Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Margate
Window replacement in Margate means meeting Broward County’s High-Velocity Hurricane Zone code. Not loosely. Not “close enough.” The permit has to pass, the product has to carry a Miami-Dade NOA or Florida Product Approval number, and the anchors have to be set into structural concrete masonry, not the stucco face. We’ve pulled enough failing permits and voided warranties across Margate to know exactly what that looks like. If you’re ready to get a window job done right and documented properly, call (754) 238-2201 for a free estimate.
Why TruePane Windows & Doors Is Margate’s Preferred Window Replacement Company
TruePane was founded by second-generation glazier Dale Kessler in 2008, on a rule that still governs every install: if the pane is not true, the job is not done. Margate homeowners call us because the work gets measured twice, quoted side by side on paper, and registered with both warranty layers before the truck leaves the driveway. That’s The Keystone Standard, and it’s not a slogan. It’s written down.
Our crews know Margate’s housing stock. A 1972 CBS ranch off Northwest 80th Avenue has different rough openings than a 1985 two-story near Margate Boulevard. We chip back concrete block, set new treated jamb anchors, and install frames that hold true in a Category 4 wind-load test. Local reviews from Margate customers consistently name the same things: the team showed up when they said, the work passed inspection the first time, and the warranty paperwork was already registered. Every job is backed by our Done Right Promise. If it’s not done right, we make it right. No arguing, no fine print. Call (754) 238-2201 and a live person answers. Always.
Our Window Replacement Services in Margate
Full Frame Replacement
Full frame replacement is the standard fix for Margate’s older concrete-block homes. The original aluminum or steel frame comes out completely, the rough opening is squared and chipped back to structural masonry where needed, and a new impact-rated frame goes in anchored to the block itself. On nearly every 1960s-to-1980s home we see, the old openings are too shallow or too narrow for modern HVHZ-rated impact frames. A typical full frame replacement in Margate runs $850 to $1,600 per opening, depending on the product line and how much masonry modification the opening requires.
Insert Window Replacement
An insert, sometimes called a pocket replacement, fits a new window unit inside the existing frame. This only works when the existing frame is square, structurally sound, and deep enough to accept the new impact-rated glass pack. In Margate, most original jalousie and single-pane aluminum frames don’t qualify. Inserts can make sense for 1990s-era homes with deeper openings. Expect $500 to $900 per opening. We measure twice before recommending an insert. If the old frame won’t hold true under wind load, we’ll tell you and quote a full frame instead. A square deal, on paper.
Storm Window Replacement
Storm window replacement in Margate isn’t about seasonal protection. It’s about permanent impact-rated glazing that meets Broward County’s HVHZ requirements. This is a compliance-driven replacement, not a comfort add-on. Margate sits roughly 10 to 15 miles inland, but that distance doesn’t exempt any home from the strictest fenestration code in the country. Storm-rated replacement typically runs $700 to $1,400 per opening for a Miami-Dade NOA-certified product, installed with structural anchors. We pull the permit, pass the inspection, and close it out with documentation your insurer can verify.
Energy-Efficient Upgrade
Margate’s humidity and salt-laden air shorten the functional life of older aluminum frames. Upgrading to low-E insulated glass units with thermally broken frames cuts solar heat gain and lowers cooling loads during the long South Florida summer. For Margate homeowners, an energy-efficient upgrade usually lands between $600 and $1,200 per opening depending on glass package and frame material. The energy savings are real, but the bigger payoff is what the replacement does for your insurance standing and your home’s resale position. We quote manufacturer lines side by side on paper so you see exactly what you’re buying.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
TruePane is an authorized installer for more than a dozen manufacturer lines, and we carry local inventory support for CGI, CWS, and ES Windows products in Margate. We don’t push one brand. We quote the lines that fit your opening, your wind-load requirement, and your budget, side by side. If you’ve already priced Andersen or Pella, we’ll show you how those compare to PGT or ES Windows on the same opening. Both warranty layers get registered in writing, with durations stated. That’s The Keystone Standard, and it applies whether the glass is a $400 insert or a $2,400 full-frame impact upgrade.
Common Window Replacement Problems We See in Margate Homes
- Jalousie windows triggering insurance non-renewals. Margate has an unusually high density of 1960s-era jalousie units still in service. Louvered glass provides virtually zero hurricane protection, and insurers are actively flagging these for replacement. A jalousie-to-impact conversion nearly always requires full-frame work because the original opening is too narrow and too shallow.
- Impact products without a NOA or Florida Product Approval number. An impact-rated product that doesn’t carry a Miami-Dade NOA or Florida Product Approval listing will fail Broward County HVHZ inspection. The permit dies. The work gets ripped out. A cheap out-of-town quote that skips this step costs double when the inspector shows up.
- Frames anchored into stucco instead of structural block. Margate’s CBS homes have a stucco face over concrete block. If the installer sets anchors into the stucco face instead of the structural jamb, the frame eventually pulls loose. Seal failure follows, then water intrusion. We set anchors into the block itself, every time.
- Window opening too small for the window. Builders in the 1960s and 1970s framed for narrow steel or jalousie units. A modern impact-frame with the required glass thickness won’t fit cleanly into those old openings. The opening has to be chipped back or infilled. We do that masonry work on nearly every full-frame replacement in Margate.
Pricing for Window Replacement in Margate, FL
A full frame impact replacement in Margate typically ranges from $850 to $1,600 per opening. Inserts run $500 to $900. Storm-rated replacement runs $700 to $1,400. Energy-efficient upgrades fall between $600 and $1,200 per opening. These ranges account for Mason-Dixon product lines, masonry modification, and permit work. The single biggest price driver in Margate is the rough opening. Homes built before 1985 usually need concrete chip-back or infill to accept a modern impact-rated frame. That’s labor, and it’s not optional if the window has to pass HVHZ inspection. Call (754) 238-2201 for a free estimate, and we’ll quote your exact openings, on paper, with both warranty layers listed.
We Also Serve Cities Near Margate
Our Window Replacement crews work across western Broward County. We serve Margate homeowners, plus neighbors in Coconut Creek, Coral Springs, Pompano Beach, and Plantation. If you live near Margate but your insurance paperwork shows a different city line, call us. Window Replacement in Margate is what we do every day, and we’ll tell you honestly if your job falls in our service area.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Margate
Broward County requires every replacement window in Margate to carry a Miami-Dade NOA or Florida Product Approval number and to be installed with anchors set into structural masonry, not the stucco face. The permit has to be pulled before work starts, the product has to match the approved drawings, and the installation has to pass a county inspection before close-out. Call (754) 238-2201 and we’ll walk the permit through with you.
Insurers are flagging jalousie windows in Margate because the louvered glass fails even a basic wind-load test and leaves the home exposed during a hurricane. The replacement window has to carry a Miami-Dade NOA or Florida Product Approval listing to satisfy the insurer. We handle that documentation on every quote, before the truck leaves the driveway.
Yes. Broward County requires a permit for any window replacement in the HVHZ, even if the new unit fits the existing opening. A full-frame replacement almost always requires masonry work, which also triggers permit review. Skipping the permit voids the product warranty and guarantees an insurance fight later. Call (754) 238-2201 for an exact quote that includes the permit.
A compliant quote includes the product’s NOA or Florida Product Approval number, structural masonry anchoring, the permit, the county inspection, and both warranty layers registered in writing. A cheap quote leaves out the masonry work, the permit, and the documentation. Then inspection fails and the homeowner pays twice. We quote it all on paper.
When the permit closes and the NOA or Florida Product Approval is on file, your insurer can verify the replacement meets code and drop the windstorm surcharge or reinstate the policy. The savings come from documentation, not just the glass. We register the warranty layers and close the permit so the paperwork matches the work. Call (754) 238-2201 for a free estimate on a compliant replacement.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.