Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Windows & Doors in Mount Dora, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent PGT service across Mount Dora, from historic downtown cottages to lakeside homes on the Harris Chain. We are not a PGT factory outlet or manufacturer affiliate. We’re a local glazing company that repairs and replaces PGT windows and doors, and the defining part of our work in Mount Dora is knowing how to keep PGT units compliant with the Historic Preservation District while holding up to lake-driven humidity that kills insulated glass seals years ahead of schedule. Call (754) 238-2201 for a free estimate.
Why Mount Dora Residents Choose Us for PGT Service
Most of our PGT work in Mount Dora comes from homeowners who already went through one bad repair, or who bought a house with PGT units and never got a straight answer about what was failing. We know these products well enough to tell you when a WinGuard sash can be rebuilt and when a whole unit is the cheaper path. Dale Kessler, our founder, trained at Miami Dade College’s vocational program and has spent close to three decades measuring and setting windows across Florida. He still measures every job himself. That matters in Mount Dora, where a 1920s rough opening is never square, and a PGT unit ordered to the wrong eighth of an inch becomes a very expensive mistake. We show up in uniform, put quotes on paper side by side, and register both warranty layers before the truck leaves your driveway. That’s The Keystone Standard, and we do it on every job, including PGT sales & service work across Lake County.
Common PGT Windows & Doors Problems We Solve in Mount Dora
- IGU seal failure on lake-facing elevations. On Lake Dora waterfront homes, insulating glass unit seals routinely fail in 8 to 10 years, not the 15-plus you’d expect inland. Afternoon UV off the water, constant humidity, and daily thermal cycling cook the seals from the outside. We see fogged PGT WinGuard sashes on west-facing lakeside walls all the time.
- Rotted wood buck frames around older PGT inserts. Mount Dora’s 1890s through 1930s homes often had wood-framed openings, and a PGT insert set into a compromised buck will start to sag. We open the trim, remove the rot, rebuild the buck with laminated lumber, and reset the unit so the sash operates clean again.
- Corroded roller assemblies on PGT sliders. The 1950s through 1970s ranch homes near Lake Dora and Lake Gertrude hold a lot of PGT sliding doors. Lake air works on steel rollers year-round. We replace rollers with factory PGT hardware when available and re-track the sill so the door does not bind in July.
- Weeping hole clogs in PGT aluminum frames. Mount Dora’s oak pollen and lakeside debris pack the weep channels on PGT WinGuard Aluminum frames. Water backs up, intrudes past the weatherstrip, and shows up on the interior sill. We clear, flush, and verify the drainage path before we call it done.
- Historic Preservation Board compliance conflicts. A standard PGT WinGuard unit may not pass review on a contributing structure downtown. We handle the retrofit approval pathway, matching divided-light patterns and sightlines so the board signs off and the impact rating stays intact.
PGT Service in Mount Dora: What Local Conditions Mean for Your Equipment
Mount Dora sits on an elevated ridge above Lake Dora, and the moisture off the Harris Chain does not behave like inland Florida air. West- and southwest-facing elevations take afternoon sun and lake breeze at the same time. That combination shortens IGU seal life on PGT units faster than almost any other factor we track in Lake County. On homes along Lakeshore Drive and the shoreline streets that face open water, seals fail in 8 to 10 years. On the same model PGT WinGuard installed three blocks inland, we routinely see 15-plus years before fog appears. If you own a lakefront home here and your PGT glass is showing condensation between the panes, the lake exposure is the likely culprit, and the repair conversation needs to account for it. A targeted lake-exposure evaluation is part of how we quote, and it is one reason our Mount Dora estimates look different from what a regional chain would write.
Key Takeaways
- Independent service: we are not PGT-authorized or manufacturer-affiliated.
- Factory PGT parts when available, quality aftermarket for obsolete trim only.
- Lake-facing PGT units in Mount Dora fail faster, so we inspect the exposure before quoting.
- Historic Preservation District rules can require custom approval for impact windows.
- Free estimates by phone: (754) 238-2201.
PGT Models & Products We Service in Mount Dora
We work on PGT WinGuard Vinyl and PGT WinGuard Aluminum impact windows, PGT Eze-Breeze porch enclosures, and PGT 5500 Series single-hung and slider lines. WinGuard hardware is the priority for factory parts because impact-rated components are not interchangeable with generic aftermarket pieces. For older or discontinued PGT trim and fasteners, we use high-quality aftermarket only where factory inventory is gone. For pre-2010 PGT units with failed IGUs or wallowed-out frame corners, we’ll tell you straight when a full-unit replacement costs less than rebuilding. That honesty is the difference between a repair bill and a second repair bill.
PGT Service Pricing in Mount Dora
What you pay for PGT service in Mount Dora depends on four things: the model, the failure, the exposure, and whether the home is in the Historic Preservation District. IGU seal replacements on WinGuard sashes run higher on lakefront elevations because we plan for seal work and thermal stress. Roller replacement and weep clearing on a PGT slider are typically the lower end. A free estimate includes the diagnosis, a line-item written quote, and a straight answer on repair versus replace. Call (754) 238-2201 and we’ll walk the job with you.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Mount Dora
Yes, but not without review. The Historic Preservation Board requires replacement windows on contributing structures to match original profiles, divided-light patterns, and material appearance. A standard PGT WinGuard unit may need a custom retrofit approval pathway, including specific exterior cladding colors and grid patterns, before installation can move forward. We handle that paperwork and the board sign-off. Call (754) 238-2201 for a free assessment of your home’specific requirements.
Lake-front homes take intense afternoon sun UV, high ambient moisture off the water, and daily thermal cycling all at once. That combination stresses IGU seals and shortens their life to 8 to 10 years on many PGT units. Inland homes in Mount Dora do not get the same sustained moisture load, so their seals typically last the full manufacturer window.
Yes. PGT WinGuard Vinyl and Aluminum units are designed and tested for Florida’s high-velocity hurricane zones and inland wind zones alike. The product family carries approvals that apply to both coastal and inland installations. We verify the specific approval for your Mount Dora address before quoting any impact window job.
Yes, in most cases. Jalousie openings from the 1950s and 1960s are often wide and shallow, which makes them good candidates for PGT picture units. We frame the opening to code, flash it properly, and install the new unit with low-E glass to cut the heat and glare. The existing opening size and lintel condition dictate everything, so we measure every opening twice before ordering. Call (754) 238-2201 for a free estimate.
Slab elevation and drainage matter more on lakefront lots. If the existing slider sits low on the slab and water has been running toward the track, we need to raise the threshold, correct the falling slope, and rebuild the rough opening before setting the new PGT unit. That work is not hidden-we put it on the quote up front-but a chain estimator who never looked at your slab would miss it. That’s why we walk the property before we write a number. Call (754) 238-2201 for a free estimate.
Service Areas Near Mount Dora
From our base, we serve homeowners in Mount Dora service area, Eustis, Tavares, Leesburg, and the smaller communities around the Harris Chain. We also run PGT service calls for clients who own property further south. For PGT work on the Gulf side, see our pages for PGT service in New Port Richey and PGT service in North Bay Village.
Book Your PGT Service in Mount Dora Today
Call (754) 238-2201 to schedule a free estimate for PGT window or door work in Mount Dora. A live person answers the phone around the clock. We’ll measure, quote on paper, and register both warranty layers before the truck leaves your driveway. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Mount Dora since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After