Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Windows & Doors in Oakland Park, FL | TruePane Windows & Doors
We service, repair, and replace PGT windows and doors throughout Oakland Park, with crews who understand the city’s 1950s-1970s CBS ranch stock better than any out-of-town outfit. For full replacements, see our Oakland Park Window Installation and door services. The thing that separates our PGT work here is this: we match every job to the installed unit’s Miami-Dade NOA rather than swapping in something close enough. If you’ve got a PGT WinGuard sash binding, an 8060 entry door leaking humidity, or a 5500 slider that won’t roll, call (754) 238-2201 for a straight answer and a written estimate.
Why Oakland Park Residents Choose Us for PGT Service
PGT builds impact windows in Florida, for Florida wind loads, and we’ve been setting and servicing their lines since the company first scaled up in the Southeast. But a PGT window installed in a 1963 Oakland Park ranch behaves differently than the same window hung in a new construction build in Weston. The rough opening isn’t square. The lintel bearing is short. The track collects forty years of sand and salt air. Dale Kessler, our owner, grew up in Kendall and trained at Miami Dade College’s vocational program, learning to read a rough opening the way a doctor reads an X-ray, slowly and without guessing. That’s the standard we bring to every PGT service call in Oakland Park: measure it right the first time, or plan on coming back. We keep genuine PGT hardware where the warranty sticker and NOA label are intact, and we’re honest when a frame is too far gone to save.
Common PGT Windows & Doors Problems We Solve in Oakland Park
- WinGuard single-hung tilt latches and balances binding mid-travel. Oakland Park’s oldest ranches carried jalousie louvers for decades, and that fine interior dust, mixed with salt-laden air off the Atlantic a few miles east, works its way into the balance channels. We clean, re-balance, and replace hardware with factory-profile parts so the sash stops sticking halfway.
- PGT 5500 Series slider rollers flattened on the heavy inboard panel. Sand blown inland from Dixie Highway landscaping and 1950s-era yard drainage settles into slider tracks on flat Oakland Park lots. Once rollers flatten, the panel drags and the lockset stops aligning. We replace the roller assemblies and dress the track before the frame takes permanent damage.
- Vinyl WinGuard miter-gap seal failures around full-wall replacement banks. 1960s CBS openings in Oakland Park are rarely square. The original masonry work was done fast during the inland Broward build-out, and over-shimming a new vinyl frame stresses the welds until the miter seals separate. We re-square what can be re-squared and replace what can’t, tied to the unit’s original NOA.
- PGT impact entry doors losing their bottom sweep on slab-on-grade ranches. Oakland Park’s flat lots hold water, and oak leaves pile against door thresholds every dry season. The bottom sweep on an 8060 Series French or entry door degrades, letting wind and humidity into the hinge-side frame. We replace sweeps, adjust thresholds, and verify the door’s pressure rating before we leave.
- Salt-crept casement hardware on east-facing elevations. An east-facing WinGuard casement in Oakland Park takes morning humidity that lingers through the workday. Hinges and operators corrode faster than on any other elevation, and the crank gets stiff even when the unit still seals. We pull the hardware, clean or replace it, and re-lubricate with a marine-grade compound that holds up in this air.
PGT Service in Oakland Park: What Local Conditions Mean for Your Equipment
Here’s what makes PGT service in Oakland Park different from any city around it, and the reason this page exists. Oakland Park is packed with 1950s-1970s CBS ranch homes whose original jalousie and single-pane aluminum slider windows are uninsurable under today’s Florida homeowner insurance market and non-compliant with current code. Because Broward County sits within Florida’s High-Velocity Hurricane Zone, every replacement window and door has to carry a Miami-Dade NOA or HVHZ Florida Product Approval. That disqualifies most standard window lines outright and makes PGT one of the few manufacturers whose full impact line is built for this exact corridor. But here’s what the generic PGT pages won’t tell you: Oakland Park’s overwhelming inventory of full-wall jalousie banks means most PGT impact jobs in this city require a rough-opening reconstruction that rebuilds the masonry sill and lintel to carry a 250+ psf design load. Neighboring Fort Lauderdale’s newer high-rise market almost never triggers that scope. In Oakland Park, it’s the standard job. A technician has to understand the difference before the first tool comes off the truck.
PGT Models & Products We Service in Oakland Park
We service the PGT WinGuard line, aluminum and vinyl, including single-hung, horizontal roller, and casement units, plus the PGT 5500 Series sliding glass doors, the 2500 and 5500 fixed and picture windows, and the 8060 Series impact French and entry doors. For full-service PGT work across Oakland Park, see our PGT sales & service page. We stock genuine PGT hardware and seal kits locally for fast turnaround on the most common Oakland Park repairs. Where PGT no longer supplies a part on out-of-production WinGuard lines, we source tested aftermarket balances, rollers, and weatherstripping whose profiles match the factory part, and we tell you before anything is ordered. We never claim OEM where PGT no longer supplies it.
PGT Service Pricing in Oakland Park
PGT window service in Oakland Park typically runs between $95 and $425 depending on scope. Hardware replacement (balances, tilt latches, rollers) generally sits between $95 and $325. Full sash rebuilds or structural frame repair on a WinGuard unit runs between $225 and $775. Glass replacement on an impact-rated unit runs between $350 and $1,200 per panel, and full-opening reconstruction with rough-opening rebuild, stucco repair, and new PGT impact installation runs between $2,800 and $8,500 per opening. These are honest ranges for Oakland Park’s CBS retrofit market, where framing scope is often unavoidable. Every estimate we write is line-item, in writing, and tied to the specific NOA for your installed unit. Call (754) 238-2201 to schedule a free estimate, and Dale will measure the opening himself.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Oakland Park
No. A full-wall jalousie bank in a 1960s Oakland Park CBS home cannot be brought into HVHZ compliance with any retrofit kit. The existing opening carries a lintel that was sized for lightweight aluminum louvers, not a 250+ psf impact-rated unit. The rough opening has to be rebuilt, usually with a steel angle and recast sill, before a PGT WinGuard unit can be set and approved. Call (754) 238-2201 and we’ll show you the opening’s load path and what the rebuild involves.
Because Oakland Park’s housing stock is mostly 1960s-1970s slab-on-grade CBS ranches with flat lots and settled concrete, Oakland Park Door Installation requires extra care. The door frame was rarely set dead level and square, and after decades of standing water, oak leaf buildup, and sand blown inland, the track sags and the panel no longer seats flush against the weatherstripping. An inspector sees daylight or feels a draft at the meeting stile and fails the opening. We re-set, re-shim, and re-level the frame, then replace the rollers and seals before re-inspection. Call (754) 238-2201 for a free estimate.
Yes. Every impact window installed in Oakland Park has to carry a Miami-Dade NOA or HVHZ Florida Product Approval number stamped on the frame or glass. PGT’s WinGuard line carries multiple NOAs depending on model and size. If you don’t see a visible approval label, or the label is illegible from salt exposure, the unit may not pass a wind mitigation inspection. We verify the NOA against the model and opening before any repair or replacement, and we register that documentation in writing as part of our Oakland Park service area standard.
That’s almost always corrosion or salt creep in the hinge and operator mechanism, not a seal failure. East-facing windows in Oakland Park collect morning humidity that lingers through the afternoon, and the metals in the crank assembly oxidize slowly. The glass and frame can still be sound while the hardware is seizing. We pull the hardware, clean or replace it, and re-lubricate with a compound rated for marine exposure. Call (754) 238-2201 and we’ll tell you on the phone whether it sounds like a hardware issue or something deeper.
Yes. Broward County and the City of Oakland Park require a permit for any window replacement that changes the opening or the glazing, including a one-for-one PGT swap on an existing CBS ranch. A true one-for-one replacement with no structural change still has to be documented because the new unit has to carry its own HVHZ product approval. We pull the permit, schedule the inspection, and register both warranty layers before the truck leaves the driveway. Call (754) 238-2201 and we’ll verify what your specific opening requires.
Service Areas Near Oakland Park
TruePane serves Oakland Park and the surrounding Broward communities, including Ocean Breeze, Ocean Ridge, Alafaya, Altamonte Springs, and Apollo Beach. If your PGT windows or doors are in one of those areas, we can help there too. See our PGT service in Ocean Breeze and PGT service in Ocean Ridge pages for coverage details.
Book Your PGT Service in Oakland Park Today
If your PGT window is binding, your slider won’t roll, or your entry door is leaking humidity, call (754) 238-2201. A live person answers, day or night. We’ll schedule your free estimate, and Dale will measure the opening himself.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Oakland Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After