Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Hillsboro Beach
Window replacement in Hillsboro Beach means dealing with a set of conditions no other town in Broward County faces: dual-saltwater exposure on both sides of a barrier island only a few hundred feet wide, paired with High-Velocity Hurricane Zone code requirements that demand Miami-Dade NOA-approved impact products on every opening. A full-frame replacement on most Hillsboro Beach homes runs $1,200-$2,800 per opening depending on size, glass package, and what we find when the old frame comes out. Our crews coordinate from the South FL office and serve Hillsboro Beach locally, with a live person answering at (754) 238-2201 any hour you call. We measure every opening twice and quote manufacturer lines side by side on paper before you commit to a dollar figure.
Dale Kessler founded TruePane Windows & Doors on a rule that still heads the whiteboard: if the pane is not true, the job is not done. That standard applies to every window we set on Hillsboro Mile, every jalousie we pull from a 1970s oceanfront condo, and every warranty we register before the truck leaves your driveway.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Window Replacement Company
Homeowners in Hillsboro Beach tend to call us after another company has already come and gone. They have a fogged seal nobody fixed, a sliding door that binds every July, or an aluminum frame pitted worse than anything they were warned about. We have spent years in this trade, and Dale Kessler has built this company since 2008 on a simple promise: we stand behind the work in writing, not in conversation.
Our technicians work in Hillsboro Beach homes the way they would work in their own mother’s house. Background-checked, uniformed, and trained as apprentices into journeymen. We register both manufacturer warranty layers before the truck leaves the driveway. Every job carries our Done Right Promise: if it is not done right, we make it right. No paperwork fights. No fine print that covers neither.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. When we quote your Hillsboro Beach replacement, we put the options side by side on paper so you see exactly what you are buying and what each line costs. A square deal, written down.
The salt air here does not forgive shortcuts. We have seen what happens to the wrong hardware specified on an oceanfront elevation. That is why our standard for this island is heavy anodized aluminum or marine-grade powder coat plus solid stainless-steel hardware throughout. Anything less is a callback before the warranty term ends, and we do not want your money for a job that will fail.
Our Window Replacement Services in Hillsboro Beach
Full Frame Replacement
Full-frame replacement means the old window, frame, trim, and flashing come out down to the rough opening. On Hillsboro Beach homes built between the 1960s and 1990s, this is where we find the real story: tar paper flashing that has crumbled to dust, jambs softened by years of salt-laden rain, and rough openings that were undersized from the day the house went up. You see a fogged window. We see a wall cavity that needs rebuild, pressure-treated lumber, and new flashing tape before a new impact-rated unit can be set square. Full-frame replacement in Hillsboro Beach typically runs $1,400-$2,800 per opening on oceanfront or Intracoastal elevations where structural repair is common.
Insert Window Replacement
Insert replacement keeps the existing frame when that frame is still sound and measures true. On hillside and mid-island Hillsboro Beach homes where the original aluminum is intact and only the glass has failed, an insert saves labor and keeps the job tighter. We measure the existing opening twice and confirm the frame has no hidden corrosion in the weep holes or track channels before we recommend this route. Inserts in Hillsboro Beach generally run $800-$1,500 per opening, with impact-rated inserts on the oceanfront side pushing toward the higher end.
Storm Window Replacement
Hillsboro Beach sits in one of only two counties in the nation requiring Miami-Dade NOA-approved impact products. Storm window replacement here is not a seasonal upgrade; it is a structural requirement. We replace failed storm windows with large- and small-missile impact-rated units that carry the NOA number stamped into the frame. If you are on an oceanfront elevation where hurricane exposure is worst-case for Broward County, we specify heavy anodized aluminum with stainless hardware throughout. Expect $900-$2,200 per storm window depending on size and whether we replace the frame or just the sash.
Energy-Efficient Upgrade
Homes in Hillsboro Beach face a thermal double hit: direct Atlantic sun on one side and reflected heat off the Intracoastal on the other. Single-pane aluminum frames from the 1970s do nothing to slow that heat load. We replace them with low-E, argon-filled insulated units that cut solar gain and hold U-factor down where older glass spikes it. When we pull a fogged unit, we often find the argon long gone and the seal failed; the homeowner thought it was a cleaning issue until an August electric bill told the truth. Energy-efficient upgrades in Hillsboro Beach typically run $1,000-$1,900 per opening for impact-rated low-E glass packages.
Impact-Rated Window Replacement
Every replacement on this island must clear HVHZ missile-impact testing. We quote PGT, CGI, and CWS impact lines side by side so you see exactly what each NOA number covers and what each manufacturer charges. On Hillsboro Beach, specifying anything less than heavy anodized aluminum or marine-grade powder coat with solid stainless hardware is a near-certain callback within two to three years. We do not install equipment that will fail that fast. Impact-rated replacement windows here run $1,200-$2,400 per opening, with oceanfront elevations at the top of that range because the glass package must be heavier and the frame finish must survive dual-salt exposure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
We install and service more than a dozen manufacturer lines, and for Hillsboro Beach homes we quote PGT, CGI, and CWS impact products regularly because their NOA approvals hold up to HVHZ inspection. We also order Ply Gem for budget-conscious replacements on the Intracoastal side where exposure is slightly less severe. Because we stock common hardware and track components for these lines, turnaround for Hillsboro Beach customers is faster than a special-order from a company that does not keep parts on the truck. We register both warranty layers from the manufacturer in writing before we leave the job, and we hand you the paperwork with durations stated. No verbal promise. Paper.
Common Window Replacement Problems We See in Hillsboro Beach Homes
- Dual-salt frame pitting within two to three years. Even products marketed as “coastal grade” can show pitting and hardware failure on the oceanfront side of Hillsboro Beach because Atlantic salt hits the front while Intracoastal salt hits the back. The standard here is heavy anodized aluminum or marine-grade powder coat with solid stainless hardware, nothing less.
- Fogged insulated glass mistaken for a cleaning issue. Sealed units fail, the argon escapes, and the U-factor spikes. Homeowners scrub the glass for months before realizing the fog is inside the unit. By then, the energy bill has already climbed.
- Rotted jambs behind original jalousie or single-pane frames. Failed waterproofing lets salt-laden rain into the wall cavity. The first visible sign is often a soft jamb or a window that suddenly binds, by which point the rot has been working for years.
- Undersized rough openings from original 1960s construction. When we pull an old Hillsboro Beach frame, we sometimes find the opening was never built square or sized for a modern impact unit. The fix is structural, and we price it in writing before we touch anything.
Pricing for Window Replacement in Hillsboro Beach, FL
Window replacement in Hillsboro Beach runs higher than in Fort Lauderdale or Deerfield Beach, and the reason is specific: this island requires HVHZ impact-rated products on every opening, and the dual-salt environment demands frame finishes and hardware that survive what standard coastal testing does not replicate. Here is what you can expect:
- Insert window replacement: $800-$1,500 per opening
- Full-frame replacement: $1,400-$2,800 per opening
- Impact-rated replacement (HVHZ required): $1,200-$2,400 per opening
- Storm window replacement: $900-$2,200 per unit
- Energy-efficient low-E upgrade: $1,000-$1,900 per opening
Two things move the number on any Hillsboro Beach job: what we find when the old frame comes out, and where your home sits on the island. Oceanfront elevations cost more because the glass package is heavier and the frame finish must survive Atlantic salt without pitting. If we open a wall and find rotted jambs or undersized framing, we stop, show you what we found, and price the repair in writing before we proceed. No surprise line items. No change orders you did not approve. Call (754) 238-2201 for a free written estimate.
We Also Serve Cities Near Hillsboro Beach
Our crews cover Hillsboro Beach and the surrounding South Florida coast. If you live in Anna Maria, Acacia Villas, Alafaya, or Altamonte Springs, we bring the same standard to your windows. For the full scope of our work, see our Window Replacement team page. And if you are researching specifically what Hillsboro Beach requires, our Window Replacement in Hillsboro Beach guide breaks down the HVHZ code and dual-salt corrosion issues in detail.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Hillsboro Beach
Because Hillsboro Beach sits on a barrier island a few hundred feet wide in places, every replacement must carry Miami-Dade NOA approval and survive dual-saltwater exposure from the Atlantic on one side and the Intracoastal on the other. The frame finish and hardware that inland Broward homes can use will fail here within two to three years. That means heavier glass packages, heavy anodized aluminum or marine-grade powder coat, and stainless hardware throughout. The code and the chemistry both drive the price higher. Call (754) 238-2201 and we will quote your exact openings in writing.
On a 1960s oceanfront or Intracoastal home, full-frame replacement often triggers HVHZ impact compliance on every opening we touch, plus structural corrections when the existing rough openings are undersized or the flashing has failed. We also see permit-mandated updates to waterproofing details, because tar paper flashing from the original build has long since crumbled. The contract includes a written allowance for framing and waterproofing surprises, and any additional work gets priced and approved in writing before we proceed. That is the square deal.
Sometimes yes, but only if the existing frame measures true and shows no pitting, corrosion in the weep holes, or track damage. On oceanfront Hillsboro Beach condos, we rarely find frames in that condition after a few years of dual-salt exposure. If the frame is sound, an insert replacement with a Miami-Dade NOA-approved impact unit works. If it is not, full-frame replacement is the only honest option. We measure twice and tell you straight.
Inland Broward homes might get fifteen years from a standard coastal finish. On the oceanfront side of Hillsboro Beach, even marine-grade powder coat can show pitting within five to seven years if the wrong alloy is underneath it. That is why our standard here is heavy anodized aluminum or marine-grade powder coat plus solid stainless-steel hardware throughout. The Atlantic and the Intracoastal both hit your windows, and no half-measure survives that. Call (754) 238-2201 and we will show you side-by-side manufacturer options in writing.
Because when we pull a 1970s oceanfront frame on Hillsboro Mile, we do not know what is behind it until it is out. We have found tar paper that crumbled to dust, jambs rotted by salt-laden rain, and openings never built square. The allowance is a specific dollar figure in the contract that covers exactly this. If we find damage, we stop, show you the condition, and price the repair in writing before we buy a stick of lumber. You approve the number. Then we proceed. No gray areas, no change orders you never saw coming.
Call (754) 238-2201 to schedule a free estimate for window replacement in Hillsboro Beach. We will measure every opening twice, quote manufacturer lines side by side on paper, and give you a number you can hold us to.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.