VLX 80 Casement Window

VLX 80 Casement Window in Miami, FL | TruePane Windows & Doors

The VLX 80 Casement Window is a side-hinged aluminum window built for homeowners in Miami who want two things: an unobstructed view and real ventilation. Its frame profile measures just under two inches wide, which means more glass and less metal. TruePane Windows & Doors is an authorized ViewLux installation partner, so when you buy this window through us in Miami, you get the product exactly as engineered plus an installation performed to AAMA 2400/2410 standards. Call (754) 238-2201 to schedule a free measurement and get a written quote for your project.

Call (754) 238-2201

Product Overview - VLX 80 Casement Window

The VLX 80 Casement Window is a side-hinged aluminum casement with ultra-narrow sightlines and maximum ventilation. That combination is harder to achieve than it sounds. Aluminum is strong, which lets the frame stay thin, but thin frames usually mean less air sealing surface. ViewLux solved that with a 0.079-inch wall thickness on the profile. The frame holds its shape under load without bulking up, so the glass area stays generous and the sash seals tightly against the weatherstripping.

Architecturally, this window suits modern homes in neighborhoods like Coral Gables, Coconut Grove, and Brickell, where clean lines and floor-to-ceiling glass are common. But it also works well in mid-century Miami houses that originally had jalousie or awning windows. The casement style opens outward on side hinges, giving you a full-opening vent unlike a slider or picture window. When you crank it open, the entire sash swings away from the frame, so air moves through the full opening, not just half of it. For a Miami climate where cross-breeze matters every month of the year, that’s a practical advantage, not just a style choice.

The hinge system is rated for repeated use, and the hardware is recessed into the frame so it doesn’t interrupt the sightline. That matters if you’re installing a row of casements along a wall facing Biscayne Bay or a pool deck. You want the view, not the hardware, to be what you notice.

Technical Specifications

Here are the numbers that matter for builders, architects, and homeowners comparing this product line. The profile and wall dimensions below are what give the VLX 80 its structural stiffness without visual bulk.

• Profile width: 1.97 inches, measured across the face of the frame
• Wall thickness: 0.079 inches on the aluminum extrusion
• Operation: Side-hinged casement, outward opening
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Thermal performance: Thermal break technology included, NFRC-rated
• Installation standard: AAMA 2400/2410 compliant

Impact-resistant laminated glass is available for Miami-Dade and Broward wind-load requirements. That option matters if you’re replacing windows in a home built before the current Florida Building Code’s impact standards took effect.

Performance Features

This is where the VLX 80 earns its price. Each feature below is tied to a specific performance standard or engineering choice, not marketing language.

Thermal Efficiency
The frame includes a thermal break, which interrupts the aluminum’s natural heat conductivity. Aluminum otherwise transfers Miami heat straight through the frame. The NFRC-rated assembly keeps the inside face of the frame closer to your indoor temperature, reducing condensation and AC load in summer.

Acoustic Performance
The 0.079-inch wall thickness plus a tight sash-to-frame seal reduces outside noise. If you live near US-1, the Metrorail line, or a busy corridor like Calle Ocho, laminated glass is the upgrade to specify. It damps sound noticeably more than standard clear glass.

Airtightness & Weather Seal
The casement design compresses weatherstripping around all four sides of the sash when closed. That’s different from a slider, which depends on brush seals. The result is a lower air-infiltration rate, which means less humid outdoor air leaking into your home during Miami’s summer months.

Waterproofing
At the installation level, TruePane Windows & Doors applies AAMA 812 low-expansion foam sealant to the full perimeter of every joint. This seals the gap between the window frame and the rough opening. Without it, wind-driven rain finds its way inside the wall cavity, and you won’t see the damage until years later.

Wind Resistance
Miami sits in a high-velocity hurricane zone. The VLX 80 is wind-load rated for local climate requirements, and with laminated impact glass it meets the code provisions for wind-borne debris zones. The multi-point locking mechanism keeps the sash pressed against the seal under high wind pressure, not just latched at one point.

Security & Hardware
The multi-point lock engages at several points along the sash when you close the handle. Compare that to a single latch on many older Miami windows. The crank mechanism also makes it harder to force the window open from outside than a slider with a pop-out lock.

Color & Glass Options

The VLX 80 Casement Window comes in six finishes.

Premium Black is the most common request from architects doing modern Miami homes. It creates a strong frame around the glass and matches black interior hardware. Pure White suits renovated 1950s and 1960s homes in neighborhoods like Shenandoah and Miami Shores where white trim is standard. Anodized Silver reads as metallic and industrial, a good match for concrete and stucco exteriors. Bronze works on wood-heavy or Mediterranean-style homes, blending with darker trim without going fully black.

Champagne is a warm metallic that suits homes with gold or brass fixtures. Teak Wood recreates the look of wood without the maintenance, which matters in Miami’s humidity and rain where real wood frames swell and need repainting every few years.

On glass, Clear is the budget baseline. Frosted is the choice for bathrooms or windows facing a neighbor’s wall. Low-E is what we recommend for any west or south facing window in Miami; it cuts solar heat gain without darkening the glass. Tempered is required by code for windows near doors and low to the floor. Laminated adds impact resistance and sound damping, and it’s the option needed for hurricane protection in most of Miami-Dade County.

For screens, the fixed screen is always in place on the interior side. The retractable screen rolls out of sight when the window is closed, which keeps the clean look of the window itself. For the sill, the low-profile option reduces the step-over height at the bottom of the frame, which helps if you’re using the casement as an egress window or pairing it with a sliding door.

Installation by TruePane Windows & Doors in Miami

A window performs as well as its installation allows. The VLX 80 comes from ViewLux with tight tolerances, but if the rough opening is out of square, the sash binds and the seals don’t align. If the perimeter isn’t sealed, water moves behind the stucco and rots the framing. Manufacturer warranties cover product defects, not installation failures. An improperly installed window voids the warranty.

Our Miami installation crew follows the AAMA 2400/2410 standard on every VLX 80 job. That starts with a pre-install inspection of the rough opening. We check the opening size against the window’s specified dimensions, inspect the framing for rot or termite damage, and measure for square. Then we set the window level and plumb using shims placed to support the frame at the correct points, not just wedged anywhere they fit.

After the window is set, we seal the full perimeter with AAMA 812 low-expansion foam. This is not a cosmetic step. In Miami’s humidity and rain, an unsealed perimeter allows air and moisture into the wall system. The foam fills the gap completely and stays flexible through the thermal expansion cycles that aluminum goes through in the Miami sun.

We finish with a water test on the exterior, verify the sash opens and closes smoothly, and walk the interior and exterior with you before calling the job complete. If you’re replacing windows in a condo or HOA building in Miami, we also coordinate access and follow association rules for scheduling.

Call (754) 238-2201 to schedule a free on-site measurement and get a written line-item quote for your VLX 80 Casement Window project in Miami.

Frequently Asked Questions - VLX 80 Casement Window

What is the lead time for the VLX 80 Casement Window?
Lead time is typically 3 to 6 weeks depending on the glass package, finish, and whether the window is a stock or custom size. Custom finishes and laminated impact glass add time. TruePane Windows & Doors confirms the lead time in writing when we submit your order, and the date we schedule your Miami installation is only confirmed after the windows have arrived and been inspected. Call (754) 238-2201 for current lead times on the configuration you want.

Does the VLX 80 qualify for energy tax credits?
Possibly. The Low-E glass option with the NFRC-rated thermal break can meet Energy Star requirements for the Southern climate zone, which is what matters in Florida. We can’t guarantee a tax credit because eligibility depends on the specific glass configuration and the year’s federal program rules, but we can provide the NFRC documentation for your configuration so you or your accountant can check. Call (754) 238-2201 and ask us about Low-E glass specs for your Miami project.

What warranty comes with the VLX 80 Casement Window?
ViewLux provides a manufacturer warranty on the frame, hardware, and glass, and TruePane Windows & Doors backs the installation with our own workmanship warranty. The exact warranty terms depend on the product configuration and the date of purchase. What matters in Miami is that the warranty stays valid only if the window is installed correctly per the manufacturer’s instructions and AAMA standards. We install to those standards on every job, so your warranty remains intact. Call (754) 238-2201 if you want the warranty specifics for your configuration.

Can I customize the size of the VLX 80 Casement Window?
Yes. The VLX 80 is manufactured to order, so TruePane Windows & Doors can specify custom widths and heights within the product’s structural limits. We measure every opening in your Miami home and order each window to fit its specific rough opening. That means no oversized gaps to fill and no cutting into stucco to force a stock size into place. Call (754) 238-2201 to book a free measurement and get exact pricing for your custom sizes.

How do I maintain aluminum casement window frames in Miami?
Aluminum frames require little maintenance, but Miami’s salt air and humidity mean you should rinse the frames and tracks every few months with water to remove salt residue and debris. Wipe the weatherstripping with a damp cloth, and lubricate the crank mechanism and hinges with a silicone-based lubricant once or twice a year. Avoid abrasive cleaners on the finish. The powder-coated and anodized finishes on the VLX 80 are designed for coastal exposure, but regular rinsing keeps salt from accumulating on the surface. Call (754) 238-2201 if a specific issue comes up on your windows; we service what we install in Miami.

Get a Quote - VLX 80 Casement Window in Miami

If you’re planning a window replacement in Miami, the VLX 80 Casement Window deserves a serious look. TruePane Windows & Doors will measure your openings, walk you through the glass and finish options, and give you a written line-item quote before you commit to anything. Call (754) 238-2201 to schedule your free on-site measurement and start your project.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Miami, FL.