Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Door Installation: The Miami Owner’s Guide
If you own a CGI door in Miami and the installation is failing, we can match the exact part, replace it, and stand behind the work. Most CGI door installation jobs we handle run between $350 and $950 installed, depending on the door series, the hardware involved, and whether we’re replacing a single component or rebuilding the entire opening. We stock the most common CGI-compatible installation parts on our trucks, so a live person answers your call at (754) 238-2201 and we’ll tell you straight whether we can handle it in one visit.
Homeowners usually discover a failed CGI door installation the way you’d expect in Miami: a door that scraped fine in January suddenly binds hard in August, or a bottom sweep that lets afternoon rain bleed across the threshold, or a roller that sounds like gravel every time the door moves. Sometimes the door just won’t lock square anymore. That’s when the real question stops being “what’s wrong” and starts being “who actually knows CGI doors well enough to fix it without guessing.”
Key Takeaways:
- We stock CGI-compatible installation parts on the truck and match them to your door’s series and manufacture date.
- Typical installed pricing in Miami runs $350 to $950, with a written line-item quote before we touch anything.
- A live person answers our phone 24/7. No voicemail tree, no callback form.
- Every job gets the Done Right Promise: if it’s not done right, we make it right. No arguing.
Which CGI Models This Applies To
CGI builds several door lines, and the installation parts do not interchange across all of them. We work on the Estate Collection, the Tribute Collection, and the Sentinel series most often in Miami-Dade, but we also see older CGI doors from the pre-2010 builds where the original installation hardware has been discontinued and needs a careful match rather than a guess.
The fastest way to identify what you have is the label. CGI doors carry a certification sticker on the hinge edge or the top of the door panel, and it lists the series, the manufacture date, and the approval number. That sticker is the single most useful thing you can show us when we arrive, because a 2008 Sentinel and a 2019 Sentinel can take different installation hardware. If the sticker is gone, we measure the door slab thickness, the hinge prep, and the frame depth. With CGI doors in particular, we’re watching for the through-bolt hinge pattern on the impact-rated models. Some series use concealed screws behind the weatherstrip, and if you torque those wrong you strip the frame insert and the door will never sit true again.
OEM vs. aftermarket for CGI: For impact-rated doors, we recommend OEM or manufacturer-approved hardware. The warranty language on CGI doors is specific about what voids it, and a mismatched hinge or roller set can do it. For non-impact interior doors, a quality aftermarket equivalent is often fine and costs less. We’ll quote both on paper so you see exactly what you’re buying and why.
One compatibility gotcha we see repeatedly in Miami: CGI’s impact-rated doors are built around a heavy-gauge steel or aluminum frame, and the installation hardware is sized for that frame. A homeowner who grabs a standard residential hinge set from a big-box store ends up with screws that are too short to reach the frame’s structural points. The door sags within a season. We’ve had to redo more than one of those, and it’s always more expensive than doing it right the first time.
We are an independent service provider. We install and service CGI products, but we are not affiliated with CGI or its parent company.
Signs Your CGI Door Installation Is Failing
- The door binds at the top or latch edge in summer. Miami’s heat and humidity swell the door slab, and if the installation was set too tight to begin with, the door starts grabbing. This is almost always an installation-depth or hinge-seat issue, not a door problem.
- Water intrudes at the bottom corner during a heavy rain. The threshold and bottom sweep are the first installation components to fail in Miami weather. We see this most in doors that face south or east, where afternoon storms drive rain horizontally against the door.
- The door won’t latch without lifting or leaning into it. This means the hinge screws are pulling out of the frame, or the frame itself has shifted. On older homes in Shenandoah or Coral Way, the frame can be out of true from decades of settling, and no amount of latch adjustment will hold until the frame is re-shimmed.
- You hear a scraping or grinding when the door opens. That’s usually a failed roller or a hinge that’s lost its lubrication and worn an oblong seat. In coastal areas like Key Biscayne or Miami Beach, salt air accelerates this wear significantly.
- Visible gaps around the weatherstrip. If you can see daylight at the top or latch side, the installation has shifted. On an impact-rated CGI door, that gap also compromises the wind and water rating, which matters in a Miami hurricane season.
Replacement Cost & What’s Included
Here’s the honest breakdown for CGI door installation replacement in Miami:
| Service | Typical Miami Installed Range |
|---|---|
| Full door installation replacement (labor, hardware, materials) | $350 – $950 |
| Hinge set replacement (3 hinges, impact-rated) | $180 – $340 |
| Threshold and weatherstrip replacement | $160 – $300 |
| Frame re-shim and re-set | $250 – $550 |
| Complete opening rebuild (frame, door, hardware) | $800 – $1,900 |
What drives the range: which CGI series you have, whether we’re matching existing hardware or switching to a new spec, and how far out of true the opening has gotten. If the original installation was never shimmed correctly, the labor goes up because we’re correcting someone else’s work before we ever install the new part.
Every quote is written line-by-line, parts and labor separated, before we start. You’ll know the warranty durations on both the manufacturer layer and our workmanship. The Keystone Standard means both warranty layers get registered in writing before the truck leaves your driveway, and the Done Right Promise means if it’s not right, we come back and make it right. That’s the guarantee, in writing, every time.
We’ll be there when we say. Uniformed, background-checked, and prepared for the exact door you described on the phone.
DIY or Call Us?
You can safely check a few things yourself. Look at the label on the hinge edge to confirm your CGI series and manufacture date. See if the hinge screws are tight. Look for daylight around the weatherstrip. That’s diagnostic work, and it helps us quote more accurately when you call.
What we don’t recommend is pulling the door off its hinges and trying to re-set it yourself on an impact-rated frame. These doors are heavy, the frames are unforgiving, and if you get the shim depth wrong, the door will never sit square again without professional correction. We’ve seen homeowners spend an entire Saturday on a door that took us ninety minutes to true up properly. That’s not a knock on anyone’s handiness. It’s just the difference between a door you fix and a door you live with for twenty years.
Dale Kessler has been measuring, sourcing, and setting windows and doors in South Florida for going on three decades. His rule holds: “Measure it right the first time, or plan on coming back.” We’d rather come back for the free estimate than to redo a repair that went sideways.
Call (754) 238-2201 and tell us what your door is doing. A live person answers. We’ll tell you what we think over the phone, and we’ll schedule a time that works for you.
FAQs
In Miami’s heat, humidity, and salt air, a properly installed CGI door and its installation hardware should last fifteen to twenty-five years, with the weatherstrip and threshold needing replacement roughly every five to seven years depending on sun and storm exposure. Doors facing south or east on the water wear faster. Call (754) 238-2201 if your door is under fifteen years old and showing signs of failure, because that usually points to the original installation, not the door itself.
Most often it can be repaired, and that’s where we start unless the frame is too far gone. A hinge set, a threshold, a re-shim, or a weatherstrip replacement fixes the majority of what we see, and we’ll tell you plainly if full replacement is the better use of your money. The estimate is free either way.
Most single-door installation replacements take two to four hours on site, including removing the old hardware, prepping the frame, and setting the new components. A full opening rebuild can take most of a day. We’ll give you a time window when you book, and we’ll be there when we say.
We stock the most common CGI-compatible installation components on our trucks, including impact-rated hinge sets, thresholds, and weatherstrip in the sizes we see most in Miami. If your door needs something specific to an older series, we source it directly and give you a firm lead time before we schedule the work. Call (754) 238-2201 with your label information, and we’ll tell you whether it’s on the truck today.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.