Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Jupiter, FL | TruePane Windows & Doors
We service, repair, and replace CWS windows and doors across Jupiter, Florida, and the one thing that sets our CWS work apart here is that we understand the exact approval paperwork Palm Beach County requires. We’re an independent CWS service provider, which means we’re not beholden to the manufacturer or tied to a dealership route. Call us at (754) 238-2201 for a free estimate, and we’ll walk you through what your CWS unit actually needs before you spend a dime.
Why Jupiter Residents Choose Us for CWS Service
Jupiter is a salt-air market. That’s not a footnote; it’s the whole story. Dale Kessler, our owner, has spent nearly three decades setting and repairing windows and doors in South Florida, and he learned early that what works ten miles inland fails inside three years along the Loxahatchee River. Our crews work on CWS equipment within a mile of Jupiter Inlet and Jupiter Inlet Colony weekly, so we know which CWS models hold up, which ones need marine-grade hardware swapped in, and which Florida Product Approval packages clear Palm Beach County permitting without a second trip. We’re also reachable around the clock, seven days a week, by a live person who can actually dispatch someone. No call service, no voicemail purgatory.
When we take on CWS work in Jupiter, we treat the whole unit, not just the symptom. That means checking the seals, the rollers, the weep holes, and the frame condition while we’re already on-site. If you’re in a 1970s concrete-block home off US-1 with original aluminum sliders, we’re going to be honest with you about whether a patch job is worth the money or whether you’re better served by a full-frame replacement that brings the entire opening up to current wind-mitigation standards. You may not be ready for that answer, but you deserve to hear it.
Common CWS Windows & Doors Problems We Solve in Jupiter
- Salt-pitted slider tracks and seized rollers on CWS 750 Series sliding glass doors. Within three years of install near the Jupiter Inlet or the Intracoastal, standard 304 stainless rollers start pitting. The door gets harder to move until one day it just won’t. We swap in 316 marine-grade hardware and realign the track. If the frame’s gone, we say so.
- Corroded weep-hole covers and lower-corner rot on CWS 750 Series sliders facing east. East-facing elevations in Jupiter take the Atlantic wind and salt spray square on. The weep covers corrode first, then water stops draining, then the sill holds water during every summer downpour. By the time you see the stucco staining at the bottom corner, the frame’s usually compromised.
- Argon fogging on CWS fixed and picture windows on west-facing rear elevations. Homes in Abacoa and other late-1990s developments in Jupiter have a lot of west-facing glass with no shade. After fifteen-plus years in the unshaded afternoon sun, the IGUs lose their argon and the seals let go. You get condensation between the panes that you can’t wipe off. That’s a glass replacement, not a cleaning problem.
- Thermal break failure on pre-2015 CWS aluminum frames. Along the Loxahatchee River and in concrete-block homes near the water, we see interior condensation and mildew forming on the stucco return around the window frame. The aluminum’s thermal break has failed, and the frame is now conducting heat and moisture directly into the conditioned space. Older CWS 650 Series units are the most common offenders in Jupiter.
- Failed impact certification on CWS installations from before Palm Beach County tightened its wind maps. If your CWS windows were installed under an older code cycle, or if the installing contractor used the wrong approval number, your insurance company may not credit the full wind-mitigation benefit. We document what you have and tell you what’s actually required now.
CWS Service in Jupiter: What Local Conditions Mean for Your Equipment
The thing most Jupiter homeowners don’t realize until the inspector rejects a job is this: Jupiter sits inside Palm Beach County’s wind-borne debris region but outside Miami-Dade’s High Velocity Hurricane Zone. That distinction controls every permitted CWS window or door replacement in this city. A CWS unit going into a Jupiter home needs a Florida Product Approval number for Palm Beach County design pressures, not a Miami-Dade NOA. Print the wrong approval on the permit and the inspector will fail the job and hold your final inspection hostage until you get it corrected. We’ve seen it happen enough times that we check the approval number on every CWS unit before we write the estimate. It costs us ten minutes and saves you a week of rework.
That reality also drives our parts decisions. CWS hardware specs often assume a generic Florida coastal environment, but Jupiter’s location at the mouth of the Loxahatchee River, where the river meets the Atlantic at the Jupiter Inlet, is a genuinely aggressive marine environment. Standard 304 stainless steel hardware fails here faster than in most of Palm Beach County. When we service a CWS slider within a mile of the inlet, we recommend 316 marine-grade stainless hardware as baseline, not as an upgrade conversation. That’s not a sales tactic; it’s the difference between a one-time repair and a callback in three years. If the pane is not true, the job is not done, and the same standard applies to a roller that seizes because we put the wrong grade of stainless in it.
Last March we replaced a 2004 CWS 750 Series three-panel slider on a home off Northview Drive in Jupiter Inlet Colony. The original track rollers had seized from salt pitting, and the lower weep-corner had rotted enough that the sill was holding water during every nor’easter. We pulled the entire frame and swapped in a new CWS impact slider with 316 marine-grade hardware and a resin-clad thermal break, then re-stuccoed the opening and had it pass Palm Beach County’s wind-mitigation inspection the same week. That’s the job done right, end to end.
CWS Models & Products We Service in Jupiter
We service the full CWS residential lineup, including the 650 Series impact casement and awning windows, the 750 Series impact sliding glass doors, the 850 Series fixed and picture windows, and the 950 Series hurricane-rated entry doors. For CWS units still under manufacturer warranty, we prioritize OEM seals, rollers, and handle sets when they’re available, because preserving the original Florida Product Approval listing keeps your permitting and insurance paperwork intact. In Jupiter’s marine environment, we frequently specify 316 marine-grade stainless aftermarket hardware instead of OEM 304, because the OEM spec pits too quickly near the inlet. We’re honest about when a repair no longer makes sense. Older CWS units with corroded frames or fogged glass are usually replacement candidates, and we’ll tell you that plainly instead of patching a frame that’s already lost its structural integrity.
CWS Service Pricing in Jupiter
What you’ll pay for CWS service in Jupiter depends on what’s actually wrong. A seized roller replacement on a 750 Series slider might run under $300, while a full impact-rated CWS frame replacement on a three-panel slider can push past $4,000 once you factor in the new unit, demolition, install, stucco work, and the wind-mitigation inspection. Fogged glass replacement on a CWS 850 Series fixed window typically lands in the $300 to $800 range depending on size and whether the IGU is still under warranty. We write line-item estimates up front, on paper, so you see exactly what you’re buying before we start. No change orders appear halfway through the job, and no one shows up with a number that wasn’t already discussed. Call (754) 238-2201, and we’ll put a real number on it, not a vague range. The estimate is free.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Jupiter
You need a Florida Product Approval number for Palm Beach County design pressures. Jupiter is outside Miami-Dade’s High Velocity Hurricane Zone, so a Miami-Dade NOA is not the approval that applies here. If your permit lists the wrong one, a Jupiter inspector will reject it. We verify the approval number on every CWS unit before we file anything. Call (754) 238-2201 and we’ll check yours.
Because Jupiter sits at the mouth of the Loxahatchee River where it meets the Atlantic at the Jupiter Inlet, and the Intracoastal channel pushes concentrated salt spray inland. Homes within a mile of the water are in a true marine environment, one where the salinity and continuous moisture load pit standard 304 stainless hardware far faster than in Wellington or Palm Beach Gardens. CWS factory hardware often ships as 304-grade. In Jupiter, we specify 316 marine-grade replacements as the practical baseline, not an optional upgrade.
In most cases, yes. Fogging between the panes means the insulated glass unit’s seal has failed and the argon has leaked. That’s a glass replacement on a CWS 850 Series or similar fixed window, and it’s usually a one-visit job. What you shouldn’t do is ignore it, because a failed seal is also a failed insulating layer, and in Jupiter’s summer heat that means higher cooling bills on top of the obscured view. Call (754) 238-2201 and we’ll measure it and give you a firm glass price.
We provide the paperwork. After the job passes Palm Beach County inspection, we’ll produce the documentation your insurer needs to credit the wind-mitigation benefit: the Florida Product Approval number for each opening, the permit record, and the final inspection sign-off. We don’t leave the job until that paperwork is in your hands, because the whole point of impact CWS windows in Jupiter is that you pay less when the storm hits. Call (754) 238-2201 if your insurance agent wants verification of existing units.
Generally not. Original aluminum frames from the pre-Andrew era won’t carry a current Florida Product Approval, and they won’t come close to Palm Beach County’s current wind-load requirements. Reusing an old frame means you lose the impact rating, the energy performance, and the insurance credit all at once. We’ll do a full-frame tear-out and install a new CWS impact slider in the same rough opening, and we’ll pull the permit and pass inspection before we call it done. Call (754) 238-2201 for a straight answer on your specific opening.
Service Areas Near Jupiter
Our CWS service area covers Jupiter and the surrounding communities. We handle Jupiter service area calls across the full city, from the US-1 corridor to the inlet. We also serve CWS service in Jupiter Inlet Colony, where the salt-air exposure is at its worst, and CWS service in Jupiter Island, where large oceanfront homes carry some of the most demanding impact requirements in Palm Beach County. If you’re in a neighboring community and aren’t sure we cover it, call (754) 238-2201 and ask. A live person answers, and we’ll tell you straight.
Book Your CWS Service in Jupiter Today
Here’s the order of operations: call (754) 238-2201, tell us what’s happening with your CWS window or door, and we’ll get someone out to look at it. Same-day service is often available. The estimate is free, and the quote is in writing before any work starts. Measure it right the first time, or plan on coming back, and we don’t plan on coming back for the wrong reasons.
We’re CWS sales & service for an independent, no-nonsense installation company, and CWS owners in Jupiter have been calling us for years because we’re the ones who answer the phone and show up. Call TruePane Windows & Doors at (754) 238-2201 and put us to work.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jupiter since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After