Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Windows & Doors in Ocean Breeze, FL | TruePane Windows & Doors
We provide independent PGT our Window Installation in Ocean Breeze and door service across Ocean Breeze, FL, and we handle the repairs, retrofits, and replacements that other crews turn down. The one thing that sets our PGT work apart here is simple: almost every Ocean Breeze home is a manufactured or mobile unit from the 1960s through 1980s, which means standard residential PGT units rarely fit without cutting into the structural chassis. We special-order PGT WinGuard, 5500, 7500, and 3000 Series units sized for HUD-code rough openings, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. Call (754) 238-2201 for a free estimate on any PGT window or door in Ocean Breeze.
Why Ocean Breeze Residents Choose Us for PGT Service
We are an independent PGT service provider, not a manufacturer affiliate or authorized dealer. That distinction matters because it means we answer to you, not to a corporate quota. Dale Kessler grew up in Kendall watching his father re-glaze storefronts along the Tamiami Trail, and he trained at Miami Dade College’s vocational program learning to read a rough opening the way a doctor reads an X-ray. That training shows up every time we measure a PGT unit for an Ocean Breeze manufactured home where the opening is 2-1/2 inches narrower than any catalog width and the sill has been eaten by salt air from two directions. We measure every opening twice, we quote manufacturer lines side by side on paper, and we do not leave a job until the pane is true. Years of community service backs that.
Common PGT Windows & Doors Problems We Solve in Ocean Breeze
- Salt-air corrosion on PGT 5500 Series frames. In Ocean Breeze, the Indian River Lagoon sits to the west and the Atlantic sits a mile to the east. That dual salt exposure pits aluminum extrusions within five to seven years, especially on ocean-side elevations. We replace corroded frames, sills, and threshold anchors with marine-grade materials that hold up longer.
- Jalousie-to-impact conversions with undersized framing. Original jalousie windows cannot be replaced in-kind under current Martin County code. Many Ocean Breeze homeowners want PGT impact windows, but the original HUD-code openings are too short for standard PGT 3000 Series units. We special-order non-catalog widths and heights that fit without ripping out the patio wall.
- PGT sliding glass door binding and track scoring. First-row lots along the lagoon see rollers and stainless tracks degrade faster than the same PGT WinGuard units two blocks west. Salt and sand work into the track, the rollers flatten, and the door starts binding. We rebuild the roller assemblies and re-level the track so the door closes without a fight.
- Failed wind-mitigation inspections on older PGT single-pane units. Original storm clips and louvers on 1960s and 1970s PGT windows no longer satisfy Martin County impact-code compliance. We assess what your unit needs to pass inspection and install the correct PGT impact-rated replacement.
- Warped or seized sashes from lagoon humidity. Manufactured homes in Ocean Breeze carry heat and moisture differently than stick-built houses. A PGT sash that swells in July and sticks shut is a common call here. We re-shim, re-balance, and restore smooth operation without replacing the entire window when the frame is still sound.
PGT Service in Ocean Breeze: What Local Conditions Mean for Your Equipment
Ocean Breeze is one of the few cities in Martin County built almost entirely on manufactured-home foundations. Our techs work in this community week after week, and we can tell you from direct experience that a standard PGT WinGuard window ordered from a big-box store will not fit most of these HUD-code rough openings without cutting into the structural chassis. That is not a theory. On Southeast Alamanda Avenue, our tech replaced a PGT 3000 Series single-hung with a corroded lower track and a seized sash lock. The manufactured-home opening was 2-1/2 inches narrower than any residential PGT impact window, so we special-ordered a PGT WinGuard 5500 in a non-catalog width, re-flashed the sill with marine-grade aluminum, and recalibrated both sashes to meet wind-mitigation code. The homeowner had been quoted a full wall reconstruction by a big-box installer. Measure it right the first time, or plan on coming back. For Ocean Breeze, that means knowing manufactured-home framing before you ever pick up a catalog.
PGT Models & Products We Service in Ocean Breeze
We service every PGT line found in Ocean Breeze’s manufactured and mobile homes: PGT WinGuard, PGT 5500 Series, PGT 7500 Series, and PGT 3000 Series. Our parts approach comes from years of seeing what actually fails in salt air. We install genuine PGT replacement parts whenever available because aftermarket rollers and balance shoes rarely match factory tolerances on 5500 and 7500 series. On older PGT 3000 units where OEM parts are discontinued, we recommend full-sash replacement over unreliable retrofits. We keep common PGT hardware stocked locally so Ocean Breeze turnaround is measured in days, not weeks. For full-frame replacements, hurricane impact windows, and wind-mitigation compliance work, we quote the manufacturer line and the warranty terms side by side on paper before any work starts.
PGT Service Pricing in Ocean Breeze
PGT service pricing in Ocean Breeze depends on what we find when we open the wall or the sash. A simple roller and track rebuild on a PGT sliding door typically runs lower than our Door Installation in Ocean Breeze for a full jalousie-to-WinGuard conversion with non-catalog sizing and marine-grade re-flashing. The variables here are almost always the condition of the HUD-code rough opening and how much salt corrosion has reached the sill hardware. Our free estimate includes a full inspection of the opening, a written line-item quote, and both warranty layers registered in writing before we leave. Call (754) 238-2201 and we will give you the exact number for your unit.
Serving Ocean Breeze, FL - Our Local Coverage Area
We’re based in the Ocean Breeze area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Ocean Breeze
Standard PGT WinGuard windows are built for stick-frame residential openings, not HUD-code manufactured-home openings. Ocean Breeze homes from the 1960s through 1980s have non-standard rough openings that are often narrower or shorter than any catalog size, so a big-box unit will not fit without cutting into the structural chassis. We special-order PGT units in non-catalog widths and heights so the window fits the opening, not the other way around. Call (754) 238-2201 for a free measurement.
No. Jalousie windows cannot be replaced in-kind under current Martin County code because the louvered glass cannot meet impact-resistance ratings. What you can do is convert to a PGT WinGuard or 5500 Series impact window sized specifically for the existing HUD-code opening. We do that conversion regularly in Ocean Breeze without demolishing the patio wall.
Yes, and not just because you are close to the ocean. Ocean Breeze sits between the Indian River Lagoon and the Atlantic, so salt air works on every elevation, not just the ocean-facing one. Marine-grade hardware on all PGT frames, sills, and threshold anchors is the difference between a unit that lasts decades and one that pits out in five to seven years.
Generally yes, but the insurance discount depends on the specific features of the installed unit and how your carrier applies Martin County wind-borne debris region requirements. We install PGT WinGuard units that are engineered to pass wind-mitigation inspection the first time. After installation, an independent inspection typically documents the impact rating for your insurer. Call (754) 238-2201 and we will walk you through what your specific home needs.
Salt and sand from the lagoon and the ocean work into the roller track, flatten the rollers, and score the stainless. First-row lots along South Ocean Drive see this far faster than properties two blocks west. The fix is a roller and track rebuild using marine-grade components, not just lubricant. We see this exact failure pattern on PGT WinGuard sliding doors throughout Ocean Breeze. Call (754) 238-2201 for an inspection.
Service Areas Near Ocean Breeze
Beyond Ocean Breeze, we provide PGT sales & service to nearby communities along the Treasure Coast. If your home is in Ocean Breeze service area or just outside it, our techs cover the same manufactured-home replacement work throughout Martin County. We also serve PGT service in Ocean Ridge and PGT service in Ocoee for homeowners in those areas.
Book Your PGT Service in Ocean Breeze Today
Call (754) 238-2201 for a free estimate on any PGT window or door in Ocean Breeze. A live person answers, we will schedule the measurement, and we will quote your exact price in writing before any work starts.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Breeze and Martin County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After