Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom Windows & Doors for Miami Homeowners
Custom Windows & Doors in Miami are rarely a cosmetic choice. They are a structural answer to salt air, hurricane season, and openings that were never square to begin with. TruePane Windows & Doors has been setting custom units in Miami homes since 2008, and we still measure every opening twice before we order a single frame. When you call (754) 238-2201, a live person answers, and we can usually have a technician at your door the same week, sometimes the same day.
We are led by Dale Kessler, a second-generation glazier who founded TruePane in 2008 on a rule that still hangs in the shop: if the pane is not true, the job is not done. That applies whether we are replacing a fogged bedroom window or building a full curtain wall system on a waterfront home. You get both manufacturer warranty layers registered in writing, durations stated, before our truck leaves the driveway. No paperwork fights, no fine print. That is our Keystone Standard, and it sits inside a Done Right Promise on every job.
What Our Custom Windows & Doors Service Includes
Custom work means the opening dictates the unit, not the other way around. Most of the homes we see in Miami were built decades ago with standard sizes that do not match what is actually in the wall. We build to the opening. Here is what that covers.
Custom Shape Windows
Half-rounds, eyebrow arches, trapezoids, octagons, and triangular gable windows. You need a custom shape window when a standard rectangle will not follow the roofline or a builder originally framed something unusual. We template the exact opening and order a unit cut to that shape, then set it with the same flashing and sealing discipline we use on a full wall of impact glass.
Commercial Storefront Glazing
Storefront glazing is what you see in Miami strip malls and corner shops, and it fails quietly until a door binds or a panel fogs. We replace storefront glass and aluminum framing for small commercial clients who need the work done after business hours or on weekends. The same Keystone Standard applies: both warranty layers registered in writing, and a Done Right Promise on our workmanship.
Curtain Wall Systems
A curtain wall is a non-structural glass wall, usually on a condo or a large custom home, hung from the building frame rather than set into it. These systems leak when drainage channels clog or the gaskets age, and Miami humidity will find every failed seal. We service and replace curtain wall panels, and we re-level and re-seal the framing where needed. This is not a one-truck one-day job, but we schedule it plainly and stand behind it when it is done.
Architectural Grilles & SDLs
Grilles and SDLs, or simulated divided lites, give a window the look of individual panes without sacrificing energy performance. We order them from the manufacturer to match your existing sightlines, whether that means a flat grid inside the glass or a true divided lite with exterior bars. Getting the spacing and bar width right is the difference between a window that looks intentional and one that looks like an afterthought.
Oversized Glass Panels
Oversized glass panels are common in Miami living rooms and second-story renovations where the view is the whole point. A panel over eight feet tall or six feet wide needs thicker glass, heavier framing, and a lift plan to set it safely. We have the equipment and the crew for it. We also check the deflection on the framing before we order, because an oversized panel in a wall that moves will crack at the seal line within a few seasons.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom Windows & Doors
We are an authorized installer for PGT and CGI, which matters in Miami because both brands dominate the impact-rated market here. Our team has set hundreds of PGT WinGuard and CGI Sentinel units. We know their flange systems, their weight, and how they react to a salt-spray exposure that never really stops.
We also service Ply Gem and CWS units, along with more than a dozen other manufacturer lines. Our technicians are trained on OEM installation methods for each brand, not a one-size-fits-all approach. If your existing windows or doors are custom Ply Gem units or CWS storefront, we can source factory parts and keep the manufacturer warranty intact. And if you have a different make entirely, we can still help. We quote manufacturer lines side by side on paper so you see exactly what you are buying before you sign anything.
Signs You Need Custom Windows & Doors Right Now
- Fog between the panes. A failed seal means the insulating gas is gone and the glass will never self-clear. In Miami, where humidity sits high most of the year, that fog turns to permanent mineral spotting inside the unit. Replacement is the only fix, and it usually means a custom size if the home is older.
- A door that binds in July. Wood and aluminum both move in Miami heat and humidity. A door that sticks now and swings freely in January is telling you the frame or slab is no longer true. Shaving the edge is a temporary patch. The right fix is a properly set door that accounts for the swell season.
- Water staining on the interior sill or drywall. That stain means water is already past the exterior seal and traveling inward. By the time you see discoloration, the flashing or the jamb seal has been failing for a while. Miami rain will keep finding that path until the opening is re-built correctly.
- Visible daylight around the frame. Hold a flashlight inside at night and walk the perimeter. If you see light, you are also feeling air movement, and the window is no longer doing its job. That gap is where mold starts, where energy bills climb, and where insects find their way in.
- Cracks in the glass or a sagging sash. A cracked pane in a custom window is never a simple swap. The sash is built to hold a specific glass weight and thickness. A sagging or crooked sash means the frame is torquing, and the replacement needs to be ordered to the actual measured opening, not the old order sheet.
Our Custom Windows & Doors Process - Step by Step
- 1
Measure and template. Every TruePane job starts with two measurements of the same opening, taken by the technician who will run the install. We check both diagonal corners because in a house that has settled for thirty years, the top and bottom of the opening are rarely the same width. We also note any structural movement that could affect the new unit.
- 2
Quote on paper, side by side. Your estimate shows each manufacturer line we recommend, the glass type, the frame material, and the warranty durations for both the glass and the frame. We put it in writing so you can compare. No verbal price, no surprise line items later.
- 3
Order and verify. We order the unit to the opening, not the opening to the unit. When it arrives, we verify the dimensions against the original template before we schedule install. If the manufacturer makes a cutting error, we send it back. We do not trim your framing to fit a wrong unit.
- 4
Install and register warranties. Our uniformed, background-checked technicians set the frame, flash it properly for Miami wind-driven rain, and check the reveal on all four sides. Before the truck leaves, we register both manufacturer warranty layers in writing and hand you the documentation. That is the Keystone Standard, and it is not optional.
- 5
Ninety-day check. We come back and verify the seal and the operation. If anything is not done right, the Done Right Promise means we make it right. Not a phone tree, not a callback form. Dale Kessler’s cell phone number is on the paperwork.
How Much Does Custom Windows & Doors Cost in Miami?
An Affordable Custom Windows & Doors in Miami, FL shaped window typically runs $900-$2,400 installed, depending on the shape complexity and whether you need impact-rated glass. A custom door replacement usually lands between $1,800 and $4,500. Architectural grilles and SDLs add $150-$400 per unit depending on bar width and pattern. Oversized glass panels start around $3,000 and can exceed $12,000 on a curtain wall section with structural reinforcement.
What moves the price in Miami specifically: the wind zone rating required for your block, the age of the framing being replaced, the floor height, and whether the local building department requires impact glazing or just a specific U-factor. We show you the actual cost in the free estimate, line by line, including permit fees when they apply. The way to avoid overpaying is to get the quote on paper and compare the warranty durations, not just the bottom number. A cheaper unit that carries a five-year seal warranty will cost you again in six.
Custom Windows & Doors Near Miami - Our Service Area
TruePane serves Miami and the surrounding communities across the region. We regularly work in Aventura, where condo associations want curtain wall service with a paper trail they can present to the board. We also serve Custom Windows & Doors in Anna Maria on the Gulf side, Custom Windows & Doors in Acacia Villas across the county, and Custom Windows & Doors in Alafaya for homeowners on that side of the metro. Our team covers the full area, and we schedule in plain language. You will know when we are coming, and we will be there when we say.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well, including Custom Windows & Doors - Miami Beach. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom Windows & Doors in Miami
A custom window or door is built to the exact measurements and shape of the opening in your home, rather than a stock size squeezed into the space. It includes shaped glass, specialty frame configurations, and non-standard dimensions. In Miami, custom usually means an older home with openings that no longer match anything on a manufacturer’s standard price sheet.
Most custom units take three to six weeks from template to install, depending on the manufacturer and whether the glass needs impact certification. Simple shaped units often arrive in three to four weeks. Oversized or laminated glass can take longer, and we tell you the lead time in writing before you commit. Call (754) 238-2201 and we will give you a realistic date range, not a vague promise.
A typical custom window in Miami runs $900-$2,400 installed, with impact glass and complex shapes pushing the number higher. The free estimate breaks down the unit cost, labor, and any permit fees in writing. We never give a quote that changes once the work starts unless we find rot or structural damage that requires a change order you approve first.
Yes. We are an authorized installer for PGT and CGI, and we have set hundreds of their impact-rated units across Miami. Our technicians know the flange systems and the weight tolerances on those lines specifically. We also service Ply Gem and CWS custom units, and we can source OEM parts for most of the brands installed in this region.
A live person answers our phone 24 hours a day, 7 days a week. If you have a broken pane or a door that will not secure, call (754) 238-2201 and we will tell you honestly when we can get someone there. We do not use a voicemail tree or a callback form. For any opening that has been compromised, we will walk you through a safe short-term fix and schedule the real repair.
Your units carry two manufacturer warranty layers: one on the glass, one on the frame. We register both in writing before we leave the driveway, with durations stated. On top of that, our Done Right Promise covers our workmanship. If it is not done right in the first ninety days, we make it right. No arguing.
Clear the area around the opening on both sides, inside and out, and move any furniture within about eight feet. If you have a security system sensor on the existing unit, flag it for our tech so we can work around it. We bring drop cloths and our own cleanup gear. We will tell you what else is needed during the estimate, in writing.
Schedule Your Custom Windows & Doors Service in Miami Today
Call (754) 238-2201 for a free, no-obligation estimate on the Best Custom Windows & Doors in Miami, FL. A live person answers. We will measure, quote on paper, and register your warranties in writing before we leave the driveway. That is a square deal, and we stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.