pane is not true, the job is not done. Washington Park homeowners have called us after cheap bids fell apart because the installer didn’t pull a permit, or didn’t register the warranty, or installed a window that failed the wind-load inspection. That doesn’t happen on our jobs.
Our technicians are background-checked and uniformed. They measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every window we set in Washington Park. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a regional call center. When you call about a fogged seal or a window that won’t close after a storm, you reach someone who can help.
We’ve worked on the modest CBS homes built in the 1950s through 1970s that make up most of Washington Park. We know the salt-air corrosion on the aluminum frames, the UV-baked seals, the jalousie louvers that rattle in every thunderstorm. We specify products that hold up here, and we stand behind them with our Done Right Promise.
Our Window Installation Services in Washington Park
Single & Double Hung Windows
Single and double hung windows are a common choice for Washington Park’s CBS homes because they fit the existing vertical openings well and give you full control of ventilation on both hot afternoons and mild winter mornings. Many older houses here still have original single-pane aluminum units that sweat, fog, and let wind-driven rain push through during summer squalls. We install fusion-welded vinyl hung units with impact-rated glazing and low-E glass, sized to the opening so the permit drawings match the wall.
Casement Windows
Casement windows crank outward and seal tight against the frame when closed, which makes them a good fit for Washington Park homes that catch the press of a hurricane breeze. They’re also easy to operate for homeowners who don’t want to lift a heavy sash. We typically quote casement windows for bedrooms and sitting areas where cross-ventilation matters. Our Washington Park installs on casement windows always include the full frame replacement, not a sash swap, because the older aluminum frames on homes here won’t carry a new impact-rated sash properly.
Awning Windows
Awning windows hinge at the top and open outward from the bottom, so they shed rain even when they’re open. That’s a real advantage in Broward County’s humid subtropical climate, where afternoon showers come hard and sideways. On Washington Park CBS homes, we often place awning windows above fixed picture units or in bathrooms and laundry rooms where privacy and airflow matter more than a view. If you want to keep air moving on a rainy day without letting water in, this is the window we point to first.
Fixed & Picture Windows
A fixed window does one job: let in light and stay sealed. No tracks, no sashes, no weep holes to clog with salt and grime. For Washington Park living rooms facing the street, a picture window with impact-rated glass gives you daylight and storm protection in one unit. We often pair a large fixed unit with side awning or casement windows so the room still vents. The glass is heavy and the frames are substantial, and the permit paperwork lists the exact impact rating and design pressure the unit carries.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Washington Park
TruePane is an authorized installer for more than a dozen manufacturer lines including PGT, CGI, and Ply Gem. For Washington Park homes within the Broward County high-velocity hurricane zone, PGT and CGI impact-rated lines come up most often because their design pressure ratings clear the code with room to spare. We quote manufacturer lines side by side on paper, so you see the glass package, frame material, and warranty terms for each, not just a lump number. If you already have a brand in mind, we’ll work with it, and we can order parts for repairs on existing windows too.
Common Window Installation Problems We See in Washington Park Homes
- Jalousie windows that fail the code check. Washington Park’s original louvered-glass jalousie windows cannot accept impact film and do not meet Broward County’s hurricane-impact glazing mandate. Any replacement triggers a full tear-out. We’ve seen cheap bids that promised a “louver repair” turn into a stop-work order once the inspector saw the opening.
- Salt-air corrosion on aluminum frames. Decades of humid, salt-laden air have eaten through the original aluminum frames on many Washington Park houses. Sashes jam, weep holes clog, and frames crack at the corners. A new window set into a corroded existing frame won’t seal and won’t pass inspection, which is why we replace the full frame on these homes.
- Missing wind-load documentation. A lot of local installs from years past lack the product approval paperwork that proves the window meets the required design pressure. After a storm claim, an insurance adjuster asks for exactly that paper. Our Washington Park jobs include the complete documentation trail, registered in writing before we leave the job.
- Failed seals from UV and humidity. The same sun and moisture that rust the frames also breaks down the insulating glass seals on older double-pane units. Once the seal fails, the window fogs between the panes and loses its insulating value. On a Washington Park CBS home, that’s repair work we do regularly, and if the frame can’t hold a proper sealed unit, we’ll tell you straight.
Pricing for Window Installation in Washington Park, FL
What you’ll pay in Washington Park depends on the existing window type, the opening size, and the impact rating the code demands. Here are straight numbers for the sub-services this page covers, installed with a permit and full compliance documentation:
- Single hung, impact-rated, average opening: $850 to $1,300 per window
- Double hung, impact-rated, average opening: $950 to $1,550 per window
- Casement, impact-rated, average opening: $1,100 to $1,800 per window
- Awning, impact-rated, average opening: $900 to $1,450 per window
- Fixed / picture, impact-rated, average opening: $1,000 to $2,200 per window, depending on glass area
- Full jalousie-to-impact tear-out on a 1960s CBS home: typically $1,200 to $2,400 per opening once framing repair and flashing are included
A cheap bid on a Washington Park jalousie replacement usually leaves out the permit fee, the wind-load documentation, the flashing tape, and sometimes the impact glazing itself. Our quote lists every line item before you sign. Call (754) 238-2201 for a free estimate and we’ll put your numbers in writing the same day we walk the openings.
We Also Serve Cities Near Washington Park
If you’re just outside Washington Park, you’re still in our service area. We handle Window Installation throughout the surrounding communities, including Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs. The same crew that works the older blocks off Northwest 22nd Avenue in Washington Park can meet you a few minutes away. Call and ask.
Serving Washington Park, FL - Our Local Coverage Area
We’re based in the Washington Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Washington Park
Yes. Any window replacement on a Washington Park home must meet Broward County’s Florida Building Code requirement for hurricane-impact-rated glazing. That means the window carries a design pressure rating and a product approval number, and the permit paperwork must list both. If a bid doesn’t mention impact rating or permit paperwork, the installation won’t comply. Call (754) 238-2201 and we’ll explain exactly what your opening needs before any money changes hands.
Impact film is not an approved substitute for impact-rated glazing on jalousie windows under the current code, and the louvered design will not carry a film that meets the large-missile impact test. Jalousie windows in Washington Park automatically trigger a full-frame replacement when the opening is changed. A quote that says otherwise is selling you a job the inspector will reject.
The exact design pressure depends on the structure’s location and the window’s size and height above grade, but Washington Park homes fall within a High Velocity Hurricane Zone wind-load area. In practice, most windows we install here carry a design pressure of DP 50 or higher, with large fixed units often needing stronger ratings. TruePane calculates the required rating for every opening and lists it on the quote and the permit drawings. Call (754) 238-2201 for a free evaluation of your specific windows.
If your new windows are not documented as code-compliant, your insurer can reduce or deny a damage claim because the opening didn’t meet the required protection level. The product approval paperwork, the permit record, and the passed inspection form the trail an adjuster asks for. TruePane registers both manufacturer warranty layers and provides the compliance documentation before the truck leaves your Washington Park driveway.
In most cases, yes. We look for condensation between the panes, visible seal deterioration, frame corrosion, and gaps that let daylight through at the jambs. On Washington Park homes, the original aluminum frames often show white powdery oxidation and the sashes don’t sit square anymore. We’ll inspect your windows at no charge and tell you what can be repaired and what needs a full replacement. Call (754) 238-2201 to set it up.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Washington Park and surrounding Broward County communities with code-compliant window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.