Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in South Palm Beach, FL | TruePane Windows & Doors
CWS specialists provide independent window and door service across South Palm Beach condominiums, from swapping fogged glazing on a Series 6000 casement to full-frame impact retrofits that clear the condo board and the county inspector. TruePane Windows & Doors is not a CWS authorized dealer, and we do not pretend to be. The one thing that makes our CWS work different here is that we arrive knowing both sides of your building corrode at nearly the same rate, because South Palm Beach sits on a strip of sand so narrow the Atlantic and the Intracoastal both work on your frames. Call (754) 238-2201 for a straight answer and a free estimate.
Why South Palm Beach Residents Choose Us for CWS Service
We opened our doors in 2008, but the habit of reading a CWS frame the way a mechanic reads an engine goes back further than that. Dale Kessler, our owner, grew up in Kendall when that part of Miami-Dade was still nurseries and canal roads, and he spent summers watching his father re-glaze storefronts along the Tamiami Trail. He learned to read a rough opening slowly and without guessing, and he still measures every job himself. Measure it right the first time, or plan on coming back.
For South Palm Beach specifically, we know the CWS legacy aluminum lines from the 1960s through the 1980s, the ones most of these buildings still carry. We service the newer Series 6000 and Series 8000 lines too. Background-checked, uniformed technicians show up when we say they will, and they quote manufacturer lines side by side on paper so you see exactly what you are buying. We register both manufacturer warranty layers in writing before the truck leaves the driveway. That is our Keystone Standard, and it applies to every CWS job we take in this town.
Common CWS Windows & Doors Problems We Solve in South Palm Beach
The failures we see on CWS equipment in South Palm Beach are specific to this barrier island. Here is what walks through the door most often:
- Corroded aluminum frame corners and sill pans. Dual-sided salt spray from the Atlantic and the Intracoastal eats aluminum from both directions. On many of these older CWS frames, the bottom corner has turned to white powder. We cut out the rot, install marine-grade replacements, and re-anchor the frame.
- Failed glazing seals and fogged glass. High UV and constant salt haze shorten seal life on barrier island high-rises. When the seal fails, moisture works in and the glass fogs permanently. We replace the insulated glass unit and restore the sightline.
- Warped or seized sliding door tracks. Salt accumulates in weep holes and bottom channels, then binds the rollers. We have pulled rollers out of CWS tracks on this island that looked like they had been dipped in brine. If the track is too far gone, full-frame replacement is the honest answer.
- Original 1960s-1980s CWS single-pane units that fail current code. These predate Florida’s impact-glazing mandates. A permitted replacement in Palm Beach County’s Wind-Borne Debris Region requires impact-rated glass and frames. Repair is rarely the code-compliant path.
- Condensation between panes on south-facing elevations. The humidity here never quits, and CWS units on the south and southwest exposures take the worst of it. If you see water inside the glass, the seal is gone, not the weather.
CWS Service in South Palm Beach: What Local Conditions Mean for Your Equipment
Here is the thing about South Palm Beach that still surprises contractors new to this strip. Every our Window Installation in South Palm Beach or door replacement on a condominium here has to clear two gates: the condo association and Palm Beach County’s wind-borne debris requirements. Most crews expect that. What they do not expect is that Intracoastal-facing, west-side sliding door tracks corrode almost as severely as the oceanfront units. The island is that narrow. There is virtually no salt-air buffer on either exposure. Our crews routinely find both sides of the same unit in need of full hardware and frame replacement at the same time. If you own a CWS slider facing the Intracoastal off South Ocean Boulevard, and your neighbor on the Atlantic side is replacing tracks, odds are high your own tracks are not far behind. The salt does not pick a favorite side.
CWS Models & Products We Service in South Palm Beach
We service the full CWS range you are likely to find in these buildings. That includes the CWS Series 6000 Impact Casement, the CWS Series 8000 Horizontal Slider, the CWS Series 500 Storm Door, and the CWS Legacy Aluminum Awning units original to 1960s through 1980s construction. For critical structural components like hinges and locking mechanisms, we source genuine CWS hardware where it is still available. For obsolete legacy frames, we fit precision-matched aftermarket marine-grade parts that hold up to this salt environment. We evaluate structural integrity before recommending repair versus replacement. On this island, most original CWS units are beyond cost-effective repair for impact compliance, and we will tell you that plainly before you spend a dollar. Our full CWS sales and service work covers everything from single-unit glazing to whole-building retrofits.
CWS Service Pricing in South Palm Beach
CWS repair pricing runs on a fairly predictable scale. A fogged or failed insulated glass unit typically runs $180 to $450 depending on size and whether the unit is impact-rated. Sliding door track and roller replacement usually lands between $220 and $420. Hardware rebuilds, new hinges, locks, and balance systems, run $120 to $300 per window. Full-frame CWS impact replacement runs $900 to $2,400 per opening, and that is where South Palm Beach condos usually land once the condo board and the county wind-load specs are factored in. A free estimate means we come out, measure, and hand you a written line-item quote. Fixed pricing, no change orders later. Call (754) 238-2201 for the exact number on your unit.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in South Palm Beach
Yes. South Palm Beach sits entirely within Palm Beach County’s Wind-Borne Debris Region, so any permitted window or door replacement must meet current impact-rated code, and nearly every condo building on this barrier island requires board sign-off before work starts. We prepare the wind-load calculation package and handle the board submittal for you. Call (754) 238-2201 and we will walk you through the sequence before anything gets ordered.
Because the island is roughly a quarter-mile wide in places, so the Intracoastal side gets nearly the same salt-laden air as the Atlantic side. There is no buffer. We see west-facing CWS tracks pitted and seized nearly as often as oceanfront ones, which is why we always inspect both exposures on the same visit.
In most cases, no. Original CWS single-pane aluminum from the 1960s through 1980s does not meet current wind-borne debris impact requirements, and a repair does not change that. We will evaluate the frame honestly. If replacement is the only code-compliant path, we will show you the manufacturer line options on paper and help you pick the right impact-rated CWS unit. Call (754) 238-2201 for a straight assessment.
Expect paperwork, and expect it to take longer than the install. Most South Palm Beach condo boards require a submitted wind-load package, product specifications, and sometimes a sample or site walk before they sign. We prepare that package and handle the submittal, then schedule the work once the board and the county permit are both in hand. Our recent job on South Ocean Boulevard took three board reviews before approval, mostly over exterior finish matching.
Yes. We fit marine-grade stainless hardware on every CWS repair and replacement in South Palm Beach, especially on tracks, hinges, and locking mechanisms. Standard zinc or coated steel hardware does not survive this salt environment. It is a small cost difference today and a large one three years from now if you skip it.
Service Areas Near South Palm Beach
We run CWS service from South Palm Beach down to CWS service in South Pasadena and across to CWS service in Southwest Ranches. Our full South Palm Beach service area covers the surrounding barrier island and mainland communities, including Lake Worth Beach, Lantana, Manalapan, and Palm Beach.
Book Your CWS Service in South Palm Beach Today
Call (754) 238-2201 and a live person answers, day or night. We will schedule your free estimate, measure every opening twice, and hand you a written quote. Then we stand behind the work, in writing, for the life of the job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After