Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 100 Pivot Door in Miami, FL | TruePane Windows & Doors
The VLX 100 Pivot Door is a heavy-duty aluminum pivot door that rotates on a vertical center axis instead of traditional side hinges. It’s built for homeowners and architects in Miami who want oversized glass, clean sightlines, and an entryway that reads as a design statement rather than just a door. TruePane Windows & Doors is an authorized installation partner for which means we sell, size, order, and install this exact system with factory-backed warranty coverage intact. If you’re researching this door for a new build, a remodel, or a replacement, call us at (754) 238-2201 to talk through sizing, glass, and lead times.
Product Overview - VLX 100 Pivot Door
The VLX 100 Pivot Door is what happens when engineering gets out of the way of glass. Instead of hanging the panel on side hinges, the door pivots on a vertical axis set off-center. That single change lets the slab reach up to 60 inches wide and 120 inches tall, with the kind of floor-to-ceiling proportion that turns an entry into the focal point of the home. In Miami, where indoor-outdoor living drives so much of residential design, that matters. You’re not just getting a door. You’re getting a wall of glass that swings.
The frame is extruded aluminum with a wall thickness of 0.098 inches and a profile width of 2.56 inches. That’s a substantially beefier profile than what you’ll find on a typical hinged patio door. The extra aluminum does two things. First, it resists racking and sag over years of daily use in a humid, salt-air climate. Second, it supports the oversized glass without bow or deflection. We’ve installed these in neighborhoods from Coral Gables to Coconut Grove to Bay Harbor Islands, and the panel weight is the reason cheap installation doesn’t work here. The pivot hardware carries the full load. The frame has to be dead level, dead plumb, and dead square, or the door will never close the way it should.
Who buys the VLX 100? Modern and contemporary builds, mostly. Mediterranean-style homes looking for an architectural contrast piece. Townhomes in Brickell and Edgewater where the entry sets the tone before anyone steps inside. Also people replacing a standard front door who want the pivot motion as a feature, not just a function. It’s a statement product, and in the right house it changes how the entire facade feels.
Technical Specifications
Here’s the spec breakdown, in plain terms. These numbers come straight from the ViewLux product data for the VLX 100 system we install here in Miami.
- Frame wall thickness: 0.098 inches. This is the extruded aluminum wall gauge, and it’s a meaningful step up from lightweight residential frames.
- Profile width: 2.56 inches. Slim enough to keep sightlines clean, wide enough to hold the structure and the thermal break.
- Maximum panel span: Up to 60 inches wide by 120 inches tall. If you’re picturing a standard 36-inch front door, this dwarfs it.
- Glass options: Clear, frosted, obscure, Low-E, tempered, and laminated. Mix and match based on privacy, energy, and impact requirements.
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
- Thermal break: Standard on the VLX 100 frame, tested to NFRC energy performance criteria.
- Installation standard: AAMA 2400/2410 compliance, with AAMA 812 low-expansion foam sealant on all perimeter joints.
- Impact option: Laminated impact-rated glass available for Miami-Dade and Broward wind-load requirements.
That last point deserves emphasis. In Miami, a door like this isn’t decorative. It’s part of your wind mitigation system. The frame, the glass, and the anchors all have to work together under hurricane load.
Performance Features
Thermal Efficiency. The VLX 100 frame carries a thermal break between the interior and exterior aluminum faces. That break interrupts conductive heat transfer, so the door doesn’t act like a radiator on a July afternoon in Miami. Choose Low-E glass and you’ll see real movement on your cooling bill.
Acoustic Performance. The 0.098-inch wall thickness and laminated glass option work together to cut exterior noise. If you live near US-1, Biscayne Boulevard, or a flight path into MIA, the sound-control rating makes a noticeable difference. It’s not recording-studio quiet, but it is measurably quieter than a standard hollow-core entry.
Airtightness & Weather Seal. We install every VLX 100 with AAMA 812 low-expansion foam on the full perimeter. That foam seal is what keeps conditioned air in and humid Miami air out. Gaps around a door this size translate directly into energy loss and condensation problems.
Waterproofing. The frame is designed with internal drainage channels, and our AAMA 2400/2410 installation process includes sill sealing and a water test at the end. In Miami’s afternoon downpours and wind-driven rain, a pivot door with a bad sill seal is a slow-motion problem you don’t want.
Wind Resistance. With laminated impact glass, the VLX 100 is wind-load rated for Miami-Dade and Broward requirements. That means the panel, frame, and anchoring survive the design pressure loads your building official’s office asks about during permitting.
Security & Hardware. The pivot hardware itself is substantial, multi-point, and carries the full slab weight. The aluminum frame resists prying far better than wood or vinyl. Laminated glass adds another layer, since it holds together under impact instead of shattering inward.
Color & Glass Options
Premium Black is the most requested finish we order for Miami homes. It reads sharp against white stucco and works beautifully on modern and tropical-modern facades. Pure White tends to go on coastal homes in Key Biscayne and Golden Beach, where a lighter frame keeps the entry from feeling heavy in direct sun. Anodized Silver has a raw aluminum look that pairs well with industrial interiors and loft spaces downtown. Bronze and Champagne are the restrained luxury options, and they show up often in Coral Gables and Pinecrest on homes with warmer stone and wood tones. The Teak Wood finish is a metal finish, not actual wood, but it’s surprising how convincing it looks from ten feet away, and it gives you the warm entry of timber without the maintenance in Miami’s humidity.
Glass is where the door gets personal. Clear glass maximizes the view and the light. Frosted and obscure glass give you privacy while keeping the open feel, popular for entries that face a street or a shared corridor. Low-E is the energy play, rejecting heat without making the glass look dark. Tempered is standard for safety. Laminated is the impact-rated option, and if your door is over a certain size or in a wind-borne debris zone, it’s not optional. We help you match glass to your exposure, your HOA requirements, and your actual comfort level.
Installation by TruePane Windows & Doors in Miami
We’ve been installing high-end door systems in Miami long enough to know one thing: a pivot door is only as good as its rough opening. This isn’t a door you shim into place and call done. The panel is heavy, the tolerances are tight, and the pivot point has to be set exactly right or the door will never operate smoothly.
Our process starts with a pre-install inspection. We measure the rough opening in three places, check the floor for deflection, and confirm the substrate is solid enough to carry the panel load. Then we set the frame level, plumb, and square, using a laser for precision rather than eyeballing it. The frame is mechanically fastened per spec, and all perimeter joints are sealed with AAMA 812 low-expansion foam so the thermal break stays continuous and no air or water gets past the frame.
We install to AAMA 2400/2410 standards. That’s the professional installation reference for aluminum fenestration, and it matters in Miami specifically because building inspectors here actually check. Our work passes inspection the first time, which matters when a remodel is running on a timeline and a failed inspection costs you days.
After the panel is hung, we adjust the pivot hardware until the door swings smooth and stops where it should. Then we run a water test on the sill and threshold zone, clean up, and walk you through operation and maintenance.
A word on warranty: ViewLux covers the product, but only if installation is done correctly. A door installed out of square, or sealed with the wrong product, or shimmed badly, is a warranty claim waiting to be denied. That’s a real risk with general laborers or a handyman. This is one door where the installer’s skill is the difference between a 20-year door and a two-year headache.
Frequently Asked Questions - VLX 100 Pivot Door
Lead time is typically 8 to 12 weeks from order to delivery at our Miami facility, depending on glass type and finish. Laminated impact glass and less common finishes like Champagne can push toward the longer end. Call (754) 238-2201 and we’ll give you a current production timeline before you commit.
It can, as long as the glass package meets the current federal efficiency criteria for exterior doors. The Low-E glass option is the one that generally qualifies, but the final determination depends on your specific glass spec and the tax year. Your tax professional can confirm eligibility.
ViewLux provides a manufacturer’s warranty on the frame, finish, glass, and hardware components, and TruePane Windows & Doors stands behind the installation with our own workmanship warranty. The manufacturer coverage requires professional installation per AAMA standards, which is exactly how we install every unit. We’ll provide the full warranty terms in writing with your quote.
Yes, within the system’s structural limits. The VLX 100 can reach up to 60 inches wide and 120 inches tall, and we can order intermediate sizes in precise increments to fit your opening. Not every width-to-height combination is available, so we verify every order with ViewLux engineering before it goes to production.
Wash the frame with mild soap and water every few months, rinse thoroughly, and keep the bottom track and drain channels clear of sand and debris. Near the beach, a freshwater rinse every month prevents salt buildup from dulling the finish. The hardware pivots should be checked and lubricated annually, which our team can do as part of a service visit.
Get a Quote - VLX 100 Pivot Door in Miami
If you’re seriously considering the VLX 100 Pivot Door, the next step is an on-site measurement in Miami. We’ll confirm sizing, walk you through glass and finish options that suit your home, and give you a written, itemized quote with no surprises. Call TruePane Windows & Doors at (754) 238-2201 to schedule your free measurement and project estimate.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Miami, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
