Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Richmond Heights
Window replacement in Richmond Heights, FL starts around $850 for a basic insert and runs $2,800-$6,400 for a full-frame impact unit on a 1950s CBS home. We schedule most estimates within two business days and complete single-window replacements in one visit. If you’re calling about original jalousie windows, that’s the majority of what we see here, and there’s no retrofit path around Miami-Dade code. Call (754) 238-2201 for a free written estimate.
We know Richmond Heights. Not just the street grids off Lincoln Boulevard and the blocks around Martin Luther King Jr. Memorial Park, but the houses themselves: single-story concrete block and stucco, built between 1955 and 1968, most still carrying their original louvered jalousie frames and hollow-core aluminum sliders. Those windows predate the High Velocity Hurricane Zone rules by decades, and they fail in predictable ways. We’ll tell you what those failures mean, and what it costs to fix them right.
Richmond Heights is one of the most compliance-heavy window markets in the country. Every unit we set here must carry a Miami-Dade Notice of Acceptance. That’s not optional, and it’s not a piece of paper we wave around. It’s the reason a quote from us may look different from one you got ten miles north, and it’s the reason we’d rather explain the rules than cut a corner to win a bid.
Why TruePane Windows & Doors Is Richmond Heights’s Preferred Window Replacement Company
We’ve worked enough homes in Richmond Heights to know what’s behind the stucco before we open it. Original jalousie windows leak. The sill pans were never flashed. The rough openings are often undersized for any modern impact frame, which means the permit triggers reframing work the moment the old unit comes out. Homeowners who’ve called us after another contractor quoted a “simple swap” know the difference. We write the reframe allowance into the estimate before work starts, so the price on the contract is the price on the final bill.
Dale Kessler founded TruePane in 2008, but the trade goes back further than that with him. He’s a second-generation glazier, and the whiteboard in our shop still carries his rule: if the pane is not true, the job is not done. That’s not marketing. It’s how we measure our work on every Richmond Heights install, from a one-window replacement near Jackson Memorial Perrine to a full-home energy upgrade off Coral Reef Drive.
Our Richmond Heights customers get a live person on the phone, 24 hours a day. Not a voicemail tree, not a regional call center. Background-checked, uniformed techs show up when we say they will, and they measure every opening twice. Before we leave, both warranty layers get registered in writing, with durations stated. That’s The Keystone Standard, and every job carries our Done Right Promise.
Our Window Replacement Services in Richmond Heights
Full Frame Replacement
The majority of homes in Richmond Heights were built when window openings were framed for jalousies, and those openings rarely match a modern impact unit. Full frame replacement means we remove the old window down to the block, inspect the rough opening, repair or reframe as needed, flash it properly, and set an NOA-certified unit built for Miami-Dade’s 180+ mph wind-borne debris standards. For pre-1980 CBS construction, this is almost always the right call. A full-frame impact replacement in Richmond Heights typically runs $2,800-$6,400 per opening, including permitting and the reframe allowance written in up front.
Insert Window Replacement
If the existing frame is square, sound, and free of hidden rot, we can set an insert into the old frame and preserve the interior and exterior trim. It’s faster, and on newer Richmond Heights homes or previous replacements that were installed correctly, it’s enough. Inserts run roughly $850-$1,900 per window in this market. The catch is that most original 1950s and 60s frames are not sound once we open them up, which is why we inspect before we quote. We’re in the 33176 and 33157 zip areas regularly, and we know which blocks trend toward inserts and which almost always need full frames.
Storm Window Replacement
Some Richmond Heights homes still carry track-mounted storm panels over aging single-pane glass. Those panels can stop a branch, but they are not a code-compliant hurricane assembly. If your home has original windows with added storm protection, Miami-Dade still requires the glazing itself to meet NOA impact standards. We replace the whole assembly, not just the outer layer, and we’ll show you the NOA documentation for whichever manufacturer line we quote. Depending on size and manufacturer, storm-rated replacement runs $1,400-$4,000 per window.
Energy-Efficient Upgrade
Those original jalousies don’t just leak air. They leak conditioned air, which means your AC runs harder from April through October. We quote low-E insulated glass, argon fill, and warm-edge spacers side by side on paper across manufacturers so you can see exactly what you’re buying. On a typical 1,400-square-foot Richmond Heights ranch, replacing 10-14 jalousie openings with proper impact double-hungs cuts air infiltration dramatically. Most customers report lower FPL bills within the first full cooling season. Upgrade pricing typically lands between $1,200 and $3,800 per opening depending on the line and the frame condition we find on inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richmond Heights
We’re an authorized installer for more than a dozen manufacturer lines, and in Richmond Heights we lean most heavily on CGI, ES Windows, and ECO Window Systems for impact work. These aren’t brands we picked from a catalog. We carry local parts access for them, and our techs know the anchoring schedules and installation tolerances specific to each line. For our Window Replacement customers here, that means a faster turnaround when a part is needed and a manufacturer warranty that actually holds in Miami-Dade’s climate. We quote these lines side by side on paper, with the manufacturer warranty layers registered before the truck leaves your driveway.
Common Window Replacement Problems We See in Richmond Heights Homes
- Fogged jalousie panes. Laminated glass in old jalousie slats breaks down from UV and humidity, but more often what looks like fog is actually moisture inside the frame channel. You can’t reglaze a jalousie slat to modern standards, and film won’t fix it. Ours is a full replacement market.
- Rusted aluminum frames at the sill. Decades of tropical downpours and salt-tinged air corrode the weep system, then water wicks into the rough opening. What starts as a stiff crank or a cloudy corner is often water damage behind the stucco, hidden until we pull the frame.
- Undersized rough openings. 1950s Richmond Heights framing was built for thin jalousies and awning units, not thick impact laminates. When we pull the old unit, the opening is frequently too short or too narrow for a code-approved impact frame. That’s a reframe, and it’s a change to the framing, not the finish.
- Out-of-plane framing in original summer kitchens. Many Richmond Heights homes have rear porches or summer rooms enclosed decades ago by a handyman. Walls there are often out of square and the openings flex. Setting a true pane means correcting the king studs and header, not shimming the gap and caulking the difference.
Pricing for Window Replacement in Richmond Heights, FL
We don’t give phone estimates without seeing the home, and you shouldn’t accept one. A straight insert swap in good framing starts around $850-$1,900. A full-frame impact replacement on an original jalousie opening in Richmond Heights runs $2,800-$6,400 per opening. If you’re doing a whole house of 8-14 windows, plan on $26,000-$48,000 for full-frame impact work with reframing allowances, flashings, and permitting included. The permit cost is real: Miami-Dade requires approved plans for window replacements in the HVHZ, and we pull it. Inspections get scheduled, and we stand there for them. You’ll know every allowance before we open the first wall. Call (754) 238-2201 for a written, line-item estimate in your living room, not over the phone.
We Also Serve Cities Near Richmond Heights
TruePane crews working Window Replacement in Richmond Heights also cover the surrounding communities. We schedule estimates in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs on the same routing days, and our permitting team handles Miami-Dade and county-level paperwork for all of these areas. If you’re just outside Richmond Heights proper, call and ask about our current estimate schedule.
Serving Richmond Heights, FL - Our Local Coverage Area
We’re based in the Richmond Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Richmond Heights
Because Miami-Dade’s HVHZ code does not recognize film or shutters as a compliance path for jalousie windows. The glazing itself must be NOA-certified and impact-rated, and jalousies by design cannot carry that rating. The code requires full removal and replacement with an NOA-certified impact unit. There is no retrofit, no shortcut, no film product that changes this. If a contractor tells you otherwise, ask for the Miami-Dade NOA number for the film. You won’t get one. Call (754) 238-2201 and we’ll explain what a compliant replacement looks like for your specific home.
The NOA is a product approval specific to Miami-Dade County, and it certifies that the exact window assembly including glass, frame, and anchoring has passed impact and pressure testing for the HVHZ. It means the window on your quote cannot be swapped for a similar-looking product with a different frame depth or anchoring system. It also means we cannot legally install the same off-the-shelf impact units in Richmond Heights that we’d set ten miles north in Broward. NOA-compliant product costs more, and the engineering restricts which manufacturers we can quote for your openings. We pass the actual line-item cost through. Call (754) 238-2201 and ask us to show you the NOA documentation for your quote.
We write the reframe allowance into the contract before we start. Here’s the typical sequence on a 1950s Richmond Heights CBS home: we open the wall, cut back rotted wood to solid bearing, sister in new framing, flash with tape, and then set the window. You get a written change order with the actual measurements and the exact additional cost before we do the reframe work. No surprise line items on the final bill. If the rot is structural, we bring in the permit update and adjust the scope in writing. The Done Right Promise covers the reframe as well as the window.
Sometimes. If the insulated glass unit is intact and the frame is sound, a glass-only replacement is possible on a recent double-hung or slider. But on original Richmond Heights aluminum frames, the fog is usually a symptom of frame corrosion and seal failure in the sash itself, not just the glass pack. Replacing the glass in a corroded frame won’t hold a proper seal, and it won’t meet NOA requirements if the window is in the HVHZ. We’ll tell you straight whether a glass pack works or whether the frame has to go. The inspection is free with our estimate.
Most Richmond Heights homeowners we talk to see a 20-40% reduction in their cooling load on rooms where jalousies are replaced, depending on how many windows and which direction they face. Jalousies leak air through every slat edge, and air infiltration is the single biggest efficiency loss on a 60-year-old CBS home. Modern NOA-certified double-hungs with low-E glass and argon fill seal the envelope. You’ll also hear less of the traffic noise from US-1 and the Turnpike, which isn’t an energy number but matters in a neighborhood this close to both. Call (754) 238-2201 for a free estimate, and we’ll spec the right glass package for your house.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Richmond Heights and Miami-Dade County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.