Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in Lantana, FL | TruePane Windows & Doors
We provide independent Andersen Window Installation - Lantana and doors service across Lantana, from full-frame impact replacements in 1950s CBS homes to hardware and glass repair on existing 200 and 400 Series units. The one thing that makes our Andersen work different here is simple: we treat every job as a corrosion inspection first, because Lantana’s salt air does not let you skip that step. Call (754) 238-2201 for a free estimate. We have been setting windows in South Florida since 2008, and Dale Kessler still measures every opening himself.
Why Lantana Residents Choose Us for Andersen Service
Our techs have bench-level familiarity with every Andersen product from the 1960s Strutwall jalousie era to today’s 100 Series Fibrex and A-Series architectural lines, and we know the precise failure points of each in Lantana’s salt-laden CBS housing stock. That matters because a fogged 400 Series sash here is rarely just a seal problem; it is usually the first sign that salt is working on the Perma-Shield cladding and will be through the aluminum within a few seasons. We have spent enough afternoons grinding corroded hardware out of Andersen frames to know which problems are worth repairing and which ones will come back in eighteen months.
We are an independent Andersen service provider, not manufacturer-affiliated or authorized. That independence means we give you straight advice: we will tell you when an OEM replacement part makes sense and when a good aftermarket stainless part will outlast the original in Lantana’s marine air. We are also covered under our Andersen sales & service experience, and every job carries the Done Right Promise: if it is not done right, we make it right, no paperwork and no arguing.
Common Andersen Windows & Doors Problems We Solve in Lantana
- Salt-driven pitting and efflorescence on Perma-Shield aluminum cladding. Lantana sits inside the salt-air corrosion zone created by the Intracoastal Waterway and the Atlantic less than a mile east. We regularly see 200 Series units with pitting deep enough to compromise the seal around the glass within eight to twelve seasons, even on homes not directly on the water. We strip, treat, and repaint where the substrate is still sound, and tell you straight when it is not.
- Corroded operator arms and locking points on 400 Series casement and awning units. Salt-laden spray bypasses the sill weep system and attacks the hardware in place. We see casement cranks that flop open in the wind because the stainless operator arm has given out. We replace the hardware with corrosion-resistant parts and re-secure the locking points.
- Warped or seized jamb liners and tilt latches on 200 Series double-hungs. Humidity cycling in non-air-conditioned CBS Florida rooms does this. The jamb liner swells, the tilt latch binds, and the sash will not stay up. We rebuild the liner assembly and replace the latches rather than telling you to replace the whole window when the frame is still solid.
- Fogged insulated glass units in Andersen Narroline or 400 Series sash. Sustained UV and salt-humidity exposure degrades the factory seal, and the glass pack fogs while the frame remains intact. We can often replace just the glass pack and save the frame, which is the honest fix for many Lantana homeowners.
- Jalousie-to-impact conversions on original Strutwall and louvered Andersen frames. This is the big one in Lantana. The original louvered frames were cast directly into the CBS wall without a standard buck, so replacement means masonry rework before any new Andersen unit can be test-fit.
Andersen Service in Lantana: What Local Conditions Mean for Your Equipment
Here is the one fact that changes everything for Andersen owners in Lantana: because the entire town lies east of the Intracoastal Waterway, any Andersen window replacement that does not use impact-rated glass and a reinforced frame will be rejected by the town building department. This is not true just a mile west in unincorporated Palm Beach County, where non-impact units with shutters are still allowed on older CBS homes. In Lantana, you do not have that option. So when we service an existing Andersen window on a home near Old Key West Road or North Lake Drive, we are not just fixing what is broken; we are evaluating whether the repair will leave you with a unit that still meets Palm Beach County wind-borne debris code. If it will not, we tell you before we do the work, and we show you the numbers on a full-frame A-Series or impact-rated 400 Series replacement side by side with the repair cost. That is the only square way to do it.
Our crew was called to a 1958 CBS original on North Lake Drive near Old Key West Road, where the homeowner had an Andersen 200 Series gliding window with a locked-up sash. The salt air had rotted the black vinyl track insert into the aluminum frame so badly that even our pry bars could not free it. After grinding out the old jalousie buck, we installed a full-frame A-Series impact-rated gliding unit with upgraded stainless hardware and new masonry bucking, then flashed the opening with flexible membrane to keep wind-driven rain out of the block. That is what a Lantana Andersen job typically looks like: the window is half of it, and the opening is the other half.
Andersen Models & Products We Service in Lantana
We work on the full Andersen range found in Lantana homes, including the 200 Series Perma-Shield casements and gliders with their narrow original frames, the 400 Series Tilt-Wash double-hungs that ranch homeowners installed in the 1980s and 1990s, the A-Series architectural lines often specified for full-frame replacements in coastal masonry openings, and the 100 Series Fibrex units used in compact, budget-friendly replacements for small CBS openings. We stock factory-equivalent Andersen sill pans, jamb liners, corner keys, operators, and Perma-Shield paint kits locally for fast Lantana turnaround. For non-structural hardware in corrosion-prone assemblies, we will use quality aftermarket stainless parts when they will outlast the OEM piece in this air. Our Lantana service area coverage means we can usually have the needed parts in the truck the first trip.
Andersen Service Pricing in Lantana
Andersen service pricing in Lantana depends on what we find. A simple hardware replacement on a 400 Series casement or a jamb liner rebuild on a 200 Series double-hung typically runs $180 to $340. A fogged glass pack replacement on a Narroline or 400 Series sash usually falls between $250 and $500 per sash, depending on glass type and whether it needs to meet current impact code. A full-frame jalousie-to-impact swap with an A-Series unit often runs $1,800 to $3,600 per opening including the masonry rework, flashing, and permit work. Your free estimate includes a written line-item quote with both manufacturer warranty layers registered in writing, durations stated, and no surprise line items at the end. Call (754) 238-2201 for an exact number on your openings.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Lantana
Lantana’s entire footprint lies within the salt-air corrosion zone, because the Intracoastal Waterway runs along the town’s eastern edge and the Atlantic sits less than a mile beyond that. Onshore winds push salt-laden air across the whole town, not just the waterfront streets. The pitting is chloride corrosion in the aluminum cladding, and we can treat it if the substrate is still sound. Call (754) 238-2201 and we will tell you whether repair or replacement is the honest call.
No. Lantana’s building department requires impact-rated glazing or an approved secondary protection system on all window and Door Installation - Lantana replacements, and a non-impact Andersen jalousie unit with shutters will not satisfy the code for a replacement opening. The jalousie frames were also cast directly into the CBS block without a standard buck, so nearly all of them need masonry rework to convert to an impact-rated unit regardless.
Mostly, yes. Salt-laden spray from the Intracoastal and ocean air works its way past the sill weep system and corrodes the stainless steel operator arms and locking points. We see this far more often in Lantana than in communities even a few miles inland. The fix is a hardware replacement with corrosion-resistant parts, and we can do it in a single visit. Call (754) 238-2201 for a free estimate.
In most Lantana homes we can replace just the insulated glass pack in a fogged Andersen Narroline or 400 Series sash and keep the original frame, as long as the frame and cladding are still structurally sound and meet current code. If the salt corrosion has pitted the cladding deeply, a full-frame replacement is the better long-term move. We will show you both options on paper before you decide.
A full-frame jalousie-to-impact swap on a 1950s or 1960s CBS home usually takes one to two days including the masonry rework, flashing, and trim. The first hour is loud because the original louvered frames were cast directly into the concrete block without a standard buck, so our crew is running a grinder and hydraulic hammer to reshape the opening before the new Andersen unit can even be test-fit. After that, it is a standard install. Call (754) 238-2201 for a timeline on your specific openings.
Service Areas Near Lantana
Beyond Lantana, we provide Andersen service in neighboring communities including Andersen service in Largo and Andersen service in Lauderdale-by-the-Sea, along with work in nearby Palm Beach County towns along the I-95 corridor and the coast. If you are just over the town line, call us and we will tell you if your home falls in our coverage area.
Book Your Andersen Service in Lantana Today
If your Andersen windows are fogged, corroded, binding, or still original jalousies, call (754) 238-2201 for a free estimate. A live person answers, and we will schedule a time that works. Measure it right the first time, or plan on coming back.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lantana since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.