CWS Windows & Doors in Lantana, FL

CWS Windows & Doors in Lantana, FL | TruePane Windows & Doors

We’re an independent CWS service provider working on CWS windows and doors throughout Lantana, and we’re not factory-affiliated or authorized by the manufacturer. What sets our CWS work apart here is that we understand how Lantana’s salt-air corrosion zone and those 1950s CBS jalousie openings turn a routine window service call into something that requires masonry work, code compliance, and patience. Call (754) 238-2201 for a free estimate on any CWS repair, our Window Installation in Lantana, replacement, or full frame conversion.

Call (754) 238-2201

Our crews work solely on CWS windows and doors across Palm Beach County’s coastal corridor, and we keep detailed field notes on how Lantana’s salt-wind and concrete block construction stress CWS frames, hardware, and installation details. That knowledge comes from doing the work, not from factory training or affiliation. Dale Kessler grew up in Kendall, back when that part of Miami-Dade was mostly nurseries and canal roads, and he spent summers watching his father re-glaze storefronts along the Tamiami Trail. He trained to read a rough opening the way a doctor reads an X-ray, slowly and without guessing, and that’s the standard we bring to every CWS job in Lantana.

If you need CWS sales & service and you live anywhere in the Lantana service area, you’re dealing with a specific set of conditions most window companies never mention until the job is already underway. We mention them before we quote, because knowing what’s behind the stucco changes the price and the timeline.

Why Lantana Residents Choose Us for CWS Service

Most of our customers have lived in their Lantana homes for twenty or thirty years. They know the house, they know the windows, and they know what happens when a contractor promises a one-day job and leaves a hole in the wall at sunset. We don’t do that. Our background-checked, uniformed technicians measure every opening twice, quote CWS manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway.

We’ve served this part of Florida since 2008 through Dale Kessler’s craft tradition, and TruePane was built in 2008 on a simple rule: if the pane is not true, the job is not done. Lantana homeowners call us because we’re still here, still answering the phone with a live person around the clock, and still standing behind every job with our Done Right Promise. No paperwork fights, no arguing, no fine print that covers neither. We also give a permanent 5% discount to seniors and veterans, which matters in a town where so many people have been in the same house since before the sidewalks got redone.

Common CWS Windows & Doors Problems We Solve in Lantana

Here’s what we see most often when we pull up to a Lantana home with CWS windows or doors:

• White corrosion bloom on the bottom weep corners. CWS 800 Series impact casements facing east or southeast catch the onshore salt wind off the Atlantic, and pitting shows up first at the weep corners where moisture collects. We’ll clean, treat, and re-seal the corners when the extrusion is still sound, or tell you straight when it’s time for a full replacement.
• Seized rollers and hardware on horizontal rolling windows. The CWS 600 Series is a solid window, but when the original unit was set into an old jalousie rough opening, salt residue accumulates in the bottom track and stops the rollers dead. We strip the track, replace the hardware with genuine CWS parts, and reset the frame so water drains instead of pooling.
• Fogging between panes on picture windows. CWS 900 Series fixed and picture units on west-facing walls get hammered by Intracoastal-reflected sun, and the glass seal fails early. You’ll see condensation or haze between the panes that won’t wipe off. That’s a seal failure, and it means the insulated glass unit needs replacement, not a cleaning.
• Corroded installation fasteners in CBS openings. This is the one most homeowners never see coming. Original 1950s jalousie-to-impact conversions were sometimes done with standard steel screws, and after years of salt exposure, the fasteners rust through and the frame loosens. We pull the unit, replace every fastener with stainless, and re-anchor the frame properly.
• Failed jalousie-to-impact conversions that were never done right in the first place. We see CWS windows installed into un-bucked CBS openings where the installer shimmed the gap and moved on. The frame shifts, the weep corners fail, and water finds its way into the block. Fixing it requires masonry rework before the window can sit true.

CWS Service in Lantana: What Local Conditions Mean for Your Equipment

Lantana’s entire municipal footprint sits inside the salt-air corrosion zone created by the Intracoastal Waterway running along its eastern edge and the Atlantic Ocean less than a mile beyond. That means virtually every structure in town, not just waterfront properties off South Atlantic Drive or Hypoluxo Road, suffers accelerated deterioration of aluminum frames, hardware, and fasteners. On top of that, the town’s dominant housing stock of 1950s and 1960s CBS homes is still riddled with original jalousie windows that carry zero hurricane rating. So nearly every window replacement job here is simultaneously a corrosion-failure call and a Palm Beach County wind-code compliance upgrade. The jalousie frames were sized and set directly into the masonry without a standard buck, which means a CWS impact replacement almost always requires grinding, cutting, and stucco re-work before the new frame can sit plumb. Our crews schedule that masonry prep as a separate half-day trade step when pulling Lantana permits, because skipping it is how you get a window that looks fine from the street and leaks into the wall for a decade.

CWS Models & Products We Service in Lantana

We work on the full CWS residential line: the 800 Series impact casement, the 600 Series horizontal rolling, the 700 Series awning, and the 900 Series fixed and picture windows. We default to genuine CWS hardware and weatherstripping for anything still in production. For discontinued or salt-corroded legacy parts, we source South Florida marine-grade aluminum replacements that match the original extrusion profile and finish. We stock common CWS replacement hardware, weatherstripping, and stainless fasteners locally so Lantana turnaround doesn’t stall waiting on a truck from Orlando. When frame corrosion has penetrated beyond surface pitting, or when a window still sits below current hurricane-impact code, we recommend our Door Installation in Lantana or full replacement instead of repeated repair. We’re also an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows, so if your CWS window isn’t worth saving, we can quote alternatives side by side on paper.

CWS Service Pricing in Lantana

FAQs - CWS Windows & Doors in Lantana

Service Areas Near Lantana

We cover the coastal corridor and nearby communities, including Acacia Villas, Anna Maria, and Apollo Beach. For customers just north or south, we also provide CWS service in Largo and CWS service in Lauderdale-by-the-Sea. Same crews, same standard, same promise in writing.

Book Your CWS Service in Lantana Today

Measure it right the first time, or plan on coming back. That’s the rule Dale Kessler keeps on the whiteboard, and it governs every CWS job we take in Lantana. Call (754) 238-2201 for a free estimate. A live person answers, around the clock.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lantana since 2008.