CWS Windows & Doors in Sunrise, FL

CWS Windows & Doors in Sunrise, FL | TruePane Windows & Doors

If you own a CWS window or sliding glass door in Sunrise and it’s started to bind, leak, or sag, here’s the short answer: we’re an independent CWS service provider, and we stock the hardware, rollers, balances, and impact sashes that keep these units working in Broward County’s high-velocity hurricane zone. For full replacements, see our Window Installation in Sunrise. The thing that separates our CWS work here from what you’d get from a general handyman is simple: we know which CWS lines fail first in western Broward’s humidity, and we know which parts are worth repairing versus replacing. Call (754) 238-2201 and you’ll reach a live person, not a voicemail tree.

Call (754) 238-2201

We’ve been pulling apart and rebuilding CWS windows and doors across Sunrise for years, from Sunrise Lakes Phase 2 to the 1970s CBS tract homes off Sunset Strip. We are not authorized by CWS and we don’t pretend to be. What we are is a local glass and door company that keeps current on every NOA and Broward County product approval that applies to their product lines. If you need CWS sales & service knowledge without the franchise upsell, you’re in the right place.

Why Sunrise Residents Choose Us for CWS Service

Dale Kessler grew up in Kendall, back when that part of Miami-Dade was still mostly nurseries and canal roads. He spent summers watching his father re-glaze storefronts along the Tamiami Trail before he ever picked up a paycheck, and he trained at Miami Dade College’s vocational program, where he learned to read a rough opening the way a doctor reads an X-ray: slowly and without guessing. That’s the standard our techs carry into every Sunrise home today.

Here’s what that means for your CWS equipment. We measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. We register both warranty layers in writing before the truck leaves your driveway. And we stock genuine CWS hardware locally, so a seized roller or a dead balance spring doesn’t turn into a two-week wait for a part to ship from out of state.

We’re also a company that plans to be in Sunrise in thirty years. We hire local, train apprentices into journeymen, and sponsor county fairs and church roof funds because this is our community too. A background-checked, uniformed technician will show up when we say, work the way they’d work in their own mother’s house, and leave the job done right. That’s the Done Right Promise: if it’s not done right, we make it right. No paperwork, no arguing.

Common CWS Windows & Doors Problems We Solve in Sunrise

These are the five CWS failures we see most often in Sunrise, and each one has a local reason behind it:

• CWS 8900 Series impact sliding glass door rollers seizing. Everglades silt and mildew accumulate in unsealed track corners, especially in homes within a half-mile of the open flatlands west of the city. The panel grinds, then jumps off the rail. We replace rollers with anodized stainless aftermarket units that match the original extrusion.
• CWS 4300 Series single hung balancers losing tension. Ten to twelve years of Sunrise humidity is enough to kill the original balance springs. The lower sash drops hard, and the weatherstripping on the meeting rail gets shredded. We keep balance springs and pivot bars on the truck.
• CWS 7700 Series impact casement hinge corrosion. On homes near the Everglades flatlands, open-fetch wind drives rain directly into the lower hinge. We see visible corrosion there while the upper hinge still looks new. We service and replace those hinges before the sash starts sagging and compromising the seal.
• Original CWS aluminum frames from the 1970s and 80s showing weep-corner rot. In older Sunrise Lakes condo buildings, this is nearly universal. The bottom track collects water, the weep corners corrode, and water finds its way inside. If the frame is still straight, we repair the weep system and re-seal the opening. If it’s bowed or pitted, we tell you honestly.
• Failed weatherstripping and fogged seals. The relentless humidity in western Broward breaks down the original CWS gaskets and sealant faster than owners expect. A fogged double-pane unit isn’t fixable; the glass gets replaced. Worn weatherstripping is a fast, affordable repair.

CWS Service in Sunrise: What Local Conditions Mean for Your Equipment

Here’s something most contractors outside Sunrise don’t deal with at the same scale. The sprawling 55-plus condo community of Sunrise Lakes, with thousands of units across multiple phases, drives consistent building-wide sliding glass door replacement projects. That means a single permit pull covers dozens of identical openings, and the condo association board has to approve every product specification before work starts. Our tech spent three days in Sunrise Lakes Phase 3 replacing eight CWS 8900 series sliding glass doors on a fourth-floor walk-up as part of our Door Installation in Sunrise. Every original door had the same failure: lower rollers seized from silt and mildew, panels jumped the track, weatherstripping shredded. But the frames were straight enough to accept new HVHZ-rated impact sashes. We replaced all rollers with anodized stainless units, installed Miami-Dade NOA-compliant impact glass, and pulled one building-wide permit that covered all eight openings for the condo association.

That layered workflow doesn’t exist at the same scale in the single-family-dominated neighboring cities of Tamarac or Plantation. In Sunrise, it’s the daily reality, and we’ve built our scheduling, permitting, and parts inventory around it. If you’re a condo owner or board member dealing with CWS windows or doors, you want a company that has already navigated this process more than once.

CWS Models & Products We Service in Sunrise

We service the full CWS residential line, including the CWS 4300 Series Single Hung, CWS 7700 Series Impact Casement, CWS 8900 Series Impact Sliding Glass Door, and CWS 3000 Series Awning. For current production models, we stock genuine CWS hardware locally: balance springs, pivot bars, roller assemblies, locking mechanisms, and weatherstripping. For older discontinued CWS lines, which are everywhere in Sunrise‘s 1970s and 80s housing stock, we use machined, anodized aftermarket equivalents that match the original extrusion profile.

We only recommend a full replacement when the frame itself is bowed, pitted, or fails an HVHZ wind-load test. Otherwise, we repair the sash and hardware, re-seal the opening, and buy you years of life at a fraction of replacement cost. That’s a square deal, and it’s the same advice we’d give our own families.

CWS Service Pricing in Sunrise

FAQs - CWS Windows & Doors in Sunrise

Service Areas Near Sunrise

We provide CWS windows and doors service throughout Sunrise and the surrounding Broward communities. That includes Sunrise service area coverage for all neighborhoods, plus CWS service in Surfside and CWS service in Sweetwater for clients whose properties sit closer to the coast or further south. If your home or condo building is in Sunrise, Tamarac, Plantation, or anywhere in between, we’ll be there when we say.

Book Your CWS Service in Sunrise Today

If your CWS window is sagging, your sliding door is grinding, or your impact glass is fogged, call (754) 238-2201. We’ll put a real person on the phone, schedule a free estimate, and show up when we say. Measure it right the first time, or plan on coming back.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.