Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Windows & Doors in Edgewood, FL | TruePane Windows & Doors
We provide independent ES Windows service across Edgewood, from seal repairs on ES-7000 casements to full-frame ES-9000 Impact Series replacements. What makes our ES Windows work different here is simple: we know which frame lines will actually pass City of Edgewood wind-load rules on mid-century ranch openings, and which repairs are money down a hole before a permit is ever pulled. If you have ES Windows windows or doors acting up in Edgewood, call (754) 238-2201 and we will tell you straight what you are dealing with.
Why Edgewood Residents Choose Us for ES Windows Service
Most window outfits in the Orlando area treat ES Windows like a side note. We do not. We have rebuilt and retrofitted ES Windows on more mid-century Central Florida ranch homes than any independent shop in the Edgewood market, and we carry the engineering letters and Orange County inspection records to prove code compliance on every job without ever claiming factory authorization. We are an independent ES Windows service provider, not a manufacturer arm. That independence matters because we give Edgewood homeowners honest answers about whether a repair is worth doing or whether the opening needs a full-frame impact replacement. Dale Kessler, our owner, trained at Miami Dade College’s vocational program and has been setting and servicing windows in Florida for going on three decades. He still measures every ES Windows job himself.
Our technicians live and work in this market. They know what a 1963 ranch on a dead-end street off Edgewater Drive looks like behind the drywall, because they have opened enough of them. They know which ES Windows hardware holds up to Central Florida humidity and which gaskets go stiff after five summers. When you call us for Edgewood ES Windows service, the person who shows up understands both the brand and the block.
Common ES Windows Windows & Doors Problems We Solve in Edgewood
- Seal failure and argon fogging in ES-7000 casement sashes. Edgewood’s daily UV load on south and west exposures cooks the insulated glass units faster than almost anywhere in the county. When the seal goes, you see hazy fog or mineral streaking between the panes. That is not condensation you can wipe off. It is a failed unit, and the fix is new glass or a new sash, not a sealant smear.
- Aluminum frame pitting and white oxide bloom at weep holes. Edgewood’s prolonged high humidity, plus moisture drift off Lake Conway on west and north exposures, attacks raw aluminum at the weep holes first. You will see chalky white residue and tiny pits along the bottom rail. Left alone, the pitting works through the frame and compromises the corner welds.
- Thermal bowing in ES-3200 sliding glass door tracks. Homes built in the 1960s here were often framed with rough openings that were never squared. When heat builds on a long south-facing slider, the track bows and the door binds mid-run. Replacing rollers alone will not fix a bowed track. The opening has to be corrected or the frame reset.
- Threshold rot under ES-5000 patio door frames. Many Edgewood ranch homes had patio doors flashed directly to 1950s slab edges with no sill pan. Water wicks up into the bottom rail and rots the subfloor before you ever see it from inside. By the time the door drags on the threshold, the damage underneath is usually bigger than the door itself.
- Jalousie windows in rear Florida rooms that cannot be repaired to code. This is the Edgewood classic. Original jalousie windows from the 1950s and 1960s cannot be made to meet current Florida Building Code wind-load specs in any cost-effective way. You cannot just re-glaze them and call it done. The whole opening needs a compliant replacement unit and a City of Edgewood permit.
ES Windows Service in Edgewood: What Local Conditions Mean for Your Equipment
Edgewood is an independent municipality with its own building permit office separate from Orange County. That is the fact that changes everything for ES Windows work here. Every ES Windows replacement must carry a City of Edgewood permit in addition to Florida Building Code review, and that two-step approval is something many Orlando-area contractors skip until a stop-work order appears on the door. We have seen it happen. A homeowner hires a crew out of Orlando, the crew swaps the windows, and then the city flags the job because no Edgewood permit was pulled. The homeowner is left holding an unpermitted install and the bill to fix it.
For ES Windows owners in Edgewood, this means two things. First, any quote you get should name the City of Edgewood permit as a line item. If it does not, the contractor has not done the homework. Second, the permit process is not a formality. The city reviews wind-load calculations against the specific ES Windows frame line and the specific opening. Some ES series pass; some original mid-century rough openings will not accept an insert and need full-frame bucking. We run those numbers before we ever schedule the truck.
ES Windows Models & Products We Service in Edgewood
We service the full ES Windows line that shows up in Edgewood homes: ES-7000 Series casement and awning aluminum, ES-3200 Series sliding glass doors, ES-5000 Series single hung, and ES-9000 Impact Series fixed picture windows. We use factory-correct ES Windows hardware when it is available. For discontinued series from the 1960s through 1990s, we spec equally rated aftermarket balances, rollers, and gaskets that meet Florida Building Code design pressures. We stock common ES Windows rollers, balances, and gaskets locally so most Edgewood service calls do not wait on a parts truck from out of state. And we tell clients honestly when a mid-century opening is better served by full-frame impact replacement than a parts-only repair. That conversation happens on the first visit, not after the second failure.
ES Windows Service Pricing in Edgewood
What you pay for ES Windows service in Edgewood depends on the specific failure and whether the opening needs a repair or a replacement. A roller replacement on an ES-3200 slider runs differently than a full-frame ES-9000 impact replacement with a City of Edgewood permit. We do not quote over the phone without seeing the opening, because we have been burned by openings that looked simple and were not. A free estimate from us means one of our technicians measures the rough opening, checks the track and frame condition, and gives you a written line-item price. Both warranty layers get registered in writing before the truck leaves the driveway. Call (754) 238-2201 for an exact quote on your ES Windows work in Edgewood. Estimates are free.
Serving Edgewood, FL - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Edgewood
Because Edgewood is an independent municipality with its own building permit office, and any window or door replacement within city limits must be reviewed by that office in addition to Florida Building Code review. The city enforces this. We pull the Edgewood permit on every ES Windows replacement we do here, and the permit is a line item on your written quote. If a contractor tells you the county permit covers it, they are wrong about Edgewood, and the stop-work order will be your problem. Call (754) 238-2201 and we will walk you through the exact permitting path for your street.
No, not to code. Jalousie windows from the 1960s cannot meet current Florida Building Code wind-load requirements in any cost-effective way, and Edgewood’s building office will not sign off on a re-glaze as a wind-resistance fix. We have pulled original 1958 jalousie windows from a rear Florida room off Edgewater Drive where the homeowner wanted a simple reglaze, and the opening ended up needing two ES-9000 Impact Series fixed units with full-frame bucking and a City of Edgewood permit. That is the honest answer: plan for a compliant replacement, not a repair. Call (754) 238-2201 for a free assessment of your openings.
Because the west side of an Edgewood home takes the full afternoon UV load, and that daily heat cycling is what kills the insulated glass seal in an ES-7000 casement. The east side gets morning sun, which is gentler, so those units last longer. Fog between the panes means the seal has failed and the argon has leaked out. The fix is replacement of the insulated glass unit or the sash. We see this pattern constantly in Edgewood, and we can replace the failed sash without touching the rest of the window. Call (754) 238-2201 and we will match the replacement to your existing frame finish.
An insert replacement sets a new window unit inside the existing frame, which saves trim and time but only works when the original frame and rough opening are square and sound. A full-frame replacement removes the old frame down to the rough opening, corrects any bowing or rot, and sets a new unit with proper flashing. In 1960s Edgewood ranch homes, the rough opening is often out of square or the original frame has pitting and rot, which means an insert will bind or leak. We measure the opening and tell you which approach will actually hold up. Call (754) 238-2201 for a line-by-line comparison on your home.
It depends on whether the track is bowing or just dirty. Rain followed by sticking usually means the track has swelled or shifted with moisture, and on a 1960s Edgewood opening that was never squared, that leads to thermal bowing as the aluminum heats and cools. Rollers alone will not fix a bowed track. A technician needs to check the rough opening, the track, and the frame corners before we can tell you if it is a roller job or a reset. Do not force the door; you will chew up the rollers and score the track. Call (754) 238-2201 and we will diagnose it on the first visit.
Service Areas Near Edgewood
TruePane Windows & Doors serves Edgewood and the surrounding communities across the Orlando area. We provide ES Windows sales & service throughout the region, including full ES Windows service in ES Windows service in El Portal and ES Windows service in Eustis. If you are in Edgewood, Pine Castle, Belle Isle, Holden Heights, or Conway, our Edgewood service area covers your block, and our techs know the housing stock and the permit paths on every one of those streets. We handle ES Windows repair and replacement across the whole metro, but Edgewood is where the two-step permit process keeps us honest.
Book Your ES Windows Service in Edgewood Today
If you have an ES Windows window or door acting up in Edgewood, do not wait for the next storm to test the seal. Call (754) 238-2201 and we will schedule a free estimate with a technician who knows this city’s permits and this city’s ranch homes. Live person answers the phone, every time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Edgewood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.