PGT Windows & Doors in Lantana, FL

PGT Windows & Doors in Lantana, FL | TruePane Windows & Doors

We service, repair, and replace PGT impact windows and doors across Lantana, FL, as an independent provider. We are not a PGT dealer or manufacturer affiliate, which means our loyalty is to the homeowner and the structure, not a sales quota. The one thing that makes our PGT work different here is knowing that almost every job in Lantana involves salt-air corrosion, and a large share also involves converting original jalousie rough openings to accept modern impact-rated units. That combination does not exist a few miles inland, and it changes how we approach every service call. If you have a PGT window or door that is binding, corroding, or showing signs of wind-driven water intrusion, call us at (754) 238-2201.

Call (754) 238-2201

Why Lantana Residents Choose Us for PGT Service

Dale Kessler grew up in Kendall, back when that part of Miami-Dade was still mostly nurseries and canal roads, and he spent summers watching his father re-glaze storefronts along the Tamiami Trail before he ever picked up a paycheck. He has been measuring, sourcing, and setting windows and doors in South Florida for going on three decades, and the work he is best known for is impact-rated installations that pass inspection the first time and hold through the kind of August storm that sends neighbors back to the hardware store. That background matters in Lantana because PGT windows here fail differently than they do in Wellington or Royal Palm Beach. We know what to look for before we touch the frame. Our crews work exclusively on PGT impact-rated windows and doors across Palm Beach County, and in Lantana specifically, we handle the corrosion and masonry conversion details that generic installers miss. No authorization, just deep model-specific repair and replacement experience. And when you call, a live person answers, 24 hours a day, every day. Not a voicemail tree.

Common PGT Windows & Doors Problems We Solve in Lantana

PGT builds a solid impact window. Lantana’s location squeezes those windows harder than most places in Palm Beach County. Here are the failure modes we see on a routine basis.

• Salt-air pitting and flaking powder coat on PGT aluminum frame extrusions. Homes east of Dixie Highway, within a mile of the Intracoastal, get the worst of it. The onshore wind carries salt spray, and over years it eats through the factory finish. We see east-facing sliders with the most damage, especially along North 3rd Street and the streets running perpendicular to the waterway.
• Seized or stiff operators on PGT WinGuard casement and awning windows. Hardened salt accumulates in the hinge tracks and operator gears. The window still locks, but the crank fights you, then stops turning at all. Most of these are repairable with genuine PGT hardware and a thorough track cleaning, not a full replacement.
• Failed weatherstripping and corroded sill pans on older PGT sashes. Lantana summer squalls drive rain sideways. When the weatherstripping on a 15-year-old PGT sash goes, wind-driven water finds the gap and follows the sill pan right into the wall cavity or the floor. We replace the weatherstripping, treat the sill pan, and in severe cases rebuild the pan with marine-grade material.
• Out-of-square installation after jalousie-to-impact conversions. This is a Lantana-specific problem. Jalousie frames were cast directly into the concrete block without a standard wood buck. When a rushed crew jams a new PGT unit into that opening without properly re-bucking it, the sash binds, the frame racks, and sliding door rollers wear out in months instead of years. We grind and re-buck the opening before the new unit goes in, which is why our conversions hold square.
• Premature roller wear on PGT WinGuard aluminum sliding glass doors. Salt grit works its way into the roller tracks, and combined with an out-of-square frame, that grit becomes grinding paste. By the time a homeowner notices the door is hard to move, the rollers are usually shot. We replace them with marine-grade rollers when PGT parts are not rated for the salt load here.

PGT Service in Lantana: What Local Conditions Mean for Your Equipment

If you own a PGT window or door in Lantana, you are living with two forces working against you that do not apply in most of Palm Beach County. The first is salt. Lantana’s entire municipal footprint sits in a salt-air corrosion zone created by the Intracoastal Waterway on the eastern edge and the Atlantic less than a mile beyond. That means homes west of I-95 in Lantana get nearly the same salt exposure as waterfront homes in other towns. Aluminum frames, sill pans, fasteners, and roller hardware all corrode faster here than a few miles inland, and that holds true whether you are on the water or not. The second is the housing stock. Most of Lantana was built as concrete block stucco between the 1950s and early 1970s, and a huge share of those homes still carry original louvered jalousie windows with zero hurricane rating. Those jalousie frames were cast into the block without a standard buck, so converting to a PGT impact unit is never a straight swap. The crew has to cut, patch, and re-buck the masonry opening before the new window can even be test-fit. Nearby towns like Boynton Beach to the south or Lake Worth Beach to the north do not have this problem as uniformly across their housing stock. In Lantana, it is the default.

We recently replaced a corroded PGT WinGuard single-hung on North 3rd Street where the original aluminum frame had rotted through at the sill from years of Intracoastal salt spray. After cutting out the old unit, our crew spent two hours with a grinder and hydraulic hammer reshaping the eroded CBS rough opening before re-bucking it to accept the new PGT model. Then we re-treated the new frame with marine corrosion inhibitor and sealed the sill pan to keep the next salt cycle out. That is what a Lantana PGT job actually looks like when it is done right.

PGT Models & Products We Service in Lantana

We work on all the major PGT residential lines, including the WinGuard Vinyl Single-Hung, WinGuard Aluminum Sliding Glass Door, 700 Series Casement Window, and 400 Series Fixed Picture Window. We use genuine PGT replacement hardware and glass for warranty-safe repairs, but we will install quality marine-grade aftermarket fasteners and corrosion-inhibiting hardware when PGT parts are unavailable or unsuitable for Lantana’s salt zone. What we stock locally for fast turnaround are the common failure parts, rollers, hinges, balancers, weatherstripping, operator gears, and sill pan materials, specifically the ones that wear out fastest within a mile of the Intracoastal. We repair what can be saved. We recommend full replacement only when the frame itself is corroded through or the rough opening fails wind-load. You can also find more about our broader PGT sales & service work, which covers everything from single-sash repair to full-frame impact conversions.

PGT Service Pricing in Lantana

FAQs - PGT Windows & Doors in Lantana

Service Areas Near Lantana

TruePane Windows & Doors serves the full Lantana footprint and the surrounding coastal corridor. We routinely work in Lake Worth Beach, Boynton Beach, Hypoluxo, Manalapan, and South Palm Beach. Our Lantana service area coverage includes every neighborhood from the Intracoastal west to I-95. If you are just outside Lantana, we also have crews serving PGT service in Largo and PGT service in Lauderdale-by-the-Sea.

Book Your PGT Service in Lantana Today

If your PGT window or door is binding, corroding, or leaking, call us. We will send a uniformed, background-checked technician to measure every opening twice and put a written quote in your hand. The estimate is free, and the work carries the Done Right Promise. Call (754) 238-2201 to schedule yours.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lantana since 2008.