Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Miami: What to Know First
CGI roof replacement and installation in Miami typically runs between $1,200 and $4,800 depending on the series, the number of panels, and whether the frame is salvageable. We’re an independent CGI service provider, not a manufacturer-authorized shop, which means we source OEM parts where they matter and tell you plainly when a quality aftermarket equivalent will do the same job for less. Most CGI panel replacements on a standard single-story Miami home are completed in one to two visits.
This page is written for homeowners in Miami who already own CGI windows or doors and need the roofing components above or around them replaced or reinstalled correctly. If you’ve got a CGI skylight, a CGI roof window, or a CGI sliding glass wall tied into a roof deck, the details here apply to you. Call (754) 238-2201 and a live person will answer, day or night.
How CGI Products Fail - and How We Fix Them
- CGI Estate Collection roof windows lose their thermal seal at the flashing line. We see this on homes within three miles of Biscayne Bay, where salt spray works into the gap between the frame and the roof membrane. The glass doesn’t fail first, the gasket does. By the time condensation shows up between panes, the flashing has already been compromised for a season or two. Our fix is a full re-flash with a marine-grade sealant, not a bead of caulk over the old one. That lasts about eight months here. The proper repair lasts a decade.
- CGI Sentinel series fixed roof glazing develops stress cracks at the corners after hurricanes. The panel itself survives the wind, but the frame twists just enough under pressure to transfer stress into the glass. Homeowners notice a hairline crack running from one corner, usually within six weeks after a storm. The cause is almost always a frame that was shimmed incorrectly at original installation. We re-set the frame, true it with a laser level, and only then install the new panel.
- CGI Estate Collection operable skylights bind at the hinge after three to five Miami summers. Aluminum expands and contracts aggressively in our heat cycle. The hinge pins on this series are steel, and when they corrode even slightly, the panel starts to catch when you open it. If you force it, you crack the frame corner. We replace the hinge assembly with a stainless pin and re-align the panel. The skylight smooths out like new, and it stays that way because we’re using a part that belongs in a coastal climate.
- CGI Targa series impact doors used as roof-deck entries sag at the top rail. This one shows up on newer Miami condos where the door swings outward onto a roof terrace. The top hinge plate on the Targa is robust, but the flashing above it is often the weak point. Water gets behind the header and softens the substrate. The door doesn’t sag because the hinge fails; it sags because what the hinge is mounted into has gone soft. We open the header, replace any rotted wood with pressure-treated stock or composite, and re-hang the door. The door was never the problem. The roof detail was.
- CGI roof glass loses its impact rating when the laminate edge is exposed to standing water. This is the one most homeowners have never heard of. On any CGI laminated glass panel, the edge of the laminate layer is the vulnerable point. If the roof drain clogs and water pools against the bottom rail of a CGI panel for days at a time, the laminate can begin to delaminate at the edge. It’s slow, but it happens. We check drainage on every CGI roof job we touch, because no repair matters if the water has nowhere to go. We’ve spent whole afternoons chasing this exact failure, and we’d rather tell you about it before it costs you a panel.
Our CGI Roof Replacement & Installation Process
- 1
Call and talk to a person. You call (754) 238-2201. A live person answers, asks what you’re seeing, and schedules a time that works for you. No callback forms.
- 2
On-site measurement. A uniformed, background-checked technician arrives and measures the opening twice. Every opening. Dale Kessler still measures his own jobs, and the founding rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done.
- 3
Parts decision, on paper. We show you OEM CGI pricing and the aftermarket equivalent side by side where one exists. You see exactly what you’re buying and what the warranty covers before we order anything.
- 4
The re-installation. We set the frame true, re-flash the penetration, and set the panel with materials rated for Miami’s salt and heat. If the roof membrane is involved, we tie into it properly, not around it.
- 5
Warranty registration before we leave. The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway. Not a promise to do it later.
- 6
We stand behind it. Every CGI roof replacement and installation carries our Done Right Promise. If it’s not done right, we make it right. No paperwork fights, no arguing.
What CGI Roof Replacement & Installation Costs in Miami
Here’s what we tell homeowners to expect in Miami, straight up:
- CGI fixed roof window replacement, standard size: $1,200 to $2,400 installed
- CGI operable skylight re-installation with new hinge hardware: $1,800 to $3,200 installed
- CGI Estate or Sentinel roof panel replacement with full re-flash: $2,200 to $3,800 installed
- CGI Targa door re-set tied into a roof deck with header repair: $2,800 to $4,800 installed
What moves the price: whether the frame is reusable, whether the roof membrane needs to be opened, the series (Estate and Sentinel parts cost more than Targa), and whether we’re working at height on a roof terrace. You get a written line-item quote before any work begins, and the price on that quote is the price you pay. No surprise line items. Call (754) 238-2201 for a free estimate.
Why Miami Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving local communities since 2008 through a heritage of craft and community commitment. Dale Kessler founded this company in 2008 because he kept seeing out-of-true installs and voided warranties that could have been prevented with better measuring and honest paperwork. We’re not the cheapest bid in the room, and we don’t try to be. We’re the last call a homeowner makes.
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems. That matters on a CGI job because it means we can show you side-by-side options when a replacement panel from another line would serve you better than an OEM CGI part at twice the cost. A live person answers our phone 24 hours a day, seven days a week. Background-checked, uniformed technicians on every job. Seniors and veterans receive a permanent 5% discount, and we still stand by the Done Right Promise on every job we touch. When you call, you get a square deal.
FAQs
If the replacement is done by an independent shop using OEM CGI parts and proper installation methods, the manufacturer warranty on the replacement panel remains valid. The original installation warranty is typically already gone once a third party touches the unit, which is the honest answer. We register both warranty layers on the new work in writing before we leave, and our Done Right Promise covers our labor regardless of what CGI’s paperwork says. Call (754) 238-2201 to talk through your specific situation.
In Miami, older CGI Estate and Sentinel panels from the early 2000s are increasingly hard to source through OEM channels. When that’s the case, we’ll show you the closest current production match and an aftermarket equivalent side by side on paper, with honest trade-offs on glass tint, laminate thickness, and warranty terms. We’ve done this enough times to know which replacements pass a picky homeowner’s eye. Call (754) 238-2201 and we’ll walk you through it.
If the glass is intact but the unit leaks, binds, or fogs, repair is usually the right call and costs a third to half of a full replacement. If the laminate edge is delaminating, the frame is twisted beyond re-setting, or the unit is over 20 years old in Miami’s coastal air, replacement is the honest recommendation. We’ll show you the numbers both ways before you decide. Call (754) 238-2201 and we’ll give you a straight answer.
Most CGI roof replacements and installations in Miami are scheduled within three to five business days of your call, and the work itself typically takes one to two visits. If you’ve got an active leak through a roof opening, tell the person who answers the phone, and we’ll prioritize the job. A live person answers 24/7, and we’ll be there when we say. Call (754) 238-2201.
No. You get a written line-item quote before any work begins, and the number on that quote is the number you pay. The only exception is if we open the roof and find structural damage we couldn’t see from the outside, and even then, we stop work and show you what we found before spending another dollar. That’s the square deal we’ve run on for years. Call (754) 238-2201 and we’ll put it in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.