Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Lauderdale-by-the-Sea, FL | TruePane Windows & Doors
We service, repair, and replace CWS windows and doors throughout Lauderdale-by-the-Sea, FL as an independent provider, not a manufacturer affiliate. What sets our CWS work apart here is simple: every home in this town sits inside the state-mandated 2,500-foot coastal construction control line, so we approach every CWS opening with HVHZ code in mind from the first measurement. That’s the difference between a repair that passes inspection and one that gets flagged mid-project. Call (754) 238-2201 and we’ll walk you through what your CWS units need. We’ve been doing CWS sales & service long enough to know these frames fail in ways inland Broward shops never see.
Why Lauderdale-by-the-Sea Residents Choose Us for CWS Service
We’re not a franchise operation working off a playbook. Dale Kessler founded TruePane in 2008 after growing up in Kendall and spending summers watching his father re-glaze storefronts along the Tamiami Trail. He trained at Miami Dade College’s vocational program and has been measuring and setting South Florida windows for going on three decades. That means when a CWS single-hung from a 1960s beach cottage on El Prado Drive comes in with pitted aluminum and a seized balance spring, our crew already knows what the wall cavity looks like before we open it. We serve the whole Lauderdale-by-the-Sea service area, from the oceanfront to the Intracoastal, and we stock CWS-compatible marine-grade parts so we’re not waiting on a warehouse in another state. The Keystone Standard applies to every job: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done.
Common CWS Windows & Doors Problems We Solve in Lauderdale-by-the-Sea
- Salt-air pitting on raw aluminum CWS single-hung frames. Oceanfront exposure eats unprotected extrusion fast. We regularly see pinpoint holes at the bottom rail within 10 to 15 years on homes along El Mar Drive and the A1A corridor. This is a marine-air problem, not a manufacturing defect, but it still means water gets into the sill channel and eventually the wall.
- CWS horizontal sliders that grind to a stop. In low-rise condo buildings on the Intracoastal side of Bougainvilla Drive, constant humidity breaks down felt pile weatherstripping. Then salt-crusted sand collects in the track. The sash literally grinds against its own debris.
- Original CWS jalousie windows that can’t be sealed or permitted. These louvered units show up on pre-1980 beach cottages all over town. They cannot hold back wind-driven rain, and Broward County will not pass any permit with non-compliant jalousies still in place. Full replacement becomes mandatory scope, not optional.
- Cracked vinyl glazing beads on post-1990 CWS casement windows. Afternoon sun along the A1A corridor heats the frames hard, then evening salt air cools them fast. The thermal cycling age-hardens vinyl beads until they crack at the corners. That lets water into the sill channel and eventually rots the rough opening.
- Stiff cranks and fogged glass on CWS casement and awning units. In small condo buildings, we see crank operators corrode from years of salt spray even when the unit itself still looks serviceable. Fogged glass means the seal has failed, and that’s not something a crank replacement fixes.
CWS Service in Lauderdale-by-the-Sea: What Local Conditions Mean for Your Equipment
Here’s what makes this town different from every other city in Broward County. Lauderdale-by-the-Sea‘s incorporated limits stretch barely six blocks from the Atlantic shoreline to the Intracoastal. There is no inland buffer, no block of homes that escapes the salt. Every single property, from the oceanfront El Prado to the Intracoastal side of Bougainvilla Drive, falls inside the state-mandated 2,500-foot coastal construction control line. That means a permitted CWS window or door swap triggers a wind-borne debris region review that contractors in Oakland Park or Wilton Manors never face. On top of that, Broward County sits in Florida’s High Velocity Hurricane Zone, one of only two counties in the nation with that designation. All replacement windows and doors must carry Miami-Dade Notice of Acceptance product approvals. For a CWS owner in Lauderdale-by-the-Sea, that reality shapes every decision. A crank repair doesn’t require a permit. A full frame replacement does. An impact-rated conversion does. And if you have original jalousies, the code path is not optional: those units cannot stay under any active permit. We don’t guess about this. We pull permits, pass inspections, and register warranty paperwork before we leave the driveway.
CWS Models & Products We Service in Lauderdale-by-the-Sea
Our CWS coverage spans the lines most common in Lauderdale-by-the-Sea housing. That includes the CWS Aluminum Single-Hung Series original to 1950s and 1960s beach cottages, the CWS Horizontal Slider Series found throughout mid-century condo stock, pre-1980 CWS Jalousie or Louvered Windows, and post-1990 CWS Casement & Awning Series used in small condo replacements. On any of these, we use CWS-compatible marine-grade anodized rollers, stainless steel hinge kits, and HVHZ-rated replacement glass packs sourced from regional suppliers. When the frame itself is compromised, or the job converts jalousies to impact-rated units, we recommend full new CWS or code-compliant impact lines rather than patching 50-year-old extrusions. We measure every opening twice, quote manufacturer lines side by side on paper, and never pad a parts list with aftermarket pieces where an OEM part belongs.
CWS Service Pricing in Lauderdale-by-the-Sea
Most CWS service calls in Lauderdale-by-the-Sea run between $95 and $225 for diagnostic work, while common repairs like roller replacements, weatherstripping renewal, or balance spring swaps typically land in the $180 to $340 range. Salt-air corrosion repairs on single-hung frames run higher because the affected extrusion usually needs to be cleaned, treated, and in some cases section-replaced. A full impact-rated frame conversion, including a Broward County permit and Miami-Dade NOA-approved glass, starts around $1,100 per opening and goes up from there depending on the rough opening condition. What drives the final number: whether the frame is salvageable, whether jalousies or non-impact glazing are involved, how much salt corrosion has reached the wall cavity, and what the permit review requires. Every estimate is free and written line by line, with no change orders hiding in the fine print. Call (754) 238-2201 and we’ll put the numbers on paper for you.
Serving Lauderdale-by-the-Sea, FL - Our Local Coverage Area
We’re based in the Lauderdale-by-the-Sea area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Lauderdale-by-the-Sea
No. Here’s the honest truth: if your Lauderdale-by-the-Sea home still has original CWS jalousie windows, any permitted work on that structure will trigger a Broward County code review, and pre-1980 louvered windows cannot be retained under current HVHZ requirements. You can replace clips and screens as a stopgap, but the moment a permit is pulled, those jalousies become mandatory replacement items. We’ll tell you this before you spend a dollar on clips. Call (754) 238-2201 and we’ll explain your options.
It’s the marine air, not the ocean view. Lauderdale-by-the-Sea is barely six blocks wide, so there’s no meaningful difference between oceanfront and Intracoastal exposure. Salt spray and humidity travel on every breeze, and the Intracoastal itself is salt water. We see identical aluminum pitting on CWS slider frames along Bougainvilla Drive as we do on El Mar Drive. The fix is marine-grade hardware and proper sealing on any replacement parts. Call (754) 238-2201 for a free quote on what your door actually needs.
Fogged glass means the sealed unit has failed. No amount of crank work or gasket replacement un-fogs a failed seal. The stiff crank is a separate issue, usually corrosion in the operator mechanism or a worn hinge. In Lauderdale-by-the-Sea’s marine air, both problems often show up at once. We can replace the sealed glass pack and the operator mechanism without replacing the entire frame, as long as the frame itself is not corroded through. We’ll inspect the opening and tell you exactly what’s salvageable. Call (754) 238-2201 for an estimate.
Yes. Lauderdale-by-the-Sea requires a building permit for any window or door replacement that changes the frame or changes the glazing to impact-rated product. Because the entire town sits inside the coastal construction control line, the permit review includes a wind-borne debris region check and Miami-Dade NOA verification on the new unit. We handle the permit, the inspection, and the paperwork. You should not attempt this as an unpermitted swap; it will surface during a wind mitigation inspection, a refinance, or a sale. Call (754) 238-2201 and we’ll walk you through the process.
Modern impact-rated CWS single-hung units have visible frame profiles that differ from the original 1960s aluminum extrusions. We can’t make a new impact window look exactly like a non-impact original. What we can do is select the slimmest frame profile CWS offers in the model line, match the muntin or grid pattern if the original had one, and set the new unit in a way that preserves the opening rhythm of the house. On a 1962 beach cottage, the result looks intentional, not like a forced upgrade. We’ll bring samples and line drawings before you commit. Call (754) 238-2201 to see the options in person.
Service Areas Near Lauderdale-by-the-Sea
TruePane Windows & Doors serves the full Lauderdale-by-the-Sea service area and the surrounding Broward County communities. If you’re a CWS owner in CWS service in Lauderdale Lakes or CWS service in Lauderhill, we handle those markets too. We also take CWS calls from Fort Lauderdale, Pompano Beach, and Wilton Manors. The same crew, the same Keystone Standard, and the same straight answer on whether a frame is worth saving.
Book Your CWS Service in Lauderdale-by-the-Sea Today
We measure every opening twice, quote manufacturer lines side by side, and register both warranty layers in writing before the truck leaves your driveway. Whether you need a hardware swap on a salt-pitted CWS slider or a full impact-rated frame conversion under a Broward County permit, call (754) 238-2201 to schedule a free estimate. Measure it right the first time, or plan on coming back.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lauderdale-by-the-Sea since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.