Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in Wellington, FL | TruePane Windows & Doors
Andersen windows and doors in Wellington need a particular kind of service: one that understands both the equipment and the HOA architectural review process this village runs on. We are TruePane Windows & Doors, an independent Andersen service provider, not a manufacturer dealer. We have been keeping Andersen 200 Series Narroline, 400 Series Tilt-Wash, and Frenchwood gliding doors functioning across Wellington for years, and we know which parts are still serviceable and which are a dead end. Call (754) 238-2201 for a straight answer.
Why Wellington Residents Choose Us for Andersen Service
Our techs have worked on Andersen 200 Series Narroline double-hungs, 400 Series Tilt-Wash units, and A-Series casements across Palm Beach County since before Wellington’s HOA architectural review boards standardized the current finish cards, and we offer the same Andersen service in West Palm Beach. That matters because service here is not just about the window. It is about the bronze or white anodized Perma-Shield color your board requires, the grid pattern on the sample card, and the door hardware finish that has to match what the developer picked thirty years ago. We know which sash balances, weatherstripping profiles, and cladding colors are actually still available, and which are a parts-order dead end.
Dale Kessler founded TruePane in 2008 after years of watching out-of-true installs and voided warranties fail on homeowners who had paid top dollar. He grew up in Kendall, trained at Miami Dade College’s vocational program, and has been setting windows and doors in South Florida for almost three decades. Measure it right the first time, or plan on coming back. That rule governs every Andersen job we take in Wellington.
Common Andersen Windows & Doors Problems We Solve in Wellington
- Narroline cladding oxidation on west-facing windows. The original aluminum cladding on late-1980s Andersen 200 Series Narroline turns chalky white and corrodes at the corners. Wellington sits 12 to 15 miles inland, so it is not salt spray doing the damage. It is decades of afternoon convective storms driving wind-blown rain against west- and south-facing facades from June through October.
- Fogged 400 Series Tilt-Wash sashes flagged during resale inspections. Repeated South Florida heat cycling breaks the seal between panes. Interior condensation appears. Wellington HOAs flag this during resale inspections, and the homeowner is stuck re-glazing or replacing before the sale closes.
- Weep holes packed with landscape debris. Original late-1980s Perma-Shield clad frames sit behind mature landscaping on Wellington lots. Mulch, irrigation overspray, and organic matter pack the weep holes solid. When the afternoon storm hits, water cannot drain, and it forces its way into the stucco cavity.
- Frenchwood gliding door failures on pool-cage walls. Constant humidity and chlorine-adjacent air from screened pool enclosures shorten the life of rollers and interlock strips. A 1990s Frenchwood door on a pool elevation will fail earlier than the same door on a street-side wall.
- Sash balances seized on original Narroline single-hungs. Two block-and-tackle balances seize and the sash will not stay up. This is one of the most common calls we take in Wellington’s late-1980s and early-1990s CBS homes.
Andersen Service in Wellington: What Local Conditions Mean for Your Equipment
Here is what a generic Andersen page will not tell you. Wellington was built out almost entirely between the late 1970s and late 1990s as a master-planned community. That leaves a dense concentration of 25-to-45-year-old concrete block stucco homes with original builder-grade Andersen aluminum single-pane or early double-pane windows that predate Florida’s post-Hurricane Andrew 2002 building code overhaul. Nearly every replacement job is simultaneously a code upgrade to current Palm Beach County wind-load standards and an HOA architectural review board submission, much like the Andersen service in Royal Palm Beach we provide. Wellington’s dozens of gated communities, Olympia, Versailles, Binks Forest, Paddock Park among them, each independently govern approved frame colors, grid styles, and door hardware finishes.
What that means for an Andersen owner is simple. You cannot just order any white window and have it installed next week. Your board may require a specific bronze or white anodized match to the original Andersen Perma-Shield color. The architectural review board has to approve the sample card before a permit can be issued. In some Wellington HOAs, that adds 30 to 45 days to the job. Contractors who do not keep local finish sample cards on hand will stall right there, because they do not know what to submit. We keep those cards, and we stage the submittal the same week we measure.
Our crew pulled the original 1989 Andersen 200 Series Narroline single-hung from a second-floor bedroom overlooking a pool cage in Binks Forest. The aluminum cladding had turned chalky white, the weep holes were packed with years of mulch and irrigation overspray, and the sash would not stay up because both block-and-tackle balances were seized. We measured for a full-frame impact-rated 400 Series Tilt-Wash replacement in the HOA-approved white finish, staged the architectural review submittal the same week, and had the opening re-flashed and stucco-tied to current Palm Beach County wind-load details before the next round of June thunderstorms.
Andersen Models & Products We Service in Wellington
We work on the Andersen lines most common in Wellington’s housing stock. The 200 Series Narroline is the original builder-grade window in late-1980s and 1990s homes. The 400 Series Tilt-Wash shows up as a common upgrade in early 2000s CBS construction. The A-Series appears on custom equestrian estate doors and oversize openings near the equestrian corridor, where wide sliding glass walls and grand double entry doors require special-order impact-rated units. Frenchwood gliding patio doors sit on many 1990s pool-cage walls, and we handle Andersen in Palm Beach Gardens as well.
For parts, we source genuine Andersen balances, weatherstrip, hinges, and latches from authorized distributors whenever the original series is still in production. We use quality aftermarket glazing or seal components only where Andersen has discontinued the exact profile and a structural upgrade is the honest alternative. For Wellington homes with original 200 Series Narroline, we almost always recommend full-frame impact-rated replacement over re-glazing, because the existing frame cannot meet current Palm Beach County wind-load or HOA finish standards. See our broader Andersen sales & service page for what we cover across the region.
Andersen Service Pricing in Wellington
Andersen service pricing in Wellington runs on a few variables: which series you have, whether the hardware is still in production, and whether your HOA review adds time to the permit. A typical service call for a sash balance or roller replacement on a 400 Series Tilt-Wash generally falls between $180 and $340, and that work is usually done in one visit. A fogged double-pane 400 Series sash re-glaze runs $40 to $85 per square foot depending on glass package, while a full-frame impact-rated replacement typically runs $65 to $135 per square foot installed. On original 200 Series Narroline frames that predate current code, we will usually recommend full-frame replacement rather than sinking money into a frame that cannot meet current wind-load standards.
Our estimates are free and written line-item on paper, so you see exactly what you are buying. No change orders once we start. Call (754) 238-2201 and we will measure the opening ourselves, Dale still insists on that part, quote manufacturer lines side by side, and register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies on every job.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well, and we also provide Greenacres Andersen service. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Wellington
Yes. We keep local finish sample cards on hand for the bronze and white anodized finishes Wellington boards commonly require, and we stage the architectural review submittal the same week we measure. Expect 30 to 45 days for board approval in some communities before the permit can be issued. Call (754) 238-2201 and we will walk you through the exact submittal your board needs.
Yes. A full-frame impact-rated 400 Series Tilt-Wash replacement meets current Palm Beach County wind-load requirements for new installations. The original 1987 frame cannot be retrofitted to meet that standard, so we do not try to patch it. We pull the old frame, re-flash the opening, stucco-tie to current detail, and install a unit that passes inspection the first time. Call (754) 238-2201 for a free estimate on your specific openings.
Re-glazing a 400 Series Tilt-Wash sash runs $40 to $85 per square foot depending on the glass package, and it is worth it if the frame and cladding are sound. If the Perma-Shield cladding is corroding at the corners or the frame has shifted out of true, re-glazing only postpones a replacement. We will tell you straight which way to go based on what we find in the opening. Call (754) 238-2201 and we will inspect it for free.
They fail earlier. Constant humidity and chlorine-adjacent air from screened enclosures waste rollers and interlock strips faster than street-side doors or coastal salt-spray exposure. We replace the hardware with genuine Andersen parts when the series is still in production, and we adjust the track and interlock so the door closes square. Call (754) 238-2201 if your patio door is dragging or binding.
Yes. We are an independent Andersen service provider, not manufacturer-affiliated or authorized. We source genuine Andersen parts from authorized distributors when the original series is still in production. For any remaining manufacturer warranty, we register both warranty layers in writing on your behalf and guide the labor claim, but we do not represent Andersen. The Done Right Promise on our own workmanship stands regardless.
Service Areas Near Wellington
Our Wellington service area covers the communities inside and around the village: Olympia, Versailles, Binks Forest, and Paddock Park among them. We also run Andersen service calls in neighboring areas for homeowners who want the same finish-matching and code-compliance discipline. If you are in Wellington service area proper or just outside it, call and ask. For Andersen owners further out, see our Andersen service in Westlake or Andersen service in West Miami pages.
Book Your Andersen Service in Wellington Today
Andersen windows and doors in Wellington deserve a service that understands the HOA finish cards, the wind-load code, and the equipment itself. Call (754) 238-2201 to schedule your free estimate. A live person answers, and we will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wellington since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.