Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Boulevard Gardens
Custom windows and doors in Boulevard Gardens are not a one-size-fits-all job, and they cannot be handled like work in the rest of Broward County. Every unit installed here must carry the separate HVHZ (High-Velocity Hurricane Zone) line on its product approval document. A standard Florida Product Approval is not enough to pass a permit inspection in this ZIP code. We know that because we have pulled permits here, stood beside inspectors here, and fixed the work of companies that did not understand the rule before they started. If you are in Boulevard Gardens and need a custom window or door priced honestly, call (754) 238-2201. We answer the phone with a person, and we show up when we say we will.
Why TruePane Windows & Doors Is Boulevard Gardens’s Preferred Custom Windows & Doors Company
We have been installing and replacing windows and doors in South Florida since 2008, and the bulk of what we know about masonry-block homes comes from the exact housing stock that fills Boulevard Gardens. Those CBS ranch houses from the 1950s through the 1970s have fixed concrete rough openings. They do not forgive a window that is ordered a half-inch out of square. Our Custom Windows & Doors team measures each opening twice, every time, because a mis-measured unit on a block home means chipping out masonry, not just shimming a wood frame.
Dale Kessler founded this company on a rule he keeps on the whiteboard: if the pane is not true, the job is not done. That rule carries through every install in Boulevard Gardens. Homeowners here tell us the same thing, year after year: they got burned once by a contractor who cut a corner, and they will not get burned twice. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and every job carries our Done Right Promise. If it is not done right, we make it right. No paperwork, no arguing.
Response time to Boulevard Gardens matters because the neighborhood sits in the heart of Broward, and we dispatch crews from our South Florida office with local scheduling. You will not wait a week for someone to look at a fogged sealed unit or a door that binds in July. Call the number, a person answers, and we schedule around your life, not ours.
Our Custom Windows & Doors Services in Boulevard Gardens
Custom Shape Windows
Boulevard Gardens block homes sometimes have windows that no big-box store has carried in forty years. Arched tops, trapezoids, fixed porthole units, and odd lite patterns on front elevation windows are common here because the mid-century builders favored them as a way to break up flat stucco facades. We order custom shape windows sized to the actual opening, with HVHZ product approval on the paperwork, and we anchor them into block with stainless fasteners. Off-the-shelf does not work in a fixed masonry opening, and that is a fact we have seen play out many times in this neighborhood specifically.

Commercial Storefront Glazing
Storefront glass along the commercial corridors near Boulevard Gardens takes a beating from salt air and afternoon sun. The aluminum framing on older storefront systems pits within a few years if the original installation used non-marine-grade hardware. We replace storefront glass and framing with finishes rated for coastal Broward, and we time the work around your operating hours so you lose as little business as possible. The code requirements are the same here as any HVHZ commercial job: the glazing system must carry the right NOA or Miami-Dade approval, or the inspector will not sign off.

Curtain Wall Systems
Low-rise commercial buildings in and around Boulevard Gardens occasionally use curtain wall assemblies, and the failure pattern we see most is water intrusion at the joints because the original flashing tape failed behind the frame. Salt air accelerates the corrosion on the anchor hardware. We specify stainless and hot-dip galvanized fasteners on every curtain wall project, and we run continuous sealant lines instead of relying on old backer rod that has hardened. If the existing system was installed ten or fifteen years ago, the best value is usually a full reframe with modern thermal breaks, not a patch-and-pray repair.

Architectural Grilles & SDLs
Simulated divided lites give a Boulevard Gardens ranch house the feel of a true divided window without the maintenance. We install SDLs and architectural grilles inside the glass on Andersen, Marvin, and PGT impact units, and we match the lite pattern so the street-facing elevation looks consistent. Homeowners on NW 27th Terrace and the surrounding blocks often ask us to match the look of original 1960s single-hung windows, which we do with grille profiles that read correct from the sidewalk. The payback is a home that looks the way it did when it was built, but with a sealed, impact-rated unit behind it.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boulevard Gardens
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, ES Windows, and ECO Window Systems. What that means in Boulevard Gardens is simple: we can put two or three side-by-side quotes on paper for the same size custom opening, and you can see exactly what each line costs. No vague talk about “a good window.” If you have an existing impact unit from PGT or CGI that needs a seal repair or hardware replacement, we stock common local parts for those brands and can turn most service calls around without waiting on a freight shipment. For block-home custom openings, we tend to specify PGT and ES Windows because their HVHZ approvals are clean and their frame profiles fit masonry rough openings without extra trim work.
Common Custom Windows & Doors Problems We See in Boulevard Gardens Homes
- Salt air pitting on aluminum frames at the corners. The fusion-welded corners on non-marine-grade aluminum windows start to pit and bind within five years here. We see this on homes throughout Boulevard Gardens where the original 1960s aluminum held up only because it was made thicker than anything sold today, but the replacement windows installed fifteen years ago are already failing.
- Jalousie windows that cannot pass code or an insurance inspection. The louvered glass has a near-zero wind rating, and homeowners who call us asking for glass-only replacement get the truth: a jalousie cannot be made hurricane-ready. It is a full window replacement, and the sooner we start, the sooner the house is actually protected.
- Fogged insulated glass units from flashing tape that wicks moisture. A masonry opening with standard flashing tape and non-stainless fasteners will pull moisture behind the stucco, and the sealed unit fogs within a few seasons. We see this on block ranches across Boulevard Gardens, particularly on the east and north elevations that catch the morning humidity.
- Doors that bind in July. Concrete block homes shift with heat and moisture. A slab door that swings fine in January can bind in July. We fix this with proper hinge and frame alignment, and we replace the weatherstripping with a compressible type that does not turn brittle in the salt air.
Pricing for Custom Windows & Doors in Boulevard Gardens, FL
You should know what custom windows and doors actually cost in this market before you start collecting bids. A single custom shape window in Boulevard Gardens, ordered to size and anchored into block with HVHZ paperwork, typically runs $900 to $1,800 per unit installed. An oversized glass panel for a living room wall or patio opening runs $2,200 to $4,500. A full jalousie-to-impact replacement on a small concrete block ranch, depending on opening count, usually lands between $7,000 and $16,000. The price gap between a coastal-spec unit and an inland-spec unit is real. Cheap aluminum with a standard Florida Product Approval might save $350 per window up front. It fails the Boulevard Gardens permit inspection, and the same economy shows up again in five years as pitted corners and a fogged seal. We give you a written, line-item quote with both warranty layers registered, and we charge what we quote. Call (754) 238-2201 for a free estimate.
We Also Serve Cities Near Boulevard Gardens
TruePane handles custom windows and doors across the wider area, so if you are near Boulevard Gardens but on the edge of it, we still cover you. We schedule the same way in Anna Maria, Acacia Villas, Alafaya, and Altamonte Springs, with the same HVHZ knowledge and the same written warranty registration. Response time is not a second thought, and the pricing does not change because the truck drove an extra ten minutes.
Serving Boulevard Gardens, FL - Our Local Coverage Area
We’re based in the Boulevard Gardens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Boulevard Gardens
Boulevard Gardens sits inside Broward County’s High-Velocity Hurricane Zone, which is the strictest wind-load class in the Florida Building Code. A window that carries a valid statewide Florida Product Approval is not enough. The approval document must have a separate HVHZ line on it, or a Miami-Dade NOA with HVHZ designation. Inspectors here check that specific line, and a contractor who sources units approved only for the rest of Florida will get the whole permit rejected. Call (754) 238-2201 and we will pull the right approvals before we order a single unit.
No. Original 1950s and 1960s jalousie windows in Boulevard Gardens have a near-zero wind rating, and the louvered frame cannot hold impact glass in a way that passes an HVHZ inspection or satisfies your insurer. Glass-only replacement is a repair that will not pass code and will not lower your insurance. Full impact-rated replacement is the honest fix. We will show you the difference in writing, with pricing for both the cheap repair and the compliant replacement.
Salt air accelerates oxidation on aluminum frame corners and jamb hardware. Within five years, a non-marine-grade unit shows pitting, the corners bind, and the weatherstripping turns brittle. Marine-grade finishes and stainless fasteners are not an upcharge we recommend; they are the material spec that survives this ZIP code. The cheap inland-spec frame costs less now and gets replaced within a decade. Call (754) 238-2201 for a quote that uses the right material the first time.
The fixed concrete and masonry rough openings on 1950s to 1970s CBS ranches here were framed to sizes no big-box retailer stocks. An off-the-shelf unit does not fit without chipping masonry, and a unit that is forced into the opening leaks around the frame and voids the manufacturer’s warranty. We measure every opening twice and order to the actual dimension. We replaced a row of original 1960s jalousie windows on a concrete block ranch on NW 27th Terrace with custom impact-rated casements from Andersen’s HVHZ line, anchored into the block with stainless steel fasteners because the old aluminum frames had already corroded and the weatherstripping had crumbled. The inspector flagged the first submitted approval for lacking the HVHZ mark, and we swapped the unit for a Marvin with the proper NOA before the permit cleared. That is the difference between measuring once and measuring right.
Yes. Several insurance carriers writing policies in Boulevard Gardens ZIP codes now require proof of impact-rated openings at renewal, and a homeowner with original jalousie or non-impact single-pane windows gets a higher premium or a non-renewal notice. Full HVHZ impact replacement satisfies the insurer’s wind-mitigation requirement and typically lowers the wind premium. We provide the documentation your insurer wants, including the NOA or HVHZ Florida Product Approval number, on every unit we install. Call (754) 238-2201. A person answers, and the estimate is free.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boulevard Gardens and the surrounding Broward County area with years of glazing craft.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After