PGT Windows & Doors in Hollywood, FL

PGT Windows & Doors in Hollywood, FL | TruePane Windows & Doors

We provide independent PGT window and door service across Hollywood, FL, from Hollywood Lakes to the A1A corridor and the grid west of Federal Highway, and we also offer Fort Lauderdale PGT service just to the north. What makes our PGT work different here is simple: Hollywood sits entirely inside Broward County’s High Velocity Hurricane Zone (HVHZ), so every repair we do has to satisfy the most demanding impact code in the country. We stock PGT-specific hardware and seals, and our techs know how a WinGuard casement fails from salt creep three blocks off the Intracoastal. Call (754) 238-2201 for a straight answer and a free estimate.

Call (754) 238-2201

Why Hollywood Residents Choose Us for PGT Service

We’ve rebuilt enough PGT WinGuard, SpectraGuard, and 5500/7700 units in Hollywood’s salt-and-wind environment to know exactly how they degrade. Not as a sideline. As the core of our trade. Dale Kessler founded TruePane in 2008 after growing up in Kendall watching his father re-glaze storefronts along the Tamiami Trail, and he has been measuring, sourcing, and setting windows and doors in South Florida for going on three decades. His rule is taped to the whiteboard in the shop: measure it right the first time, or plan on coming back.

We are an independent PGT service provider. We are not manufacturer-affiliated and not an authorized PGT dealer. That independence matters because it means we can tell you the truth about whether a corroded rail is worth repairing or whether the door is done. You get the same honest read on PGT that we’d give on Andersen, Pella, Marvin, Milgard, or CGI. We’re PGT sales & service specialists because Hollywood’s housing stock demands it, not because a franchise playbook told us to be.

Common PGT Windows & Doors Problems We Solve in Hollywood

• Salt-air corrosion on PGT impact frames. Within roughly a mile of the Atlantic, Hollywood’s salt air pits aluminum faster than most inland Florida markets. We routinely find PGT 5500 sliders on older coastal condos where the glass is perfectly intact but the frame rails have corroded so badly the hardware has seized. The sash won’t move, or the lock won’t throw. That’s a Hollywood condition, not a PGT defect.
• Fogged IGUs on PGT retrofits into jalousie openings. Hollywood’s 1950s and 1960s CBS homes were built for jalousie louvers, and those original rough openings are rarely square. When a PGT fixed or single-hung unit goes into an out-of-square opening without proper shimming and flashing, the insulated glass unit fails within five to seven years. We see fogged WinGuard IGUs on Hollywood Hills retrofits all the time.
• Hinge binding on PGT WinGuard casements near the Intracoastal. Salt creep and debris work into the friction stays on casement hardware, and the hinges bind. The crank gets harder to turn, then the sash won’t seat, then the corner of the frame starts to pull. Inland crews rarely see this. In Hollywood, it’s a weekly call.
• Multi-point locking hardware binding on PGT entry doors. Older Hollywood foundations settle, and when they do, PGT 7700 swing doors flex. The multi-point lock engages, but the door still moves under wind load because the frame is no longer in plane with the slab movement. The fix is a frame adjustment and hardware re-alignment, not a new door, most times.
• Perimeter seal failure from original CBS framing gaps. When PGT products were retrofit into Hollywood’s post-war concrete block homes without framing remediation, the gap between the new frame and the old opening got caulked over instead of properly flashed. That seal fails, water gets in, and the window’s weather rating is gone. We re-seal the perimeter and, where needed, add proper flashing.

PGT Service in Hollywood: What Local Conditions Mean for Your Equipment

Here’s the thing most PGT owners in Hollywood don’t learn until an inspector shows up: even a PGT window that meets today’s HVHZ code can still fail a wind mitigation inspection if the original 1960s jalousie opening wasn’t structurally reinforced around the new frame. This isn’t a coastal condo problem. It’s a Hollywood-wide condition tied to the city’s concrete block post-war housing stock. The original jalousie openings were built to hold louvers, not an impact-rated window with a design pressure rating. If the framing around that opening was never brought up to current span and anchor requirements, the inspection fails, and the insurance credit goes away. That means the PGT job on a Hollywood Lakes bungalow often starts with framing remediation, not glass. Last month our tech pulled a PGT WinGuard single-hung from a 1972 CBS ranch in the Hollywood Hills grid near Johnson Street. The aluminum frame had salt creep on the interior locking points from three decades of coastal air, and the spiral balances had corroded so badly the sash wouldn’t stay up. We replaced the balances, treated all hardware with marine corrosion inhibitor, and re-sealed the perimeter. Then we flagged to the homeowner that three other windows on the east elevation showed the same early pitting, all from that original jalousie retrofit that never got proper flashing. That’s the Hollywood pattern, and you won’t read about it on a generic PGT page.

PGT Models & Products We Service in Hollywood

We service the full PGT line that’s common in Hollywood: WinGuard impact windows and doors, SpectraGuard casements and single-hungs, the 5500 series aluminum sliding doors that dominate older condo corridors, and 7700 series swing doors. When the original unit is still within its service life, we use PGT OEM hardware and seals and nothing else, because PGT’s weatherstripping and balance components are proprietary and aftermarket copies don’t seat correctly. For out-of-production lines like the old PGT Classic aluminum series, we turn to proven marine-grade aftermarket components and we’re honest when rail corrosion has crossed the point where repair makes sense. At that point, we recommend replacement, not patchwork.

PGT Service Pricing in Hollywood

FAQs - PGT Windows & Doors in Hollywood

Does a PGT WinGuard window installed in Hollywood automatically pass the HVHZ wind mitigation inspection?
No. The window itself may carry a Miami-Dade Notice of Acceptance, but the opening it’s installed into has to meet structural reinforcement requirements too. If the original jalousie framing was never brought up to code, the inspection can fail even with a brand-new WinGuard unit. We check the framing, not just the glass, before any retrofit. Call (754) 238-2201 for an exact assessment, and the estimate is free.

Why do PGT SpectraGuard casement windows near the Intracoastal in Hollywood bind and won’t close easily?
Salt creep and airborne debris collect inside the friction stays and hinge channels, and over a few years that grit turns into resistance. The crank gets stiff, then the sash won’t seat. We clean the hardware, replace any corroded friction stays with OEM parts, and re-lubricate with marine-grade corrosion inhibitor. It’s a repair we do in a single visit, and it’s far cheaper than replacing the sash.

Can you replace just the jalousie panes in a Hollywood CBS home with PGT impact glass, or do we have to replace the entire window?
You cannot replace individual jalousie louvers with PGT impact glass and get an HVHZ-compliant window. Jalousie frames were never designed to carry impact-rated glass, and the assembly won’t pass a wind mitigation inspection. The correct fix is replacing the entire jalousie unit with a PGT impact window that’s rated for the opening. Then we verify the rough opening is reinforced and flashing-corrected before installation.

How does the salt-air corrosion on PGT frames in Hollywood compare to inland Broward cities?
It’s measurably worse within a mile of the coast. In Hollywood, the Atlantic and the Intracoastal bracket the city, so salt-laden air reaches more homes than in inland Broward cities like Cooper City or Weston, or even compared to Pgt service in Plantation farther inland. We see PGT aluminum frames with significant pitting within a decade of installation along the A1A corridor. Inland, the same frame might go twenty years before showing the same wear. That’s why coastal Hollywood work leans so heavily on marine-grade or thermally broken aluminum systems rather than vinyl.

Will PGT’s warranty cover a failed IGU on my Hollywood WinGuard window if the frame is corroded?
It depends on the warranty language and the corrosion’s cause. PGT’s warranty covers manufacturing defects in the insulated glass unit, but if the frame failure came from salt-air corrosion or an improper retrofit into an out-of-square opening, the claim may be denied. We document every service call with photos and measurements so you can file a claim with evidence, and we register both warranty layers in writing before we leave the driveway.

Service Areas Near Hollywood

Our PGT service covers Hollywood proper plus the nearby communities our crews work in regularly. We also take PGT calls from Hollywood service area neighbors across Broward and southern Palm Beach. That includes homeowners from Dania Beach, Hallandale Beach, Pembroke Pines, Miramar, and Davie. We also serve PGT service in Holmes Beach for Gulf coast clients and PGT service in Homestead for South Miami-Dade PGT owners.

Book Your PGT Service in Hollywood Today

If your PGT window is fogged, your slider is binding, or an inspector flagged your wind mitigation report, call us - including for Pgt repair in Miami Gardens and throughout our service area. A live person answers (754) 238-2201, 24 hours a day, seven days a week. We’ll schedule a free estimate, measure twice, and tell you honestly whether it’s a repair or a replacement. Done right, in writing, no arguing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood since 2008.