Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Miami, FL | TruePane Windows & Doors
Geometric and shaped windows bring a level of architectural character that standard rectangles simply can’t match. Think hexagons above a front entry, a triangular transom crowning a stairwell, or a dramatic curved radius glass filling a gable. Here’s the catch in South Florida: most shaped windows sold elsewhere aren’t built for a hurricane zone. Ours are. TruePane Windows & Doors fabricates triangular, hexagonal, octagonal, and curved impact-glass configurations custom to your opening, then installs them to Miami-Dade and Florida Building Code HVHZ standards. From Coral Gables to Coconut Grove, we’ve helped Miami homeowners get the architectural detail they want without gambling on wind-zone protection. Call (754) 238-2201 to discuss your opening.
Product Overview - Geometric & Shaped Windows
Shaped windows are the hardest working design element in a Miami home. They admit light into spaces where a standard window won’t fit, they frame a view from a stair landing, and they give a façade a signature silhouette. But in a hurricane-prone region, a shaped window is only as good as the impact glass and frame engineering behind it. That’s where this product separates itself.
Our Geometric & Shaped Windows are custom-fabricated to your exact opening. We don’t force a stock shape into an opening that’s half an inch off. The frame is engineered around the glass configuration you need, whether that’s a true triangle above a picture window in Pinecrest, a hexagon in a Key Biscayne entry tower, or a radius curve on a Mediterranean-style home in the Roads. Every unit carries a design pressure matched to your specific wind zone, up to +/-100, never higher. That means the window is engineered for the actual forces your home faces, not an inflated number designed for marketing.
Aluminum and vinyl frame options give you flexibility. Aluminum suits the clean lines of modern Miami architecture and handles large spans well. Vinyl provides thermal performance and a lower profile in smaller openings. Both are fabricated around laminated impact glass with a PVB interlayer, the same core technology that keeps hurricane debris from breaching the building envelope. Custom fabrication means we also accommodate unusual sightlines, deep returns, and interior trim conditions that stock windows ignore.
Technical Specifications
- Frame materials: Aluminum or Vinyl, selected for the structural demands of your opening and the finish you want.
- Glass options: Laminated Impact Glass with PVB Interlayer, Low-E Insulated Glass, Tinted Glass, Clear Glass.
- Finish options: White, Almond, Bronze, Black, Tan.
- Maximum size: Custom fabricated to order. The opening dictates the size, not a catalog page.
- Design pressure: Matched to your wind zone, up to +/-100. Never higher.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to FBC HVHZ requirements.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass assembly uses a PVB (polyvinyl butyral) interlayer sandwiched between glass lites. Under missile impact, the glass may crack but the interlayer holds the fragments in place, keeping the building envelope intact and preventing wind-driven rain from pressurizing your interior. This is not a film applied after the fact. It’s the glass itself, built for the job.
Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Notice of Acceptance or Florida Product Approval number. These are not generic corporate documents. They’re issued per configuration, meaning the exact shape, frame, and glass combination you buy has been evaluated by the authority having jurisdiction in Miami-Dade County. Verify your specific configuration’s number on your quote.
FBC / HVHZ Compliance
These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Miami-Dade and Broward Counties sit inside the HVHZ, which is the most demanding wind-load standard in the state. A window that meets HVHZ compliance is a window built for the worst-case design event South Florida sees.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, meaning a real object propelled at the glass. TAS 202 covers cyclic wind-pressure loading, which simulates the repeated pulsating forces of a hurricane, not a single static push. TAS 203 covers forced-entry resistance. If a product carries a Miami-Dade NOA, it survived all three.
Design Pressure Matched to Your Wind Zone
We match design pressure to your actual wind zone, up to +/-100, and never higher. This matters more than people realize. A window over-rated for its location costs more without adding meaningful protection. A window under-rated for its location is a liability. Our team matches the rating to the structure, the exposure, and the code requirement for your Miami address.
Energy Performance Options
For shaped windows on sun-exposed elevations, Low-E insulated glass reduces solar heat gain while still meeting impact requirements. Tinted glass handles glare on west-facing gables. Clear laminated impact glass preserves true color transmission for windows framing landscape views. The glass choice is yours, and we’ll guide you through Miami’s sun-exposure realities during the consultation.
Color & Glass Options
The finish on a shaped window changes how the whole elevation reads. White and Almond blend quietly into painted trim, which suits Key Biscayne cottages and updated mid-century homes in Kendall. Bronze and Black create a defined, architectural frame around the glass, a look that pairs well with contemporary builds in Edgewater and Brickell. Tan fits the warm stucco tones common across Mediterranean-style Miami neighborhoods like Coral Way and Shenandoah.
Glass selection follows function. Clear laminated impact glass, when maximum light transmission and true color matter, as in a north-facing transom. Low-E insulated glass on south and west exposures where Miami’s afternoon sun works against your cooling load. Tinted glass on radius windows in gables where glare is a daily issue. We sample the glass options against your wall color and light exposure during the consultation, so you’re not choosing from a small chip on a clipboard.
Installation by TruePane Windows & Doors in Miami
A Miami-Dade NOA-rated shaped window installed poorly is just an expensive hole in the wall. The rating lives in the entire assembly: the glass, the frame, the anchoring, the perimeter seal. That’s why TruePane Windows & Doors handles every installation with our own crew, not a subcontractor rotating through three jobs a day.
We start with a pre-install inspection of the rough opening. Shaped openings are notorious for being out of square, and even a half-degree error in a triangle or radius compounds once the frame is set. We check the rough opening dimensions, the condition of the surrounding substrate, and the anchoring surface before ordering your window, because custom fabrication and bad measurements are a costly combination.
During installation, we set every unit level, plumb, and square, and we anchor per the NOA’s installation requirements. We apply AAMA 812 low-expansion foam perimeter sealant to create a continuous air and water barrier between the frame and rough opening. Our installation practice follows AAMA 2400/2410 standards, which address the realities of field installation in hurricane zones rather than ideal laboratory conditions. After the window is set and sealed, we run a water test at the perimeter to catch any infiltration at the time of install, not during the first summer storm.
Miami brings specific considerations. Coastal exposure means salt-driven corrosion on hardware and anchors, so material selection matters. Wind zones vary block by block, so anchoring and design pressure are matched to the actual site. And permitting in Miami-Dade means the NOA or Florida Product Approval number must be listed on the permit submittal. We’re familiar with the process and will supply the documentation your permit application requires.
Frequently Asked Questions - Geometric & Shaped Windows
Design pressures are matched to your specific wind zone, up to +/-100, and never higher. The exact rating on your window depends on the configuration, size, and location of the opening. We confirm the design pressure against your Miami address’s wind zone and exposure before we fabricate. Call (754) 238-2201 and we’ll pull the number for your opening.
Because every unit is custom-fabricated to your opening, lead time runs several weeks from final measurement and approval. Standard rectangular windows ship from stock. Shaped windows don’t. We’ll give you a firm production timeline on your quote, and we coordinate installation scheduling around it so you’re not living with a boarded-up opening longer than necessary.
Yes. In Miami-Dade and HVHZ jurisdictions, the permit application must reference the specific NOA or Florida Product Approval number for your window configuration. We supply that documentation with your quote and submittal package, and our install team is familiar with what local permit offices require. The approval number is per configuration, so it ties to your exact shape, frame, and glass, not a general product line.
Yes. Custom fabrication is the entire point of this product. Whether you need a specific triangle angle to match a roofline, a hexagon sized to a rough opening, or a curved radius that follows an arched entry, the window is fabricated to your opening. We take exact field measurements before fabrication and verify the opening geometry in person. A glass unit that doesn’t match the opening is useless, so we measure twice and cut once.
Maintenance is simple and infrequent. Clean the frames with mild soap and water, inspect the perimeter sealant annually for any cracking or separation, and keep weep holes clear if your configuration includes them. Salt exposure in coastal Miami neighborhoods can accelerate oxidation on aluminum finishes, so rinsing frames near the water a few times a year is smart. We’ll walk you through care during the final walkthrough.
Get a Quote - Geometric & Shaped Windows in Miami
If you’re planning a shaped window for a new build, a remodel, or to replace a unit that failed, let’s measure your opening and price it properly. Call TruePane Windows & Doors at (754) 238-2201 to schedule a free on-site measurement in Miami. You’ll get a written quote with your exact configuration, glass, finish, and design pressure listed plainly.
Written by the team at TruePane Windows & Doors, serving Miami, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
