Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Fort Lauderdale, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CWS window and door service across Fort Lauderdale, from Progresso Village to the A1A corridor, and also offers Cws service in Plantation. We’re not a manufacturer affiliate and we’re not an authorized CWS dealer. What we are is a local crew that has spent more than a decade pulling apart CWS frames that have been beaten on by Broward County salt air, and we know exactly where these units fail first on a canal-side wall. Call (754) 238-2201 for a free estimate on any CWS repair, replacement, or wind mitigation question.
Why Fort Lauderdale Residents Choose Us for CWS Service
Dale Kessler founded TruePane in 2008, but he grew up in Kendall watching his father re-glaze storefronts along the Tamiami Trail, and that trade is in how we approach every CWS job we touch. We don’t send out salespeople. The person who measures your rough opening is the same person who will set the new frame and register the warranty paperwork before the truck leaves your driveway. That consistency matters in Fort Lauderdale, where a CWS impact window on a canal-facing exterior is subject to a corrosion profile that has nothing to do with the same model installed three blocks inland. We also bring that same approach to our Cws service in Pompano Beach.
Homeowners here call us because we actually stock the OEM hardware that keeps a CWS impact rating intact. Locking mechanisms, hinge arms, sill drains, roller assemblies. If it matters to the structural integrity of the window, we use CWS factory parts. If it’s a wear item like weatherstripping, we carry marine-grade equivalents that hold up longer against brackish moisture than the original. We also offer a Done Right Promise on every repair, and we register both warranty layers in writing. No arguing. If the pane is not true, the job is not done. For a deeper look at our CWS experience, see our CWS sales & service page.
Common CWS Windows & Doors Problems We Solve in Fort Lauderdale
These are the failure patterns we see most often on CWS products in this city. None of them are generic. Each one traces back to something specific about Fort Lauderdale’s air, water, or building stock.
- Fogged glass on CWS impact casements along canal-facing walls. The internal weep system clogs with fine salt sediment lifted off the water. Condensation can’t drain, the seal fails, and the lower sash edge fogs. We see this on Series 7000 casements within five to seven years when the original install did not account for the home’s specific exposure.
- Corrosion pitting on older CWS Series 5000 aluminum frames. Ocean-facing fixed panels develop pinhole pits at the sill and lower corners. That’s airborne chloride working into raw aluminum where the factory finish was scratched during a previous repair. Left alone, the frame will fail a water test and need full replacement.
- Seized or warped rollers on CWS Series 6000 sliding glass doors. Brackish moisture from the canal network gets into the roller track, and over time the bearings grind themselves down. The door gets harder to slide, then binds entirely. It’s a common call in Edgewood and Croissant Park, where homes sit close to finger canals.
- Glass delamination and interlayer creep on CWS impact glass. Years of reflected UV off the New River and the Intracoastal slowly degrades the laminate. The glass may still look intact from the outside, but the interlayer starts to pull away at the edges. This is a code compliance issue, not a cosmetic one.
- Original jalousie windows that are not CWS and cannot be repaired as a like-for-like replacement. This is the ‘simple repair’ call that turns into a full re-quote once we explain that a 1970s louvered window cannot pass HVHZ permitting and most insurance carriers will not renew the policy with it in place. We walk homeowners through the CWS impact replacement option and handle the paperwork.
CWS Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale has over 165 miles of navigable inland canals. The city’s ‘Venice of America’ layout is not just a postcard detail. It means a CWS window on a canal-side wall gets a different corrosion profile than the same model on the street side of the same house. Atlantic salt is bad enough. Canal salt is finer, more persistent, and it gets carried into places you would not expect, like the internal weep channels of an impact casement or the roller housing of a sliding door. We do not guess at this. Before we recommend a repair or a replacement on any CWS unit, we run a chloride test on the frame surface. The reading tells us whether the aluminum has absorbed enough salt to justify a full rebuild or whether a hardware refresh will hold. That test has saved Fort Lauderdale homeowners thousands of dollars in unnecessary replacements, and it has also caught frames that looked fine from the outside but were on the edge of a total failure. Along the A1A corridor, aging condominiums built in the 1960s and 1970s are now under mandatory milestone inspections following Florida’s post-Surfside legislation. We regularly service CWS windows in those buildings, where original units from initial construction are being pulled and swapped for current impact-rated product. If you’re in one of those buildings, or in an older neighborhood like Progresso Village where CBS homes still carry original CWS single-pane frames, the answer is rarely as simple as a new sash. Fort Lauderdale’s HVHZ code, one of only two such designations in the country, requires a Miami-Dade Notice of Acceptance or Florida Product Approval on every replacement unit. We know which CWS models carry the right approvals and which ones do not, and we’ll show you the paperwork before we order anything. See our Fort Lauderdale service area page for more on how we work across the city.
Last month our crew replaced a CWS Series 5000 impact single-hung in Edgewood after the homeowner reported a fogged lower sash. When we pulled the frame, the internal weep channel was packed with a fine gray-black crust from the nearby canal’s salt spray, and the lower sash roller track had pitted so badly the window no longer closed tight. We installed a new CWS Series 7000 impact single-hung with a full-frame rebuild and a wider bottom track drain. The job passed the city’s HVHZ inspection on the first visit.
CWS Models & Products We Service in Fort Lauderdale
We work on the full CWS impact product line, including the Series 7000 Impact Casement, Series 6000 Impact Sliding Glass Door, Series 5000 Impact Single-Hung, and the Series 9000 Awning and Fixed Picture units. Our parts approach is simple and consistent: structural hardware is OEM CWS, always. Locking mechanisms, hinge arms, and frame components need to be factory parts because an aftermarket equivalent can compromise the impact rating that your HVHZ permit depends on. For non-structural items like rollers, weatherstripping, and drain covers, we carry marine-grade aftermarket equivalents that are built for Fort Lauderdale’s specific conditions and often outlast the original CWS part. We stock the most common replacement components locally so most repairs happen in a single visit.
CWS Service Pricing in Fort Lauderdale
What you pay depends on what we find when we open the frame. A straightforward seal replacement or roller swap runs between $150 and $450 for most CWS units in Fort Lauderdale. If the frame itself has corroded and needs a full replacement, you’re looking at $1,800 to $6,500 for a single opening, depending on the CWS series, the size, and whether we need to re-flash and re-stucco the opening. High-rise condo work is priced separately because it involves different access and safety requirements. Every estimate includes a written line-by-line breakdown, the specific CWS model numbers we’re quoting, and the warranty durations stated on paper before any work begins. We also offer a standing $50 discount on any repair over $250, a maintenance check, and a permanent 5% discount for seniors and veterans. Call (754) 238-2201 and we’ll set up a free estimate, walk you through what the inspection found, and give you a number you can hold us to.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well, and we also provide Hollywood Cws service. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Fort Lauderdale
Fogging on a canal-facing CWS window in Fort Lauderdale is almost always caused by the internal weep system clogging with fine salt sediment, which traps condensation inside the frame and eventually destroys the glass seal. The fix is not another pane of glass. The weep channels need to be cleared, the sash needs resealing, and in many cases the frame needs a wider bottom track drain to handle the continuous salt exposure. Call (754) 238-2201 and we’ll run a chloride test to confirm the cause before quoting anything.
No. Original jalousie windows from the 1970s do not carry a Miami-Dade Notice of Acceptance or Florida Product Approval, and they will not pass a Fort Lauderdale building inspection as a replacement product. Most insurance carriers have stopped renewing policies on homes where these windows remain. We’ll walk you through the full replacement scope and handle the permit paperwork for a compliant CWS impact unit. We also offer Cws service in Coconut Creek.
Sometimes, and only if the frame still passes a water test after cleaning. If the corrosion is localized to the sill or lower corners, we can often repair the frame and install new CWS glass. If the aluminum has pitted through or the frame no longer holds a water-tight seal, a glass-only repair is throwing money away and we’ll tell you that directly. A full frame replacement is usually less expensive than repeated repairs. Call (754) 238-2201 for an honest read on your specific door.
Yes. Fort Lauderdale sits within Broward County’s High-Velocity Hurricane Zone, and every replacement window or door in a condo building, especially along the A1A corridor under mandatory milestone inspections, requires a permit with the appropriate NOA or Florida Product Approval documentation. We pull the permits, coordinate with the building’s engineer of record when required, and schedule inspections so the job closes out cleanly the first time.
On a home near the Intracoastal or the New River, with reflected UV and constant salt exposure, a well-installed CWS impact window should last 15 to 25 years before needing major work. Early failure signs include persistent fogging that won’t clear, visible corrosion at the frame corners, a sliding door that binds, or any delamination at the glass edge. If you’re seeing those signs, call (754) 238-2201. Estimates are free, and we’ll tell you exactly what’s failing and what it will take to fix it.
Service Areas Near Fort Lauderdale
TruePane serves CWS owners throughout Broward County and the surrounding area. We regularly work in neighborhoods like Acacia Villas and the surrounding communities, and we take CWS service calls from Anna Maria, Alafaya, Altamonte Springs, and Apollo Beach when the job calls for it. For CWS work further up the coast, see CWS service in Fort Pierce. For the inland corridor, see CWS service in Glen Ridge.
Book Your CWS Service in Fort Lauderdale Today
If you have a CWS window or door that’s fogged, corroded, binding, or failing a code inspection, call (754) 238-2201. We’ll schedule a free estimate, send a background-checked technician in a TruePane truck, and give you a written quote with real CWS model numbers and real warranty terms. Dale Kessler measures every job himself, because the rule on the whiteboard hasn’t changed since day one: measure it right the first time, or plan on coming back.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.