Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Windows & Doors in Seminole, FL | TruePane Windows & Doors
We’re an independent PGT service provider, not a factory-authorized dealer, and we work on PGT frames across Seminole every week. From 2000s WinGuard single-hungs to new 7700 series impact sliders, we carry Gulf-coast-specific sealants, rollers, and hardware to keep PGT windows and doors opening smoothly. What makes our PGT work different here is simple: we understand what salt air and wind-driven rain do to aluminum frames planted 1 to 3 miles from the open Gulf. Call (754) 238-2201 for a straight answer and a price you can hold us to.
Why Seminole Residents Choose Us for PGT Service
Seminole sits in a strange spot for window and door work. It’s not on the beach, so the salt damage isn’t as obvious as it is out on Indian Shores or Madeira Beach. But the onshore breezes carry enough salt that PGT aluminum frames and sill tracks start pitting within a few years. We’ve been pulling apart PGT hardware in this city long enough to know which rollers seize first, which locks corrode fastest, and which track designs trap the most debris. PGT sales & service is a core part of what we do, and in Seminole we see the same failure patterns repeat: salt-pitted sills on east-side CBS ranch homes, debris-packed slider tracks on the blocks closest to Park Boulevard, and original jalousies that finally meet a remodel inspector. Dale Kessler, our owner, has been measuring and setting windows and doors in South Florida for going on three decades. He trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray, slowly and without guessing. He still measures every job himself.
Common PGT Windows & Doors Problems We Solve in Seminole
- Salt pitting on PGT aluminum frames and sill tracks – Living 1 to 3 miles from the Gulf of Mexico means every PGT aluminum frame in Seminole is fighting a losing battle with salt air. We regularly see sill tracks on 5 to 7 year old PGT frames pitted so badly that the weep holes clog and the rollers bind. We clean, re-seal, and replace hardware where it still makes sense, and we tell you straight when it doesn’t.
- Debris-packed lower tracks on PGT sliding glass doors – Sustained onshore breezes push sand, leaves, and salt crust into PGT slider tracks faster than most homeowners expect. A packed lower track causes panel lift-off and compresses the seal, which lets water into the house during a hard summer storm. We remove, clean, and re-align the panel so it sits square again.
- Failed insulated glass units in early PGT vinyl lines – PGT vinyl windows from the late 1990s and early 2000s are now hitting 15 to 20 years old, and we’re seeing internal condensation between the panes on a regular basis. That means the IGU seal has failed. Glass replacement is an option on many of these units, and we’ll tell you when a new frame is the better call.
- Misaligned strike plates and worn locking points on PGT casement and awning windows – Wind-driven racking on older CBS homes in Seminole pulls frames slightly out of square. When a PGT casement won’t lock without forcing the handle, the strike plate is usually the culprit. We re-align, replace worn locking points, and adjust the sash so the mechanism engages without a fight.
- Original jalousie and single-pane slider windows that can’t pass Pinellas County wind-code – This one isn’t a PGT repair; it’s the reason PGT impact windows are so common here. Seminole’s 1960s and 1970s ranch homes were built with extruded-aluminum jalousie and awning windows that fail current wind-load codes. We do full-frame tear-outs and install PGT WinGuard and 7700 series impact units that clear inspection the first time.
PGT Service in Seminole: What Local Conditions Mean for Your Equipment
Here’s a Seminole-specific fact that most window companies won’t tell you: the moment you pull a Pinellas County permit for any renovation, even a kitchen remodel, the inspector will flag your original louvered jalousie windows for wind-code compliance. Seminole’s housing stock is overwhelmingly single-story CBS ranch homes built in the 1960s through 1980s, and many of them still have those original louvered openings on bedroom and bathroom walls. That means a single room renovation often turns into a whole-home PGT impact window swap, and in Seminole it’s not unusual for a job to jump from 3 openings to 12 or more in one shot-similar to what we see with Pgt repair in Largo jobs. We saw exactly this on 102nd Avenue N in east Seminole, where a homeowner’s kitchen remodel permit got flagged and we ended up replacing seven original 1968 jalousie windows with PGT WinGuard single-hungs. The old aluminum sills were so salt-pitted the weep holes had sealed shut, trapping rainwater inside the tracks. We did a full-frame tear-out on every opening, replaced two undersized headers, and the Pinellas County inspection cleared the whole house for wind mitigation. If you’re planning any permitted work in Seminole, plan for this. We’ll help you budget it before the inspector springs it on you.
PGT Models & Products We Service in Seminole
We work on PGT WinGuard aluminum single-hungs and sliding glass doors, the 7700 series impact sliders, vinyl 5500 series windows, and Eze-Breeze vinyl sliding windows. For parts, we use genuine PGT rollers, balances, weatherstripping, and locks whenever they’re available, because matching the original spec matters on impact-rated units. When a part has been discontinued, like hardware on some pre-2000 PGT aluminum frames, we match quality marine-grade aftermarket hardware to the original specs rather than leave you waiting on a backorder. On pre-2000 PGT aluminum frames with corroded sills, we’ll be direct with you: a full-frame replacement costs less over time than chasing one salt-eaten corner after another. We keep common PGT hardware on the truck so most Seminole service calls are finished in a single visit, and we carry the same stock for Pgt repair in Dunedin.
PGT Service Pricing in Seminole
For PGT work in Seminole, here’s what we typically see. A roller replacement on a PGT slider runs $95 to $210 per panel. A lock set replacement runs $85 to $195. Weatherstripping and track re-sealing runs $120 to $290. A failed IGU glass replacement on a PGT window runs $260 to $610. Full-frame PGT impact window replacement starts around $850 to $1,400 per opening, and full-frame PGT impact sliding door replacement starts at $2,800 to $4,800. The biggest cost drivers are frame condition, opening count, and whether we’re doing a full-frame tear-out or an insert replacement. Every free estimate includes a written, line-item price and a walkthrough of what’s actually failing, so there’s no surprise on the bill. Call (754) 238-2201 to schedule yours.
Serving Seminole, FL - Our Local Coverage Area
We’re based in the Seminole area and know this community well, just as we know Pgt repair in Pinellas Park. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Seminole
Because original jalousie windows, the louvered-glass type found on thousands of Seminole bedroom and bathroom walls, don’t meet current Florida wind-load codes. Pinellas County inspectors are required to flag any non-compliant opening the moment a permit is pulled on the property. The practical result is that a small remodel often becomes a full-home PGT impact window replacement. Call (754) 238-2201 before you file the permit and we’ll tell you what’s coming.
Yes, the impact rating on a PGT WinGuard or 7700 series unit doesn’t fade because of salt air, but the hardware and frame surfaces still corrode. Seminole’s 1 to 3 mile distance from the Gulf is close enough that aluminum sills pit within 5 to 7 years if the finish is compromised. Regular cleaning of tracks and weep holes, plus replacing hardware before it seizes, keeps the unit functioning like it should.
In most cases you can replace the insulated glass unit without replacing the frame. That’s true for many PGT 5500 series vinyl windows and some WinGuard units. The frame only needs to come out when it’s structurally compromised, usually from salt pitting that’s eaten through the sill or when the original frame wasn’t set square in the first place. We’ll measure it and tell you straight which one you’re facing.
PGT impact windows and doors can satisfy wind mitigation requirements, but the inspection also considers the roof, roof-to-wall connections, and the overall opening protection system. The PGT units do the heavy lifting on the opening side, but they aren’t a stand-alone guarantee that the whole house passes. We’ve done enough of these in Seminole-and over in Indian Rocks Beach Pgt service-to know what inspectors look for and what needs to be in place before the inspection.
Because you’re 1 to 3 miles from the Gulf, and the salt in the onshore breeze finds its way into the roller bearings and track grooves. Inland Pinellas communities like Largo or Clearwater don’t get the same constant salt load. That’s why we use marine-grade rollers and corrosion-resistant track treatments on PGT sliders in Seminole. It’s a small upgrade that doubles the service life in this air. Call (754) 238-2201 and we’ll quote it from the truck.
Service Areas Near Seminole
We also provide PGT service to homeowners in nearby communities including Madeira Beach, Indian Shores, Redington Shores, Largo, and Clearwater. If you’re near PGT service in Sewall’s Point or PGT service in South Bay, we cover those areas too. Our Seminole service area includes the east-side neighborhoods where jalousie replacements and impact conversions are most common.
Book Your PGT Service in Seminole Today
If your PGT windows or doors are binding, corroding, or failing to lock, call us at (754) 238-2201. A live person answers, 24/7. We’ll schedule your free estimate, measure every opening, and give you a written price before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Seminole and greater Pinellas County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After