Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Windows & Doors in Mount Dora, FL | TruePane Windows & Doors
We service, restore, and replace Andersen windows and doors across Mount Dora, including the Historic Preservation District where most contractors won’t touch a job without help. We’re an independent Andersen service provider, not manufacturer-affiliated or authorized, and that independence means we can tell you plainly when an aftermarket part will outlast the original in lakefront humidity. Call (754) 238-2201 for a free estimate. We’ve worked on Andersen units in Mount Dora for over a decade, and we know which models pass Historic Preservation Board review the first time.
Why Mount Dora Residents Choose Us for Andersen Service
Most window companies in Lake County know Andersen as a brand name. We know Andersen as a set of specific model lines, each with its own failure patterns and repair paths. Dale Kessler, our owner, grew up watching his father re-glaze storefronts along the Tamiami Trail, and he trained at Miami Dade College’s vocational program learning to read a rough opening the way a doctor reads an X-ray, slowly and without guessing. That training shows up on every job we do in Mount Dora, especially when a 400 Series Tilt-Wash double-hung in a 1920s bungalow needs rot repair around the sash corners while the Historic Preservation Board wants the original divided-light pattern preserved. We stock genuine Andersen weatherstripping, balances, and locks for fast turnaround, and we install marine-grade flashing on lakeside jobs where OEM pans corrode early. For the full picture of our brand work, see our Andersen sales & service page. We’re background-checked, uniformed, and we register both warranty layers in writing before the truck leaves your driveway.
Common Andersen Windows & Doors Problems We Solve in Mount Dora
Andersen makes a good window. Mount Dora’s climate makes a hard test of any window. Here’s what we see most often:
- Seal failure in High-Performance Low-E4 insulated glass units on lake-facing elevations. The combination of afternoon UV, Lake Dora humidity, and daily thermal cycling kills IGU seals in 8-10 years on lakeside homes versus the typical 15-plus. We replace the glass, not the whole sash, whenever the frame is sound.
- Wood jamb rot at sash corners on 400 Series Tilt-Wash windows in historic frame homes. Many original Andersen units in Mount Dora’s 1890s-1930s housing stock were installed without proper flashing. Add persistent lake-generated humidity, and the corners go soft. We cut out the rot, treat the remaining wood, and install aftermarket stainless steel sill pans that outlast the originals.
- Corrosion and pitting on Perma-Shield aluminum cladding near the Lake Dora shoreline. Airborne moisture works its way under the cladding edge and starts eating the metal from the inside. We recommend marine-grade replacement cladding on any water-facing elevation.
- Hardware binding and worn balance systems on 400 Series double-hungs in 1950s-1970s concrete-block ranch homes around Mount Dora. Decades of thermal cycling around Louden Avenue and the surrounding grid stretch the balance springs past tolerance. We replace balances with genuine Andersen factory parts and re-hang the sash to spec.
- Condensation failure inside surviving jalousie and louvered openings being converted to Andersen 100 Series single-hung replacements. The old aluminum frames sweat in hard freezes. The new units need proper insulation and flashing at the rough opening, or you trade one problem for another.
Andersen Service in Mount Dora: What Local Conditions Mean for Your Equipment
Here’s the part no national brand page will tell you. Mount Dora is the only city in Lake County with a designated Historic Preservation District that mandates original window profiles, material appearance, and divided-light patterns for contributing structures. That means every Andersen replacement on a Victorian, Queen Anne, or Craftsman bungalow near the downtown core requires pre-installation approval from the Historic Preservation Board. Contractors in Eustis and Tavares never face this layer. We do, and we’ve learned which Andersen 400 Series and A-Series configurations pass review without revisions: full-frame replacements with custom divided lights that match the original muntin width, wood or wood-clad exteriors rather than vinyl, and finish colors that read as period-appropriate. If you own a contributing structure off Donnelly Street or anywhere inside the historic core, start your project with a contractor who knows the board’s expectations. We’ll be there when we say, and we’ll have the paperwork ready.
Andersen Models & Products We Service in Mount Dora
Our crews work on the full range of Andersen lines found in Mount Dora homes:
- 400 Series Tilt-Wash Double-Hung - the most common Andersen unit in our area, heavily represented in both the historic wood-frame homes and the mid-century ranch blocks.
- A-Series casement and awning - the line we most often recommend for Historic Preservation Board replacements because of its wood interior, true divided-light options, and custom finish flexibility.
- 100 Series single-hung - our standard recommendation for ranch-home jalousie conversions where budget matters but code compliance and energy performance are non-negotiable.
- Perma-Shield Narroline gliding windows - still common in 1970s Mount Dora homes, and still serviceable with genuine Andersen parts for balances, rollers, and weatherstripping.
We use genuine Andersen factory parts for all weatherstripping, balances, and locks. On lakeside jobs we install aftermarket stainless steel sill pans and marine-grade flashing because the OEM pans corrode early in shoreline air. We only recommend full replacement when rot has reached the structural frame. Otherwise we restore the original sash and reglaze with Low-E4 glass. That’s the honest repair-or-replace calculus we apply on every estimate in Mount Dora.
Andersen Service Pricing in Mount Dora
What should you expect to pay for Andersen service in Mount Dora? Here’s a straight answer:
- IGU seal replacement on a 400 Series double-hung: $180-$340 per sash, depending on glass size and whether Low-E4 coating is required.
- Wood jamb rot repair at sash corners: $240-$475 per opening, including treatment and aftermarket sill pan installation.
- Full-frame A-Series replacement on a historic contributing structure: $1,400-$2,800 per opening, including divided-light matching and Historic Preservation Board documentation.
- Perma-Shield cladding replacement on a lake-facing elevation: $310-$560 per unit, marine-grade.
- Balance and hardware replacement on a 400 Series double-hung: $120-$260 per window, genuine Andersen parts.
For the fastest route to an exact number, call (754) 238-2201 and we’ll come measure. Estimates are free, written line by line, and we’ll quote manufacturer lines side by side on paper so you see exactly what you’re buying.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Mount Dora
Yes, if you choose the right model and configuration. Andersen A-Series windows with wood interiors, true divided lights, and period-appropriate finish colors are the standard we use for contributing structures in Mount Dora’s historic core. The Historic Preservation Board typically requires that replacement windows match the original profile, muntin width, and material appearance. We prepare the documentation and handle the pre-installation approval. Call (754) 238-2201 for a free assessment of your property’s specific requirements.
Because Lake Dora creates a microclimate. The combination of intense afternoon UV, high ambient moisture off the water, and daily thermal cycling stresses insulated glass unit seals far harder than inland exposures do. We see IGU seals on water-facing elevations fail in 8-10 years on lakeside homes versus 15-plus on interior blocks. The fix is a targeted lake-exposure install approach: Low-E4 glass with upgraded sealant and marine-grade flashing. Call (754) 238-2201 and we’ll inspect the elevation that’s failing.
Yes, in most cases. We restore original sashes by removing rot, treating the remaining wood, reglazing with Low-E4 glass, and replacing weatherstripping and balances with genuine Andersen parts. Full replacement is only warranted when rot has reached the structural frame. Last spring our crew restored a 1920s Craftsman bungalow off Donnelly Street this exact way, and the Historic Preservation Board passed it on the first visit. Call (754) 238-2201 for a restoration assessment.
Andersen A-Series and 400 Series impact-rated units meet Florida’s wind zone requirements for inland Lake County, including Mount Dora. The specific product approval depends on your home’s exposure category and the size of the opening. We’ll pull the right product approval documentation for your address and wind zone before installation day. Call (754) 238-2201 for an impact-window estimate.
We do. Perma-Shield Narroline gliding windows are still common in Mount Dora’s 1950s-1970s concrete-block ranch neighborhoods, and we stock genuine Andersen replacement rollers, balances, and weatherstripping for them. If the aluminum cladding is pitting from lake air, we can replace the cladding with marine-grade material without pulling the whole window. Call (754) 238-2201 and we’ll take a look.
Service Areas Near Mount Dora
We serve Mount Dora and the surrounding communities, including Altoona, Eustis, Tavares, and the lakeside neighborhoods around the Harris Chain of Lakes. Our full Mount Dora service area page covers the boundaries. If you’re on the Gulf side, see our Andersen service in New Port Richey page. We also cover Andersen service in North Bay Village for Miami-Dade homeowners.
Book Your Andersen Service in Mount Dora Today
Call (754) 238-2201 for a free estimate on any Andersen repair, restoration, or replacement in Mount Dora. A live person answers. We’ll schedule a time, show up in uniform, measure twice, and give you a written line-item quote before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Mount Dora since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After