Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Davie, FL | TruePane Windows & Doors
We service CWS windows and doors across Davie, and we do it independently - not as a manufacturer-authorized shop. The detail that shapes CWS work here more than anything else is Davie’s position inside Broward County’s High-Velocity Hurricane Zone, where every replacement opening must carry a Miami-Dade Notice of Acceptance. If you own a pre-1992 Davie ranch home with original CWS single-pane aluminum windows, you’re likely sitting on a wind-mitigation inspection failure waiting to surface. Call us at (754) 238-2201 and we’ll tell you straight what needs replacing and what does not.
Why Davie Residents Choose Us for CWS Service
We have worked on CWS sales & service across Broward County for years, and our techs know the model lines the way a mechanic knows a common engine. Dale Kessler grew up in Kendall and trained at Miami Dade College’s vocational program, learning to read a rough opening slowly and without guessing. That matters in Davie because CWS aluminum frames behave differently here than they do three miles east. Our techs measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. We are not the cheapest bid in Davie. We are the last call you should need to make.
We also answer the phone with a live person, every hour of every day. No voicemail tree. No callback form that disappears into someone’s inbox. You call, a human picks up, and we schedule the work.
Common CWS Windows & Doors Problems We Solve in Davie
These are the failure patterns we see repeatedly on CWS units in Davie, tied directly to local conditions here, not generic South Florida wear:
- Bottom weep-corner corrosion on CWS aluminum frames. Davie’s canal-fed humidity and high groundwater keep moisture against frame bottoms even without ocean salt spray. We open corroded weep corners, clean them, and replace the damaged rail sections when the extrusion can be saved.
- UV-hardened and cracked rubber glazing seals. Intense year-round sun on south- and west-facing CWS units hardens glazing rubber within five to eight years. Once the seal cracks, water gets behind the glass bed. We strip the old glazing, re-bed the unit, and use CWS-specific seal kits.
- Fogged insulated glass in CWS Estate Series units. Long-term argon loss and seal failure show up first in unshaded ranch-style openings. A fogged unit cannot be wiped clean from inside, and resealing it is rarely a lasting fix in this climate. We quote the replacement honestly.
- Non-impact CWS single-pane aluminum windows failing wind-mitigation inspections. Pre-1992 Davie homes with original CWS single-pane aluminum windows routinely fail insurance wind-mitigation reviews. These openings are non-compliant with current HVHZ standards and almost always need full replacement.
- Out-of-square CWS slider tracks from settling CBS construction. Concrete block homes settle, and older CWS sliding glass door tracks bind. We re-square the door or replace the roller assembly with CWS-specific parts rather than forcing a homeowner to fight a door every July afternoon.
CWS Service in Davie: What Local Conditions Mean for Your Equipment
The single most useful thing to understand about CWS equipment in Davie is the equestrian zoning issue that does not exist in Plantation or Cooper City. Davie legally permits horses and barn structures on residential lots, and we routinely find accessory building windows and doors that were never wind-rated or permitted at all. When a property sells or an insurance policy renews, Broward County HVHZ inspectors flag these CWS non-compliant openings on outbuildings, and the sale stalls or the policy gets priced up. A homeowner off Shotgun Road in Davie’s western equestrian district learned this the hard way when three original CWS single-pane aluminum windows on a 1980s ranch home failed a wind-mitigation inspection. Our crew performed full frame tear-outs, installed new CWS Estate Series impact windows with Miami-Dade NOA stickers, and the insurance premium dropped 22% within a month. No other CWS-focused page in Broward County explains that connection, because no other company spends this much time in Davie’s barn districts.
CWS Models & Products We Service in Davie
We service and install across the CWS catalog, including the Estate Series impact windows, the 600 Series single-hung and casement lines, the 8000 Series sliding glass doors, and the Architectural Series fixed and picture windows. Our approach on parts is simple: we stock CWS-specific balance systems, sash locks, roller assemblies, and seal kits for older inventory, and we use OEM or certified equivalent impact glazing beads and hardware to keep your NOA compliance intact. We do not cut corners with generic rollers or mismatched hardware, because an impact-rated CWS unit installed with the wrong glazing bead will not pass a Davie inspection. If the frame is corroded, the opening is out of square, or the insulated glass has already failed, we recommend full replacement over patchwork. Patchwork on CWS aluminum in an HVHZ zone rarely satisfies current wind-load codes.
CWS Service Pricing in Davie
CWS service pricing in Davie depends on the model line, the failure, and whether the opening is impact-rated or still original single-pane. A straightforward CWS roller assembly or balance system replacement on a sliding door typically runs between $180 and $340. Rebedding a CWS casement unit with new glazing seals and hardware usually lands in the $275 to $500 range. Full replacement is a different scale, and that is where we sit down with you and write the numbers on paper, manufacturer lines side by side, so you see exactly what you are buying before you commit. Every estimate is free, and every quote includes the warranty registration written out before work begins. Call (754) 238-2201 for an exact quote on your CWS equipment.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Davie
Yes. Davie sits inside Broward County’s High-Velocity Hurricane Zone, and every replacement window or door opening, no exceptions, must carry a current Miami-Dade NOA. We only install CWS products with valid NOA stickers, and we register both warranty layers in writing before we leave your property. Call (754) 238-2201 if your opening currently lacks an NOA sticker and you want to know what replacement will cost.
Because Davie’s canals and high groundwater keep moisture against the bottom rail of the frame for months at a time, even without salt spray. Coastal homes get salt damage, but they also get wind and sun that dry things out. Davie’s low-lying topography means the weep corners stay wet, and that is where the corrosion starts. We replace the corroded rail sections with OEM or certified equivalent aluminum to keep the frame’s NOA rating valid.
Sometimes, but not usually. If the CWS frame is square and the NOA sticker is still valid, we can replace the insulated glass unit. If the frame is corroded, out of square, or was never impact-rated and sits in an opening that now requires compliance, a full replacement is the honest answer, because patchwork glass replacement will not satisfy a Davie HVHZ inspection. Call (754) 238-2201 and we will tell you which category your opening falls in after measuring it.
Yes, in our experience, and the main culprit is the roller assembly binding on settled CBS construction. Concrete block homes shift slightly over decades, and the CWS 8000 Series sliders are sensitive to track alignment. We replace roller assemblies with CWS-specific parts and re-square the door rather than leaving a homeowner fighting a door that sticks every humid August morning.
Likely yes. Accessory building openings in Davie’s equestrian-zoned neighborhoods are frequently unpermitted and non-compliant, and Broward County inspectors flag them during sales and insurance reviews. We pull the needed permits, handle the inspections, and install CWS impact products with valid NOA documentation. Call (754) 238-2201 for a free assessment of your outbuilding openings before your insurance company asks the question.
Service Areas Near Davie
We run CWS service calls throughout western Broward and into neighboring communities. Our Davie service area coverage includes Cooper City, Plantation, Sunrise, Weston, and Southwest Ranches. Homeowners further north can reach us for CWS service in DeBary, and coastal calls come in from CWS service in Deerfield Beach as well. If you are in an equestrian-zoned pocket of Davie, we are likely already working a few streets over.
Book Your CWS Service in Davie Today
If your CWS windows or doors need service in Davie, call (754) 238-2201 for a free estimate. A live person answers, we schedule the appointment, and we show up when we say we will. Measure it right the first time, or plan on coming back, which is why we measure twice and quote on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.