Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSliding Glass & Patio Doors in Miami, FL | TruePane Windows & Doors
Sliding glass and patio doors do more than open a room to the backyard. In Miami, they’re a structural decision. The right system has to hold up to wind-driven rain, salt air, and the occasional direct hit from flying debris, all while gliding open with one hand on a Saturday morning. TruePane Windows & Doors supplies and installs large-span impact sliding door systems across Miami and the surrounding neighborhoods, from Coral Gables to Kendall to Pinecrest. We carry the PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and every sliding door we install is set, sealed, and anchored to Florida Building Code High-Velocity Hurricane Zone standards. Call (754) 238-2201 to talk through your opening.
Product Overview - Sliding Glass & Patio Doors
Our impact sliding doors are built around laminated glass panels riding on a reinforced track, engineered to the same wind-zone design pressure we specify for our impact window lines. That’s the important part: the door isn’t a weaker sibling to the window package. It’s the same performance envelope, just wider and moving.
These are large-span systems. We regularly install units up to 12 feet wide, which means a single opening can carry the visual weight of an entire back wall. In Miami’s modern and mid-century homes, that’s often exactly the goal: dissolve the line between the living room and the lanai, the kitchen and the pool deck. The frame does the real work. We offer aluminum for narrow sightlines and coastal durability, and vinyl where the priority is thermal performance and a softer profile against interior finishes.
Track configuration matters more than most homeowners expect. A 2-track system keeps the profile lean, with one fixed panel and one sliding panel. A 3-track system gives you two sliding panels and more ventilation flexibility when you want air moving through the house in the evening. Both are built on reinforced track extrusions designed to handle the weight of laminated impact glass without sagging or binding over time.
What makes these doors suited to hurricane-prone construction isn’t a single feature. It’s the layering: laminated glass that holds together under impact, interlocking meeting rails, a bottom track fastened to resist uplift, and a perimeter seal that keeps wind-driven water outside. TruePane Windows & Doors installs these systems across Dade County every week, and we’ll match the right configuration to your opening, not push the biggest door we can fit.
Technical Specifications
- Frame materials: Aluminum and vinyl, selected by opening size and exposure
- Maximum width: 12 feet, depending on configuration and design pressure
- Track configurations: 2-track (one fixed, one sliding panel) and 3-track (two sliding panels)
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
- Finish options: White, almond, bronze, black, tan
- Screen options: Retractable screen, sliding screen
- Design pressure: Matched to your wind zone, up to +/-100 psf, never higher than required
- Compliance: Miami-Dade NOA and Florida Product Approval available per configuration; engineered to FBC HVHZ requirements
Hurricane & Compliance Performance
Laminated Impact Glass
The glass in these doors is laminated with a PVB (polyvinyl butyral) interlayer, the same technology used in automotive windshields. Under impact, the glass may crack, but the interlayer holds the broken pieces in the frame. That means the opening stays sealed during a storm instead of becoming a breach that pressurizes your house and lifts the roof.
Miami-Dade NOA / Florida Product Approval
These sliding door systems carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers, issued per configuration. The specific approval number depends on the exact size, frame material, and glass package you choose. We verify every detail on your written quote before you sign, and your permit submittal will reference the correct product approval.
Florida Building Code HVHZ Compliance
The systems are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That means the frame, glass, and anchoring have all been evaluated for the wind environment Miami actually lives in, not a generic coastal standard borrowed from another state.
TAS 201 / TAS 202 / TAS 203 Testing
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact: a 2×4 fired at the glass. TAS 202 covers cyclic wind-pressure loading: repeated pressure cycles that mimic a storm’s gusts. TAS 203 covers forced-entry resistance. When we say a door is HVHZ-rated, this is the battery of tests behind that phrase.
Design Pressure Matched to Your Zone
We specify design pressures matched to your wind zone, up to +/-100 psf, never higher. Buying a door rated far above what your home requires doesn’t make it safer. It makes it heavier, harder to open, and more expensive. We match the door to the actual exposure, and we’ll show you the wind zone calculation for your address.
Low-E and Insulated Glass Options
For openings that face afternoon sun or air-conditioned rooms that run constantly, Low-E and insulated glass packages are available. These options reduce solar heat gain while keeping the impact-rated performance of the laminated outer lite. We’ll walk through the tradeoffs for your specific elevation.
Color & Glass Options
The finish colors we offer, white, almond, bronze, black, and tan, cover most of Miami’s architectural language. White and almond fit the clean stucco homes common in Westchester and West Miami. Bronze and black frames read as nearly invisible from inside, which is what most modern builds in the Design District and Edgewater want. Tan lands somewhere warmer, working well on terracotta-trimmed Mediterranean homes in Coral Gables and Coconut Grove.
Glass choice follows what the door needs to do. Clear laminated impact glass is the most honest option: maximum light, zero tint shift, and full impact protection. Tinted glass cuts afternoon glare and solar heat in west-facing openings. Low-E insulated glass is the choice when the door faces direct sun and the room behind it is air-conditioned. We’ll show you samples and help you decide what makes sense for each elevation.
Installation by TruePane Windows & Doors in Miami
An impact sliding door is only as good as its installation. The NOA rating assumes the frame is anchored, shimmed, and sealed exactly as the approval drawings specify. A sloppy install voids that math, and no glass package fixes a poorly set frame.
Our process starts with a pre-install inspection. We measure the rough opening, check the subfloor and header condition, and verify the existing anchoring points before we order anything. On install day, we set the frame level, plumb, and square, that’s non-negotiable because even a quarter-inch of rack will make a 12-foot sliding panel fight the track for the rest of its life. We follow AAMA 2400 and 2410 installation practice throughout, and we use AAMA 812 low-expansion foam for the perimeter seal. That foam matters in Miami: it seals against wind-driven rain but won’t expand enough to bow the frame.
Once the frame is anchored and the panels are set, we run a final water test, adjust the rollers, and walk you through how the door should feel when it’s right. Cleanup is part of the job, not an afterthought.
Miami-specific realities shape all of this. Coastal exposure means corrosion resistance matters on every fastener and anchor we choose. Wind zone calculations vary block by block, sometimes door by door on the same street. And if your city or the county requires a permit, the submittal package has to reference the right NOA and Florida Product Approval numbers for your exact configuration. TruePane Windows & Doors handles that documentation as part of the project. Improper installation compromises an NOA-rated system, which is exactly why we don’t hand this work to a general handyman crew.
Frequently Asked Questions - Sliding Glass & Patio Doors
We match design pressure to your specific wind zone in Miami, up to +/-100 psf, never higher. The exact rating depends on your address, opening size, and frame configuration, and we’ll show you the wind zone calculation when we quote the project. Call (754) 238-2201 and we’ll pull your address up.
Lead times typically run several weeks from signed quote to install, depending on the manufacturer line and whether the configuration is custom. The most accurate answer comes from a quick conversation about the size and glass package you need. Call (754) 238-2201 for current lead times on the PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines.
Yes, HVHZ jurisdictions in Miami require the correct NOA or Florida Product Approval number for the exact door configuration you’re installing. TruePane Windows & Doors includes the approval documentation in your permit package, so the submittal matches what actually gets installed. Call (754) 238-2201 and we’ll walk you through what your city or the county asks for.
Most sizes and configurations are available within the structural limits of the system, up to 12 feet wide, in 2-track or 3-track layouts. Custom sizing usually means adjusting panel width or frame color rather than re-engineering the door. Call (754) 238-2201 with your rough opening dimensions and we’ll tell you what fits.
Keep the bottom track clear of sand and debris, especially in Miami where beach grit and construction dust collect fast. Wipe the track with a dry cloth, avoid heavy grease on the rollers, and rinse the frame a few times a year, more often within a few blocks of the ocean. If the door starts to feel stiff or uneven, don’t force it, call (754) 238-2201 and we’ll send someone out.
Get a Quote - Sliding Glass & Patio Doors in Miami
If you’re replacing an old patio slider or planning a new opening, we’ll measure it, spec the right door, and give you a written line-item quote. Call TruePane Windows & Doors at (754) 238-2201 to schedule a free on-site measurement in Miami. Estimates are free, and the quote includes the NOA documentation for your permit.
Written by the team at TruePane Windows & Doors, serving Miami, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
