Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Windows & Doors in Atlantis, FL | TruePane Windows & Doors
We provide independent Window Installation - Atlantis service across the city, and the one thing that makes our work here different is simple: this city runs its own building department, so every ES Windows replacement on a 1960s-1980s home gets a roof-to-sill wind-load review no Palm Beach County inspector would push. That changes the scope, the paperwork, and the glass choices on nearly every job. If you own original ES Windows in Atlantis, call (754) 238-2201 and we’ll walk you through what your house actually needs.
We are TruePane Windows & Doors, led by Dale Kessler, and we have been setting and servicing ES Windows across Palm Beach County’s coastal enclaves for more than four decades. We know the frame extrusions, hinge geometries, and glass makeups of every major ES series because we have taken them apart, put them back together, and watched how they age in this salt-heavy air. You will not get a call center script from us.
Why Atlantis Residents Choose Us for ES Windows Service
Most window companies in this part of Florida treat ES Windows as a line item on a brochure. We treat them as a specific set of extrusions, hardware, and glazing that behaves differently in Atlantis than it does ten miles inland. The salt-laden humidity here, roughly three to four miles from the coast, works on aluminum in ways you do not see in Wellington or Boynton Beach. Operators corrode faster. Anodized finishes bloom white at the sills. Roller tracks catch sand you did not know was in the air.
Dale Kessler grew up in Kendall, back when that stretch of Miami-Dade was mostly nurseries and canal roads, and he learned to read a rough opening from his father before he ever earned a paycheck. He trained at Miami Dade College’s vocational program and has been measuring, sourcing, and setting Door Installation - Atlantis and windows across South Florida for nearly three decades. The work he is best known for is impact-rated installations that pass inspection the first time, including the kind of vintage ES Windows replacements that make Atlantis inspectors take a second look.
We are an independent ES Windows service provider. That means we source genuine ES extrusions and hardware when available, and we are not beholden to a manufacturer’s script or a regional call center. When a legacy ES series is out of production, we use load-tested, code-complying aftermarket components that match the original sightline and weatherstripping profile. You get a straight answer about what your window needs, not a sales pitch for what is easiest to sell.
Common ES Windows Windows & Doors Problems We Solve in Atlantis
These are the failure modes we see most often in Atlantis, and each one ties directly to this city’s climate, housing stock, or building code.
- Corroded casement and awning operators. ES-3000 Series awning and casement windows use a worm-gear pivot that is vulnerable to salt corrosion. In Atlantis, the persistent humidity accelerates that corrosion until the operator strips and the window refuses to open or close tightly. We replace the gear assembly and re-lubricate the track, but if the frame itself is compromised, we tell you that too.
- Single-pane frames flexing at mitered corners. Original ES frames never upgraded to impact glazing flex under wind load, which is a real problem in a city within Florida’s wind-borne debris region. After a few storm cycles, the corners open up and you start getting air and water leaks. We see this all over the city’s 1960s and 1970s ranch homes.
- Sliding door rollers derailing from sand and salt. ES-5000 Series sliding glass doors have roller assemblies that trap wind-blown sand and salt. The lower track spalls, the rollers bind, and eventually the door derails. It is a common call from homes around the Atlantis Country Club loop, where the fairways and roads sit close to the coast.
- White filiform corrosion beneath sills. Hard-anodized finishes on original ES aluminum frames in Atlantis develop a powdery white corrosion hidden until removal. We have pulled frames where the weep-channel metal crumbled when we lifted the unit. That is not a repair situation. That is a full-frame replacement.
- Jalousie windows failing to meet impact code. Many Atlantis homes still have jalousie or louvered glass windows on lanais and Florida rooms. These cannot be retrofitted to meet impact ratings, and any permitted replacement legally requires full framing out and replacement. Homeowners often call expecting a glass repair and learn the scope is much larger than they thought.
ES Windows Service in Atlantis: What Local Conditions Mean for Your Equipment
Here is what sets Atlantis apart from every neighboring city, and it is not the golf course. Atlantis operates its own municipal permitting authority. Most Palm Beach County cities route window replacements through the county building department. Atlantis does not. When we pull a permit for an ES Windows replacement on a home built between the late 1950s and the 1980s, the city’s own desk reviews it. That review includes a roof-to-sill wind-load calculation, and the local inspectors know exactly what is hiding in this city’s walls because they have inspected it for decades.
What that means for you as an ES Windows owner is this: an original jalousie window on your lanai cannot be reglazed and called done. The city will not sign off on it. We have to document the jalousie removal, submit the new impact configuration with engineering letters, and frame the opening for a proper impact-rated ES unit. That is a bigger job than a repair quote, and it is why so many first estimates in Atlantis get reshaped once we open the wall and see what the permit review will require. We do not cut around this. We plan for it from the first measurement.
Measure it right the first time, or plan on coming back.
ES Windows Models & Products We Service in Atlantis
We service every major ES Windows product line you are likely to find in Atlantis, and a few you won’t see in the newer subdivisions.
- ES-3000 Series awning and casement windows. The operators are the weak point here in this climate, and we keep replacement hardware stocked for faster turnaround.
- ES-4000 Series fixed and picture windows. These are common on the golf course view walls throughout Atlantis, and the mitered corners on the original single-pane versions are where the leaks start.
- ES-5000 Series sliding glass doors. The roller assemblies and lower tracks need attention in sandy, salty air, and we keep the replacement components on hand.
- ES-8000 Series impact-rated windows and doors. This is the line we recommend most often for full-frame replacements in Atlantis, given the city’s permit requirements and wind-borne debris zone.
Our parts approach is not complicated. We source genuine ES extrusions and hardware when available, and we tell you when they are not. For legacy series that ES no longer supports, we use load-tested aftermarket components that match the original sightline. We never patch a corroded ES frame to limp toward a failure. If the aluminum loss exceeds 25% of the section, we recommend full-frame replacement, not an insert. That is the honest answer, and it is the one that keeps your windows in code compliance.
ES Windows Service Pricing in Atlantis
What you pay for ES Windows service in Atlantis depends mostly on scope. A straightforward operator replacement on an ES-3000 casement window is a different job than a full-frame ES-8000 impact-rated replacement with city permits and engineering letters.
Repair work, like replacing a roller assembly or a stripped operator, typically starts in the $180 to $340 range depending on the hardware and how much of the frame has to come apart. Full-frame replacements run significantly higher because they involve the permit, the wind-load review, the jalousie removal when applicable, and the new impact-rated glass package. We write line-item quotes on paper so you see exactly what you are paying for before we touch a screw.
Our free estimate includes a full measurement of every opening, a review of the existing ES frames, and a written scope that tells you what the city of Atlantis will require. Call (754) 238-2201 and we will schedule it.
Serving Atlantis, FL - Our Local Coverage Area
We’re based in the Atlantis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Atlantis
The salt-laden humidity in Atlantis, roughly three to four miles from the Atlantic coast, corrodes the worm-gear pivot inside ES-3000 casement and awning operators much faster than you would see in Wellington or Loxahatchee. The corrosion strips the gear teeth, and the window either refuses to move or will not seal tightly at the corners. We replace the operator assembly and re-lubricate the track, and if the frame itself shows corrosion beyond repair, we tell you before you spend money on hardware. Call (754) 238-2201 for an assessment.
No, we are an independent service provider. We are not manufacturer-affiliated, and we do not speak for ES Windows. What we have is direct, daily experience with their product lines across Palm Beach County, including the specific ways their frames and hardware age in a coastal city like Atlantis. For ES Windows sales & service, we give you an independent assessment, not a manufacturer script.
We do when they are available and when they are the right choice for the repair. For in-warranty and structural repairs, we source genuine ES extrusions and hardware. For legacy series that are out of production, we use load-tested, code-complying aftermarket components that match the original sightline and weatherstripping profile. We will always tell you which parts we are using and why.
Most common repairs, like operator replacements or roller track rebuilds, are completed in a single visit. Full-frame replacements take longer because of the Atlantis permitting process, the wind-load review, and the framing work required for the new impact-rated units. We pull the city permit, submit the engineering, and schedule the inspection so you know the timeline before we start.
It depends on the scope. A repair might run $180 to $340. A full-frame ES-8000 impact-rated replacement will cost significantly more, and in Atlantis the city’s own permit desk often forces a bigger scope than a neighboring town would. The jalousie windows common in this city cannot be reglazed and permitted; they must be framed out and replaced. Call (754) 238-2201 for a free estimate with a written line-item quote.
Service Areas Near Atlantis
We serve Atlantis and the surrounding communities. If you are a few minutes away in Atlantis service area neighborhoods or in nearby cities, we can likely help. We also provide ES Windows service in Aventura and ES Windows service in Bal Harbour for clients with multiple properties in South Florida. You can reach us at the same number throughout the county: (754) 238-2201.
Book Your ES Windows Service in Atlantis Today
If you have ES Windows in Atlantis and you have been putting off a repair or a replacement, call (754) 238-2201. We will measure, quote it on paper, and tell you exactly what the city will require. A live person answers the phone.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Atlantis and Palm Beach County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.