Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Windows & Doors in Treasure Island, FL | TruePane Windows & Doors
We provide independent ES Windows service across Treasure Island, and the one thing that separates our work here from anywhere else is this: nearly every repair call on this barrier island turns into a code-compliance conversation. Treasure Island sits entirely inside the Florida Building Code’s Wind-Borne Debris Region, which means even a broken latch on an ES window can trigger a full impact-rated replacement requirement once the permit is pulled. Call (754) 238-2201 and a live person answers, day or night. TruePane Windows & Doors has been setting windows on Pinellas County’s barrier islands for long enough to know the paperwork better than most people know the weather.
Why Treasure Island Residents Choose Us for ES Windows Service
We’re an independent ES Windows service provider, and that independence matters here. We’re not tied to a manufacturer’s script, so when an ES-7000 Series casement on Blind Pass Road has salt pitting that’s eating through the glazing bead, we tell you straight: repair it now, or replace it before the next storm season makes the decision for you. Dale Kessler, our owner, learned to read a rough opening the way a doctor reads an X-ray, slowly and without guessing, and that habit has saved Treasure Island homeowners thousands of dollars in botched retrofit work. We stock original-equivalent ES hardware and marine-rated glazing beads locally, so most service calls wrap up in a single visit.
Common ES Windows Windows & Doors Problems We Solve in Treasure Island
- Salt-spray pitting on ES-7000 Series casement frames. Properties within a block of Gulf Boulevard see raw aluminum faces oxidize at two to three times the rate of inland St. Petersburg. Once pitting goes active, the anodized layer is compromised and patching just buys you a season. We scope replacement before the frame loses structural integrity.
- Failed IG seals on ES-Fixed impact picture windows. The Gulf sun overheats the frame edge on large fixed units, especially on west-facing condos along Sunset Beach. Once the seal fails, argon leaks out and condensation creeps between the panes. The glass is done, no matter how many times you wipe it.
- Mullion joint separation on wide ES-8000 Series sliders. Salt-laden expansion and contraction cycles work on mullion joints year after year. When the joint separates, the window loses its impact rating and leaks air. We re-engineer the mullion anchor, we don’t caulk over it and call it done.
- Hardware binding in ES-Lift & Slide doors. Steel roller components corrode despite the anodized track covers, especially on ground-floor units where salt spray comes straight off the Gulf. A door that binds in July is a door telling you the rollers are nearly gone.
- Original jalousie windows that can’t be repaired into compliance. This is the Treasure Island classic. The 1950s and 1960s beach cottages across Isle of Palms and Paradise Island still carry original jalousie units, and those cannot be patched or repaired to meet Wind-Borne Debris Region standards. Every single one of those calls ends in a full ES impact-rated replacement.
ES Windows Service in Treasure Island: What Local Conditions Mean for Your Equipment
Treasure Island sits on a narrow Gulf-facing barrier island with zero inland buffer. There is no point on this island more than a few hundred yards from salt water. That places every ES window frame, every sill, every piece of steel hardware in direct, year-round salt spray. We see ES-7000 Series casements on Paradise Island Boulevard that look fifteen years older than the same units installed in inland Seminole. The salt here does not just sit on the surface, it works its way into the glazing beads and the mullion anchors, and once raw aluminum starts showing white powder at the frame edges, you’re past the point of a hardware swap. We treat every ES service call on Treasure Island as a wind-load question first and a repair second, because the building department does the same. If the pane is not true, the job is not done, and on this island, true means code-true.
ES Windows Models & Products We Service in Treasure Island
We service the full ES Windows marine-rated aluminum line, including the ES-7000 Series Aluminum Casement, ES-Lift & Slide Aluminum Door, ES-Fixed Impact Picture Window, and ES-8000 Series Aluminum Sliding Door. Our parts approach is simple: original-equivalent ES hardware and glazing whenever a repair makes economic sense, and a straight answer when it doesn’t. On Treasure Island, once aluminum framing shows active pitting or failed IG units, a full impact-rated ES replacement usually outlasts any patch job by decades. We stock the specific finish and hardware retrofit inventory this salt environment demands, so we’re not waiting on a freight truck from a distributor in Tampa while your opening sits exposed. Call (754) 238-2201 and we’ll get you scoped the same week.
ES Windows Service Pricing in Treasure Island
Here’s the honest math for Treasure Island. Hardware-only repairs on an ES window, things like a corroded roller or a failed latch, typically run $180 to $340 per window depending on the hardware set. A failed IG seal on an ES-Fixed picture window usually comes in between $400 and $900 for the replacement sash or reglaze. Full impact-rated ES-7000 Series casement replacements start around $1,100 per opening and climb based on size, engineering requirements, and finish. What we always do, on every job, is write a line-item quote on paper before any work starts, with both manufacturer warranty layers registered in writing. The price we quote is the price you pay. Call (754) 238-2201 to schedule a free estimate, and we’ll measure every opening twice before we talk dollars.
Serving Treasure Island, FL - Our Local Coverage Area
We’re based in the Treasure Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Treasure Island
Yes, in most cases it does. When you’re replacing original jalousie windows in a pre-1980 Treasure Island beach cottage with modern ES impact-rated frames, the rough opening is often narrower than the new frame requires. That triggers a no-mullion engineering letter to prove the installation meets current wind-load standards. We handle that letter for you, it’s part of how we scope the job. Call (754) 238-2201 and we’ll walk you through what your specific opening will require.
Zero inland buffer. Treasure Island is a barrier island, and every property sits close enough to the Gulf that salt spray reaches the entire structure year-round. The airborne salt oxidizes raw aluminum faces at two to three times the inland rate, and that oxidation becomes active pitting once the anodized finish is scratched or worn. Inland St. Petersburg properties just don’t see that same constant exposure.
Depends on what the rollers and track look like when we open the door up. If the steel roller components are corroded but the aluminum frame is still sound, a hardware swap makes sense. If the track cover is compromised and the frame itself shows pitting at the corners, you’re looking at a replacement. We’ll tell you which one you’re facing after we inspect it. Call (754) 238-2201 for an exact answer, the estimate is free.
No. Once a property sits inside the Wind-Borne Debris Region and the Coastal Construction Control Line, jalousie windows cannot be repaired into compliance. The building department will not sign off on a patched jalousie, no matter how well the work is done. Every jalousie service call on Treasure Island converts to a full ES impact-rated replacement, and we scope that immediately so you’re not left with an open permit.
It depends on the condition of the unit and whether the NOA documentation is still current and legible. The NOA sticker proves the product was approved when it left the factory, but the wind mitigation inspector also looks at the installation. If the anchoring is original and the frame shows salt damage, the report may flag it. We review the paperwork and the install before you schedule the inspection, so there are no surprises. Call (754) 238-2201 and we’ll check it out.
Service Areas Near Treasure Island
We also provide ES Windows sales & service across the wider Pinellas County coast and inland. Homeowners in Anna Maria, Acacia Villas, and Alafaya call us for the same salt-tested ES hardware and the same straight answers we give on Treasure Island service area calls. If you’re east of the Intracoastal in Altamonte Springs or Altoona, or down the coast near ES Windows service in Umatilla and ES Windows service in Vero Beach, our crews cover those routes too.
Book Your ES Windows Service in Treasure Island Today
Call (754) 238-2201 and a live person answers, every time. We’ll schedule a time to inspect your ES windows or doors, measure twice, and hand you a written quote. Free estimates, no pressure, and the work guaranteed for 90 days through our Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Treasure Island and the Pinellas County coast since 2008, with a glazing heritage that goes back years.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After